# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5696 and similar I2C multi-channel DACs
maintainers:
- Michael Auchter <michael.auchter@ni.com>
description: |
Binding for Analog Devices AD5696 and similar multi-channel DACs
properties:
compatible:
enum:
- adi,ad5311r
- adi,ad5316r
- adi,ad5337r
- adi,ad5338r
- adi,ad5671r
- adi,ad5673r
- adi,ad5675
- adi,ad5675r
- adi,ad5677r
- adi,ad5691r
- adi,ad5692r
- adi,ad5693
- adi,ad5693r
- adi,ad5694
- adi,ad5694r
- adi,ad5695r
- adi,ad5696
- adi,ad5696r
- adi,ad5697r
reg:
maxItems: 1
vdd-supply:
description: Input power supply.
vlogic-supply:
description:
Digital power supply. On some tiny package variants for single-channel
devices, this supply is internally connected to vdd; in that case, specify
this property with the same regulator as vdd.
vref-supply:
description:
Reference voltage supply. If not supplied the internal reference is used.
vcc-supply:
deprecated: true
description: Use vref-supply instead.
reset-gpios:
description: Active-low RESET pin to reset the device.
maxItems: 1
ldac-gpios:
description:
Active-low LDAC pin used to asynchronously update the DAC channels.
maxItems: 1
gain-gpios:
description:
GAIN pin that sets a multiplier for the DAC output voltage. When high,
the DAC output voltage is multiplied by 2, otherwise it is unchanged.
maxItems: 1
adi,range-double:
description:
Sets the initial voltage output range from 0 to 2xVREF. On devices that
have a GAIN pin and no gain-gpios property is set, this indicates the pin
is hardwired high.
type: boolean
required:
- compatible
- reg
- vdd-supply
- vlogic-supply
allOf:
- if:
properties:
compatible:
contains:
enum:
- adi,ad5675
- adi,ad5693
- adi,ad5694
- adi,ad5696
then:
required:
- vref-supply
- if:
properties:
compatible:
contains:
enum:
- adi,ad5311r
- adi,ad5691r
- adi,ad5692r
- adi,ad5693
- adi,ad5693r
then:
properties:
gain-gpios: false
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
ad5696: dac@0 {
compatible = "adi,ad5696";
reg = <0>;
vdd-supply = <&dac_vdd>;
vlogic-supply = <&dac_vlogic>;
vref-supply = <&dac_vref>;
ldac-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
};
...