// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com> */ /dts-v1/; /* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ #include "meson-g12b-a311d.dtsi" #include "meson-g12b-odroid.dtsi" / { compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2L"; sound { compatible = "amlogic,axg-sound-card"; model = "ODROID-N2L"; audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", "TDMIN_A IN 4", "TDM_B Loopback", "TDMIN_B IN 4", "TDM_B Loopback", "TDMIN_C IN 4", "TDM_B Loopback", "TDMIN_LB IN 1", "TDM_B Loopback", "TODDR_A IN 0", "TDMIN_A OUT", "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT", "TODDR_A IN 1", "TDMIN_B OUT", "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT", "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", "TODDR_A IN 6", "TDMIN_LB OUT", "TODDR_B IN 6", "TDMIN_LB OUT", "TODDR_C IN 6", "TDMIN_LB OUT"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; assigned-clock-parents = <0>, <0>, <0>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; dai-link-0 { sound-dai = <&frddr_a>; }; dai-link-1 { sound-dai = <&frddr_b>; }; dai-link-2 { sound-dai = <&frddr_c>; }; dai-link-3 { sound-dai = <&toddr_a>; }; dai-link-4 { sound-dai = <&toddr_b>; }; dai-link-5 { sound-dai = <&toddr_c>; }; /* 8ch hdmi interface */ dai-link-6 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; dai-tdm-slot-tx-mask-1 = <1 1>; dai-tdm-slot-tx-mask-2 = <1 1>; dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; codec { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; }; /* hdmi glue */ dai-link-7 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; }; }; ð_phy { status = "disabled"; }; &vddcpu_a { regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; pwms = <&pwm_ab 0 1500 0>; }; &vddcpu_b { regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; pwms = <&pwm_AO_cd 1 1500 0>; }; &usb2_phy0 { phy-supply = <&usb_pwr_en>; }; &usb2_phy1 { phy-supply = <&usb_pwr_en>; };