# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2022, 2026 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP S32G2 pin controller
maintainers:
- Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
- Chester Lin <chester62515@gmail.com>
description: |
S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
whose memory map is split into two regions:
SIUL2_0 @ 0x4009c000
SIUL2_1 @ 0x44010000
Every SIUL2 region has multiple register types. MSCR and IMCR registers
need to be revealed for kernel to configure pinmux. PGPDO and PGPDI
registers are used for GPIO output/input operations. EIRQ registers
are used for external interrupt configuration.
Please note that some register indexes are reserved in S32G2, such as
MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
properties:
compatible:
enum:
- nxp,s32g2-siul2-pinctrl
reg:
minItems: 6
description: |
A list of MSCR/IMCR/PGPDO/PGPDI/EIRQ register regions to be reserved.
- MSCR (Multiplexed Signal Configuration Register)
An MSCR register can configure the associated pin as either a GPIO pin
or a function output pin depends on the selected signal source.
- IMCR (Input Multiplexed Signal Configuration Register)
An IMCR register can configure the associated pin as function input
pin depends on the selected signal source.
- PGPDO (Parallel GPIO Pad Data Out Register)
A PGPDO register is used to set the output value of a GPIO pin.
- PGPDI (Parallel GPIO Pad Data In Register)
A PGPDI register is used to read the input value of a GPIO pin.
- EIRQ (External Interrupt Request)
EIRQ registers are used to configure and manage external interrupts.
items:
- description: MSCR registers group 0 in SIUL2_0
- description: MSCR registers group 1 in SIUL2_1
- description: MSCR registers group 2 in SIUL2_1
- description: IMCR registers group 0 in SIUL2_0
- description: IMCR registers group 1 in SIUL2_1
- description: IMCR registers group 2 in SIUL2_1
- description: PGPDO registers in SIUL2_0
- description: PGPDI registers in SIUL2_0
- description: PGPDO registers in SIUL2_1
- description: PGPDI registers in SIUL2_1
- description: EIRQ registers in SIUL2_1
gpio-controller: true
"#gpio-cells":
const: 2
gpio-ranges:
minItems: 1
maxItems: 4
interrupt-controller: true
"#interrupt-cells":
const: 2
interrupts:
maxItems: 1
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'-grp[0-9]$':
type: object
allOf:
- $ref: pinmux-node.yaml#
- $ref: pincfg-node.yaml#
description: |
Pinctrl node's client devices specify pin muxes using subnodes,
which in turn use the standard properties below.
properties:
bias-disable: true
bias-high-impedance: true
bias-pull-up: true
bias-pull-down: true
drive-open-drain: true
input-enable: true
output-enable: true
pinmux:
description: |
An integer array for representing pinmux configurations of
a device. Each integer consists of a PIN_ID and a 4-bit
selected signal source(SSS) as IOMUX setting, which is
calculated as: pinmux = (PIN_ID << 4 | SSS)
slew-rate:
description: Supported slew rate based on Fmax values (MHz)
enum: [83, 133, 150, 166, 208]
additionalProperties: false
required:
- compatible
- reg
oneOf:
- description: Legacy pinctrl-only node
properties:
reg:
maxItems: 6
gpio-controller: false
"#gpio-cells": false
gpio-ranges: false
interrupt-controller: false
"#interrupt-cells": false
interrupts: false
- description: Pinctrl node with GPIO and external interrupt support
required:
- gpio-controller
- "#gpio-cells"
- gpio-ranges
- interrupt-controller
- "#interrupt-cells"
- interrupts
properties:
reg:
minItems: 11
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
pinctrl: pinctrl@4009c240 {
compatible = "nxp,s32g2-siul2-pinctrl";
/* MSCR0-MSCR101 registers on siul2_0 */
reg = <0x4009c240 0x198>,
/* MSCR112-MSCR122 registers on siul2_1 */
<0x44010400 0x2c>,
/* MSCR144-MSCR190 registers on siul2_1 */
<0x44010480 0xbc>,
/* IMCR0-IMCR83 registers on siul2_0 */
<0x4009ca40 0x150>,
/* IMCR119-IMCR397 registers on siul2_1 */
<0x44010c1c 0x45c>,
/* IMCR430-IMCR495 registers on siul2_1 */
<0x440110f8 0x108>,
/* PGPDO registers on siul2_0 */
<0x4009d700 0x10>,
/* PGPDI registers on siul2_0 */
<0x4009d740 0x10>,
/* PGPDO registers on siul2_1 */
<0x44011700 0x18>,
/* PGPDI registers on siul2_1 */
<0x44011740 0x18>,
/* EIRQ registers on siul2_1 */
<0x44010010 0x34>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 102>,
<&pinctrl 112 112 79>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
llce-can0-pins {
llce-can0-grp0 {
pinmux = <0x2b0>;
input-enable;
slew-rate = <208>;
};
llce-can0-grp1 {
pinmux = <0x2c2>;
output-enable;
slew-rate = <208>;
};
};
};
...