# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/ti/davinci/ti,da850-pll.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DaVinci PLL Controllers
maintainers:
- David Lechner <david@lechnology.com>
description:
The PLL provides clocks to most of the components on the SoC. In addition to
the PLL itself, this controller also contains bypasses, gates, dividers, an
multiplexers for various clock signals.
properties:
compatible:
enum:
- ti,da850-pll0
- ti,da850-pll1
reg:
maxItems: 1
clocks:
minItems: 1
items:
- description: Primary reference clock input
- description: External clock source
clock-names:
minItems: 1
items:
- const: clksrc
- const: extclksrc
ti,clkmode-square-wave:
type: boolean
description:
Indicates that the board is supplying a square wave input on the OSCIN
pin instead of using a crystal oscillator.
pllout:
type: object
description:
Main PLL clock output before POSTDIV.
properties:
'#clock-cells':
const: 0
required:
- '#clock-cells'
additionalProperties: false
sysclk:
type: object
description:
PLLDIVn divider clocks that provide the SYSCLKn clock domains. Consumers
of this node should use "n" in "SYSCLKn" as the index parameter for the
clock cell.
properties:
'#clock-cells':
const: 1
required:
- '#clock-cells'
additionalProperties: false
auxclk:
type: object
description:
AUXCLK output of the PLL
properties:
'#clock-cells':
const: 0
required:
- '#clock-cells'
additionalProperties: false
obsclk:
type: object
description:
the OBSCLK output of the PLL.
properties:
'#clock-cells':
const: 0
required:
- '#clock-cells'
additionalProperties: false
required:
- compatible
- reg
- clocks
- clock-names
additionalProperties: false
allOf:
- if:
properties:
compatible:
const: ti,da850-pll1
then:
properties:
clocks:
maxItems: 1
clock-names:
maxItems: 1
ti,clkmode-square-wave: false
auxclk: false
examples:
- |
clock-controller@11000 {
compatible = "ti,da850-pll0";
reg = <0x11000 0x1000>;
clocks = <&ref_clk>, <&pll1_sysclk 3>;
clock-names = "clksrc", "extclksrc";
ti,clkmode-square-wave;
pllout {
#clock-cells = <0>;
};
sysclk {
#clock-cells = <1>;
};
auxclk {
#clock-cells = <0>;
};
obsclk {
#clock-cells = <0>;
};
};
- |
clock-controller@21a000 {
compatible = "ti,da850-pll1";
reg = <0x21a000 0x1000>;
clocks = <&ref_clk>;
clock-names = "clksrc";
sysclk {
#clock-cells = <1>;
};
obsclk {
#clock-cells = <0>;
};
};