// SPDX-License-Identifier: GPL-2.0-only /* * * OMAP SRAM detection and management * * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * * Copyright (C) 2009-2012 Texas Instruments * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> #include <linux/set_memory.h> #include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> #include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "sdrc.h" #include "sram.h" #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) #define SRAM_BOOTLOADER_SZ 0x00 #define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) #define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) #define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) #define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) #define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) #define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) #define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) #define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) #define GP_DEVICE 0x300 #define ROUND_DOWN(value, boundary) ((value) & (~((boundary) - 1))) static unsigned long omap_sram_start; static unsigned long omap_sram_size; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static void __iomem *omap_sram_ceil; /* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * * Note that fncpy requires the returned address to be aligned * to an 8-byte boundary. */ static void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); return NULL; } new_ceil -= size; new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); omap_sram_ceil = IOMEM(new_ceil); return (void __force *)omap_sram_ceil; } void *omap_sram_push(void *funcp, unsigned long size) { void *sram; unsigned long base; int pages; void *dst = NULL; sram = omap_sram_push_address(size); if (!sram) return NULL; base = (unsigned long)sram & PAGE_MASK; pages = PAGE_ALIGN(size) / PAGE_SIZE; set_memory_rw(base, pages); dst = fncpy(sram, funcp, size); set_memory_rox(base, pages); return dst; } /* * The SRAM context is lost during off-idle and stack * needs to be reset. */ static void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; } /* * Depending on the target RAMFS firewall setup, the public usable amount of * SRAM varies. The default accessible size for all device types is 2k. A GP * device allows ARM11 but not other initiators for full size. This * functionality seems ok until some nice security API happens. */ static int is_sram_locked(void) { if (omap_type() == OMAP2_DEVICE_TYPE_GP) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } if (cpu_is_omap34xx()) { writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2); writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); } return 0; } else return 1; /* assume locked with no PPA or security driver */ } /* * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. */ static void __init omap_detect_sram(void) { omap_sram_skip = SRAM_BOOTLOADER_SZ; if (is_sram_locked()) { if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PUB_PA; if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } } else { omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else { omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) omap_sram_size = 0xa0000; /* 640K */ else if (cpu_is_omap243x()) omap_sram_size = 0x10000; /* 64K */ } } } /* * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ static void __init omap2_map_sram(void) { unsigned long base; int pages; int cached = 1; if (cpu_is_omap34xx()) { /* * SRAM must be marked as non-cached on OMAP3 since the * CORE DPLL M2 divider change code (in SRAM) runs with the * SDRAM controller disabled, and if it is marked cached, * the ARM may attempt to write cache lines back to SDRAM * which will cause the system to hang. */ cached = 0; } if (omap_sram_size == 0) return; omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached); if (!omap_sram_base) { pr_err("SRAM: Could not map\n"); return; } omap_sram_reset(); /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ memset_io(omap_sram_base + omap_sram_skip, 0, omap_sram_size - omap_sram_skip); base = (unsigned long)omap_sram_base; pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; set_memory_rox(base, pages); } static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock) { BUG_ON(!_omap2_sram_ddr_init); _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, base_cs, force_unlock); } static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, u32 mem_type); void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) { BUG_ON(!_omap2_sram_reprogram_sdrc); _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); } static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) { BUG_ON(!_omap2_set_prcm); return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); } #ifdef CONFIG_SOC_OMAP2420 static int __init omap242x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, omap242x_sram_ddr_init_sz); _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, omap242x_sram_reprogram_sdrc_sz); _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, omap242x_sram_set_prcm_sz); return 0; } #else static inline int omap242x_sram_init(void) { return 0; } #endif #ifdef CONFIG_SOC_OMAP2430 static int __init omap243x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, omap243x_sram_ddr_init_sz); _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, omap243x_sram_reprogram_sdrc_sz); _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, omap243x_sram_set_prcm_sz); return 0; } #else static inline int omap243x_sram_init(void) { return 0; } #endif #ifdef CONFIG_ARCH_OMAP3 void omap3_sram_restore_context(void) { omap_sram_reset(); omap_push_sram_idle(); } static inline int omap34xx_sram_init(void) { omap3_sram_restore_context(); return 0; } #else static inline int omap34xx_sram_init(void) { return 0; } #endif /* CONFIG_ARCH_OMAP3 */ int __init omap_sram_init(void) { omap_detect_sram(); omap2_map_sram(); if (cpu_is_omap242x()) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); return 0; }