// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "shikra.dtsi"
#include "pm4125.dtsi"
#include "pm8005.dtsi"
/ {
aliases {
serial1 = &uart8;
};
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-0 = <&vol_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
gpios = <&pm4125_gpios 9 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
linux,can-disable;
};
};
msm_therm_bridge: msm-therm-bridge {
compatible = "generic-adc-thermal";
io-channels = <&pm4125_adc ADC5_AMUX_THM3_100K_PU>;
io-channel-names = "sensor-channel";
#thermal-sensor-cells = <0>;
};
pa_therm_bridge: pa-therm-bridge {
compatible = "generic-adc-thermal";
io-channels = <&pm4125_adc ADC5_AMUX_THM1_100K_PU>;
io-channel-names = "sensor-channel";
#thermal-sensor-cells = <0>;
};
quiet_therm_bridge: quiet-therm-bridge {
compatible = "generic-adc-thermal";
io-channels = <&pm4125_adc ADC5_AMUX_THM2_100K_PU>;
io-channel-names = "sensor-channel";
#thermal-sensor-cells = <0>;
};
thermal-zones {
sys-1-thermal {
polling-delay-passive = <2000>;
thermal-sensors = <&pa_therm_bridge>;
trips {
active-config0 {
temperature = <80000>;
hysteresis = <2000>;
type = "hot";
};
};
};
sys-2-thermal {
polling-delay-passive = <2000>;
thermal-sensors = <&quiet_therm_bridge>;
trips {
active-config0 {
temperature = <80000>;
hysteresis = <2000>;
type = "hot";
};
};
};
sys-3-thermal {
polling-delay-passive = <2000>;
thermal-sensors = <&msm_therm_bridge>;
trips {
active-config0 {
temperature = <80000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
wcn3988-pmu {
compatible = "qcom,wcn3988-pmu";
pinctrl-0 = <&sw_ctrl_default>;
pinctrl-names = "default";
swctrl-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
vddio-supply = <&pm4125_l7>;
vddxo-supply = <&pm4125_l13>;
vddrf-supply = <&pm4125_l10>;
vddch0-supply = <&pm4125_l22>;
regulators {
vreg_pmu_io: ldo0 {
regulator-name = "vreg_pmu_io";
};
vreg_pmu_xo: ldo1 {
regulator-name = "vreg_pmu_xo";
};
vreg_pmu_rf: ldo2 {
regulator-name = "vreg_pmu_rf";
};
vreg_pmu_ch0: ldo3 {
regulator-name = "vreg_pmu_ch0";
};
vreg_pmu_ch1: ldo4 {
regulator-name = "vreg_pmu_ch1";
};
};
};
};
&pm4125_adc {
pinctrl-0 = <&pm4125_adc_gpio5_default>, <&pm4125_adc_gpio6_default>;
pinctrl-names = "default";
channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "pa_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
label = "quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
label = "msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@54 {
reg = <ADC5_GPIO3_100K_PU>;
label = "chgr_skin";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@55 {
reg = <ADC5_GPIO4_100K_PU>;
label = "gnss_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm4125_gpios {
pm4125_adc_gpio5_default: pm4125-adc-gpio5-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
pm4125_adc_gpio6_default: pm4125-adc-gpio6-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
vol_up_n: vol-up-n-state {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-up;
power-source = <0>;
};
};
&pm4125_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8005_regulators {
status = "disabled";
};
&pm4125_typec {
status = "okay";
connector {
compatible = "usb-c-connector";
power-role = "dual";
data-role = "dual";
self-powered;
vbus-supply = <&pm4125_vbus>;
typec-power-opmode = "default";
pd-disable;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pm4125_hs_in: endpoint {
};
};
port@1 {
reg = <1>;
pm4125_ss_in: endpoint {
};
};
};
};
};
&pm4125_vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
status = "okay";
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm2250-regulators";
pm4125_s2: s2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
};
pm4125_l3: l3 {
regulator-min-microvolt = <624000>;
regulator-max-microvolt = <650000>;
};
pm4125_l4: l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
};
pm4125_l5: l5 {
regulator-min-microvolt = <1232000>;
regulator-max-microvolt = <1304000>;
};
pm4125_l6: l6 {
regulator-min-microvolt = <788000>;
regulator-max-microvolt = <1050000>;
};
pm4125_l7: l7 {
regulator-min-microvolt = <664000>;
regulator-max-microvolt = <664000>;
};
pm4125_l8: l8 {
regulator-min-microvolt = <928000>;
regulator-max-microvolt = <1000000>;
};
pm4125_l9: l9 {
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <1000000>;
};
pm4125_l10: l10 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
};
pm4125_l12: l12 {
regulator-min-microvolt = <928000>;
regulator-max-microvolt = <975000>;
};
pm4125_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm4125_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm4125_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm4125_l16: l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm4125_l17: l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
};
pm4125_l18: l18 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
};
pm4125_l19: l19 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
};
pm4125_l20: l20 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <2952000>;
};
pm4125_l21: l21 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3056000>;
};
pm4125_l22: l22 {
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
};
};
};
&tlmm {
gpio-reserved-ranges = <6 4>, /* Fingerprint SPI */
<30 2>, /* NFC SPI */
<138 1>, /* NFC Secure IO */
<155 11>; /* eMMC Boot */
sw_ctrl_default: sw-ctrl-default-state {
pins = "gpio88";
function = "gpio";
bias-pull-down;
};
};
&uart8 {
status = "okay";
bluetooth {
compatible = "qcom,wcn3988-bt";
max-speed = <3200000>;
vddio-supply = <&vreg_pmu_io>;
vddxo-supply = <&vreg_pmu_xo>;
vddrf-supply = <&vreg_pmu_rf>;
vddch0-supply = <&vreg_pmu_ch0>;
};
};
&wifi {
vdd-0.8-cx-mx-supply = <&pm4125_l7>;
vdd-1.8-xo-supply = <&vreg_pmu_xo>;
vdd-1.3-rfa-supply = <&vreg_pmu_rf>;
vdd-3.3-ch0-supply = <&vreg_pmu_ch0>;
qcom,calibration-variant = "Shikra_EVK";
firmware-name = "shikra";
status = "okay";
};