# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/ti,davinci-spi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DaVinci/Keystone SPI Controller
maintainers:
- Bartosz Golaszewski <brgl@kernel.org>
properties:
compatible:
oneOf:
- enum:
- ti,da830-spi
- ti,keystone-spi
- ti,dm6441-spi
- items:
- const: ti,keystone-spi
- const: ti,dm6441-spi
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
power-domains:
maxItems: 1
description:
Should contain a phandle to a PM domain provider node
and an args specifier containing the SPI device id
value.
num-cs:
minimum: 1
default: 1
description:
Number of chip selects supported by the controller. This
includes both internal and GPIO chip selects.
ti,davinci-spi-intr-line:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description:
Interrupt line used to connect the SPI IP to the interrupt
controller within the SoC. The SPI peripheral can route its
interrupt output to one of two lines (INT0 or INT1). Set
this based on the SoC-specific wiring to the interrupt
controller.
dmas:
items:
- description: RX DMA channel
- description: TX DMA channel
dma-names:
items:
- const: rx
- const: tx
"#address-cells":
const: 1
required:
- compatible
- reg
- interrupts
- clocks
- ti,davinci-spi-intr-line
- num-cs
- "#address-cells"
- "#size-cells"
allOf:
- $ref: spi-controller.yaml#
- if:
properties:
compatible:
items:
- const: ti,keystone-spi
then:
required:
- power-domains
unevaluatedProperties: false
examples:
- |
spi@20bf0000 {
compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x20bf0000 0x1000>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <338>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <25000000>;
reg = <0>;
ti,spi-wdelay = <8>;
};
};
- |
spi@41000 {
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
dmas = <&edma0 14 0>, <&edma0 15 0>;
dma-names = "rx", "tx";
clocks = <&psc0 4>;
power-domains = <&psc0 4>;
#address-cells = <1>;
#size-cells = <0>;
};