# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/hisilicon/hisilicon,hi6220-ade.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Hisilicon ADE Display Controller

maintainers:
  - Xinliang Liu <z.liuxinliang@hisilicon.com>

description:
  ADE (Advanced Display Engine) is the display controller which grab image
  data from memory, do composition, do post image processing, generate RGB
  timing stream and transfer to DSI.

properties:
  compatible:
    const: hisilicon,hi6220-ade

  reg:
    maxItems: 1

  reg-names:
    items:
      - const: ade_base

  clocks:
    maxItems: 3

  clock-names:
    items:
      - const: clk_ade_core
      - const: clk_codec_jpeg
      - const: clk_ade_pix

  dma-coherent: true

  interrupts:
    items:
      - description: LDI vblank interrupt specifier.

  resets:
    maxItems: 1

  hisilicon,noc-syscon:
    description: ADE NOC QoS syscon.
    $ref: /schemas/types.yaml#/definitions/phandle

  port:
    $ref: /schemas/graph.yaml#/properties/port
    description: Output port containing an endpoint subnode.

required:
  - compatible
  - reg
  - reg-names
  - clocks
  - clock-names
  - interrupts
  - resets
  - hisilicon,noc-syscon
  - port

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/hi6220-clock.h>
    #include <dt-bindings/reset/hisi,hi6220-resets.h>

    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        ade@f4100000 {
            compatible = "hisilicon,hi6220-ade";
            reg = <0x0 0xf4100000 0x0 0x7800>;
            reg-names = "ade_base";
            clocks = <&media_ctrl HI6220_ADE_CORE>,
                     <&media_ctrl HI6220_CODEC_JPEG>,
                     <&media_ctrl HI6220_ADE_PIX_SRC>;
            clock-names = "clk_ade_core", "clk_codec_jpeg", "clk_ade_pix";
            dma-coherent;
            interrupts = <0 115 4>;
            resets = <&media_ctrl MEDIA_ADE>;
            hisilicon,noc-syscon = <&medianoc_ade>;

            port {
                endpoint {
                    remote-endpoint = <&dsi_in>;
                };
            };
        };
    };