# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SM6350 SoC LPASS LPI TLMM

maintainers:
  - Luca Weiss <luca.weiss@fairphone.com>

description:
  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
  (LPASS) Low Power Island (LPI) of Qualcomm SM6350 SoC.

properties:
  compatible:
    const: qcom,sm6350-lpass-lpi-pinctrl

  reg:
    items:
      - description: LPASS LPI TLMM Control and Status registers
      - description: LPASS LPI MCC registers

  clocks:
    items:
      - description: LPASS Core voting clock
      - description: LPASS Audio voting clock

  clock-names:
    items:
      - const: core
      - const: audio

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-sm6350-lpass-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-sm6350-lpass-state"
        additionalProperties: false

$defs:
  qcom-sm6350-lpass-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
    unevaluatedProperties: false

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          pattern: "^gpio([0-9]|1[0-4])$"

      function:
        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
                dmic3_data, gpio, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
                i2s2_data, i2s2_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws,
                swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
                wsa_swr_data ]
        description:
          Specify the alternative function to be configured for the specified
          pins.

allOf:
  - $ref: qcom,lpass-lpi-common.yaml#

required:
  - compatible
  - reg
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>

    lpass_tlmm: pinctrl@33c0000 {
        compatible = "qcom,sm6350-lpass-lpi-pinctrl";
        reg = <0x033c0000 0x20000>,
              <0x03550000 0x10000>;
        gpio-controller;
        #gpio-cells = <2>;
        gpio-ranges = <&lpass_tlmm 0 0 15>;

        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
        clock-names = "core",
                      "audio";

        i2s1_active: i2s1-active-state {
            clk-pins {
                pins = "gpio6";
                function = "i2s1_clk";
                drive-strength = <8>;
                bias-disable;
                output-high;
            };

            ws-pins {
                pins = "gpio7";
                function = "i2s1_ws";
                drive-strength = <8>;
                bias-disable;
                output-high;
            };

            data-pins {
                pins = "gpio8", "gpio9";
                function = "i2s1_data";
                drive-strength = <8>;
                bias-disable;
                output-high;
            };
        };
    };