# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2022 StarFive Technology Co., Ltd. %YAML 1.2 --- $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: StarFive JH7110 DWMAC glue layer maintainers: - Emil Renner Berthing <kernel@esmil.dk> - Samin Guo <samin.guo@starfivetech.com> select: properties: compatible: contains: enum: - starfive,jh7110-dwmac required: - compatible properties: compatible: items: - enum: - starfive,jh7110-dwmac - const: snps,dwmac-5.20 reg: maxItems: 1 clocks: items: - description: GMAC main clock - description: GMAC AHB clock - description: PTP clock - description: TX clock - description: GTX clock clock-names: items: - const: stmmaceth - const: pclk - const: ptp_ref - const: tx - const: gtx interrupts: minItems: 3 maxItems: 3 interrupt-names: minItems: 3 maxItems: 3 resets: items: - description: MAC Reset signal. - description: AHB Reset signal. reset-names: items: - const: stmmaceth - const: ahb starfive,tx-use-rgmii-clk: description: Tx clock is provided by external rgmii clock. type: boolean starfive,syscon: $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to syscon that configures phy mode - description: Offset of phy mode selection - description: Shift of phy mode selection description: A phandle to syscon with two arguments that configure phy mode. The argument one is the offset of phy mode selection, the argument two is the shift of phy mode selection. required: - compatible - reg - clocks - clock-names - interrupts - interrupt-names - resets - reset-names allOf: - $ref: snps,dwmac.yaml# unevaluatedProperties: false examples: - | ethernet@16030000 { compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; reg = <0x16030000 0x10000>; clocks = <&clk 3>, <&clk 2>, <&clk 109>, <&clk 6>, <&clk 111>; clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx"; resets = <&rst 1>, <&rst 2>; reset-names = "stmmaceth", "ahb"; interrupts = <7>, <6>, <5>; interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; phy-mode = "rgmii-id"; snps,multicast-filter-bins = <64>; snps,perfect-filter-entries = <8>; rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,fixed-burst; snps,no-pbl-x8; snps,tso; snps,force_thresh_dma_mode; snps,axi-config = <&stmmac_axi_setup>; snps,en-tx-lpi-clockgating; snps,txpbl = <16>; snps,rxpbl = <16>; starfive,syscon = <&aon_syscon 0xc 0x12>; phy-handle = <&phy0>; mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy0: ethernet-phy@0 { reg = <0>; }; }; stmmac_axi_setup: stmmac-axi-config { snps,lpi_en; snps,wr_osr_lmt = <4>; snps,rd_osr_lmt = <4>; snps,blen = <256 128 64 32 0 0 0>; }; };