# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale MXS GPIO controller

maintainers:
  - Shawn Guo <shawnguo@kernel.org>
  - Anson Huang <Anson.Huang@nxp.com>

description: |
  The Freescale MXS GPIO controller is part of MXS PIN controller.
  The GPIOs are organized in port/bank, each port consists of 32 GPIOs.
  As the GPIO controller is embedded in the PIN controller and all the
  GPIO ports share the same IO space with PIN controller, the GPIO node
  will be represented as sub-nodes of MXS pinctrl node.

properties:
  compatible:
    enum:
      - fsl,imx23-pinctrl
      - fsl,imx28-pinctrl

  '#address-cells':
    const: 1
  '#size-cells':
    const: 0

  reg:
    maxItems: 1

patternProperties:
  "gpio@[0-9]+$":
    type: object
    properties:
      compatible:
        enum:
          - fsl,imx23-gpio
          - fsl,imx28-gpio

      reg:
        maxItems: 1

      interrupts:
        description: Should be the port interrupt shared by all 32 pins.
        maxItems: 1

      interrupt-controller: true

      "#interrupt-cells":
        const: 2

      "#gpio-cells":
        const: 2

      gpio-controller: true

    required:
      - compatible
      - reg
      - interrupts
      - interrupt-controller
      - "#interrupt-cells"
      - "#gpio-cells"
      - gpio-controller

    additionalProperties: false

required:
  - compatible
  - reg
  - '#address-cells'
  - '#size-cells'

additionalProperties: false

examples:
  - |
    pinctrl@80018000 {
        #address-cells = <1>;
        #size-cells = <0>;
        compatible = "fsl,imx28-pinctrl";
        reg = <0x80018000 0x2000>;

        gpio@0 {
                compatible = "fsl,imx28-gpio";
                reg = <0>;
                interrupts = <127>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };

        gpio@1 {
                compatible = "fsl,imx28-gpio";
                reg = <1>;
                interrupts = <126>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };

        gpio@2 {
                compatible = "fsl,imx28-gpio";
                reg = <2>;
                interrupts = <125>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };

        gpio@3 {
                compatible = "fsl,imx28-gpio";
                reg = <3>;
                interrupts = <124>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };

        gpio@4 {
                compatible = "fsl,imx28-gpio";
                reg = <4>;
                interrupts = <123>;
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-controller;
                #interrupt-cells = <2>;
        };
    };