# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/leds/leds-lgm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel Lightning Mountain (LGM) SoC LED Serial Shift Output (SSO) Controller driver maintainers: - Zhu, Yi Xin <Yixin.zhu@intel.com> - Amireddy Mallikarjuna reddy <mallikarjunax.reddy@intel.com> properties: compatible: const: intel,lgm-ssoled reg: maxItems: 1 clocks: maxItems: 2 clock-names: items: - const: sso - const: fpid gpio-controller: true '#gpio-cells': const: 2 ngpios: minimum: 0 maximum: 32 description: Number of GPIOs this controller provides. intel,sso-update-rate-hz: description: Blink frequency for SOUTs in Hz. led-controller: type: object description: This sub-node must contain a sub-node for each leds. additionalProperties: false properties: '#address-cells': const: 1 '#size-cells': const: 0 patternProperties: "^led@[0-2]$": $ref: common.yaml# unevaluatedProperties: false properties: reg: description: Index of the LED. minimum: 0 maximum: 2 led-gpios: maxItems: 1 intel,sso-hw-trigger: type: boolean description: This property indicates Hardware driven/control LED. intel,sso-hw-blink: type: boolean description: This property indicates Enable LED blink by Hardware. intel,sso-blink-rate-hz: description: LED HW blink frequency. retain-state-suspended: type: boolean description: The suspend state of LED can be retained. retain-state-shutdown: type: boolean description: Retain the state of the LED on shutdown. required: - compatible - reg - clocks - clock-names - "#gpio-cells" - gpio-controller additionalProperties: false examples: - | #include <dt-bindings/clock/intel,lgm-clk.h> #include <dt-bindings/leds/common.h> ssogpio: ssogpio@e0d40000 { compatible = "intel,lgm-ssoled"; reg = <0xE0D40000 0x2E4>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ledc>; clocks = <&cgu0 LGM_GCLK_LEDC0>, <&afeclk>; clock-names = "sso", "fpid"; intel,sso-update-rate-hz = <250000>; led-controller { #address-cells = <1>; #size-cells = <0>; led@0 { reg = <0>; function = "gphy"; color = <LED_COLOR_ID_GREEN>; led-gpios = <&ssogpio 0 0>; }; led@2 { reg = <2>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; led-gpios = <&ssogpio 23 0>; }; }; };