// SPDX-License-Identifier: (GPL-2.0+ or MIT) // Copyright (C) 2022 Samuel Holland <samuel@sholland.org> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> /dts-v1/; #include "sun20i-d1.dtsi" #include "sun20i-common-regulators.dtsi" / { model = "MangoPi MQ Pro"; compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1"; aliases { ethernet0 = &rtl8723ds; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; leds { compatible = "gpio-leds"; led-0 { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; }; reg_avdd2v8: avdd2v8 { compatible = "regulator-fixed"; regulator-name = "avdd2v8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; vin-supply = <®_vcc_3v3>; }; reg_dvdd: dvdd { compatible = "regulator-fixed"; regulator-name = "dvdd"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; vin-supply = <®_vcc_3v3>; }; reg_vdd_cpu: vdd-cpu { compatible = "regulator-fixed"; regulator-name = "vdd-cpu"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; vin-supply = <®_vcc>; }; wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */ }; }; &cpu0 { cpu-supply = <®_vdd_cpu>; }; &dcxo { clock-frequency = <24000000>; }; &ehci1 { status = "okay"; }; &mmc0 { bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ disable-wp; vmmc-supply = <®_vcc_3v3>; vqmmc-supply = <®_vcc_3v3>; pinctrl-0 = <&mmc0_pins>; pinctrl-names = "default"; status = "okay"; }; &mmc1 { bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; vmmc-supply = <®_vcc_3v3>; vqmmc-supply = <®_vcc_3v3>; pinctrl-0 = <&mmc1_pins>; pinctrl-names = "default"; status = "okay"; rtl8723ds: wifi@1 { reg = <1>; interrupt-parent = <&pio>; interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */ interrupt-names = "host-wake"; }; }; &ohci1 { status = "okay"; }; &pio { vcc-pe-supply = <®_avdd2v8>; }; &uart0 { pinctrl-0 = <&uart0_pb8_pins>; pinctrl-names = "default"; status = "okay"; }; &uart1 { uart-has-rtscts; pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; pinctrl-names = "default"; status = "okay"; bluetooth { compatible = "realtek,rtl8723ds-bt"; device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */ enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */ host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ }; }; &usb_otg { dr_mode = "peripheral"; status = "okay"; }; &usbphy { usb1_vbus-supply = <®_vcc>; status = "okay"; };