// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, Linaro Limited
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
CPU0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
clocks = <&apcs_glb>;
operating-points-v2 = <&cpu_opp_table>;
power-domains = <&cpr>;
power-domain-names = "cpr";
};
CPU1: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
clocks = <&apcs_glb>;
operating-points-v2 = <&cpu_opp_table>;
power-domains = <&cpr>;
power-domain-names = "cpr";
};
CPU2: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
clocks = <&apcs_glb>;
operating-points-v2 = <&cpu_opp_table>;
power-domains = <&cpr>;
power-domain-names = "cpr";
};
CPU3: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
clocks = <&apcs_glb>;
operating-points-v2 = <&cpu_opp_table>;
power-domains = <&cpr>;
power-domain-names = "cpr";
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
idle-states {
entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
idle-state-name = "standalone-power-collapse";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <125>;
exit-latency-us = <180>;
min-residency-us = <595>;
local-timer-stop;
};
};
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2-kryo-cpu";
opp-shared;
opp-1094400000 {
opp-hz = /bits/ 64 <1094400000>;
required-opps = <&cpr_opp1>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
required-opps = <&cpr_opp2>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
required-opps = <&cpr_opp3>;
};
};
cpr_opp_table: opp-table-cpr {
compatible = "operating-points-v2-qcom-level";
cpr_opp1: opp1 {
opp-level = <1>;
qcom,opp-fuse-level = <1>;
};
cpr_opp2: opp2 {
opp-level = <2>;
qcom,opp-fuse-level = <2>;
};
cpr_opp3: opp3 {
opp-level = <3>;
qcom,opp-fuse-level = <3>;
};
};
firmware {
scm: scm {
compatible = "qcom,scm-qcs404", "qcom,scm";
#reset-cells = <1>;
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-qcs404";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,qcs404-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <16>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <32>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <48>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <64>;
};
rpmpd_opp_svs: opp5 {
opp-level = <128>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <192>;
};
rpmpd_opp_nom: opp7 {
opp-level = <256>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <320>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <384>;
};
rpmpd_opp_turbo_no_cpr: opp10 {
opp-level = <416>;
};
rpmpd_opp_turbo_plus: opp11 {
opp-level = <512>;
};
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tz_apps_mem: memory@85900000 {
reg = <0 0x85900000 0 0x500000>;
no-map;
};
xbl_mem: memory@85e00000 {
reg = <0 0x85e00000 0 0x100000>;
no-map;
};
smem_region: memory@85f00000 {
reg = <0 0x85f00000 0 0x200000>;
no-map;
};
tz_mem: memory@86100000 {
reg = <0 0x86100000 0 0x300000>;
no-map;
};
wlan_fw_mem: memory@86400000 {
reg = <0 0x86400000 0 0x1100000>;
no-map;
};
adsp_fw_mem: memory@87500000 {
reg = <0 0x87500000 0 0x1a00000>;
no-map;
};
cdsp_fw_mem: memory@88f00000 {
reg = <0 0x88f00000 0 0x600000>;
no-map;
};
wlan_msa_mem: memory@89500000 {
reg = <0 0x89500000 0 0x100000>;
no-map;
};
uefi_mem: memory@9f800000 {
reg = <0 0x9f800000 0 0x800000>;
no-map;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
turingcc: clock-controller@800000 {
compatible = "qcom,qcs404-turingcc";
reg = <0x00800000 0x30000>;
clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
#clock-cells = <1>;
#reset-cells = <1>;
status = "disabled";
};
rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x6000>;
};
usb3_phy: phy@78000 {
compatible = "qcom,usb-ss-28nm-phy";
reg = <0x00078000 0x400>;
#phy-cells = <0>;
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "ref", "ahb", "pipe";
resets = <&gcc GCC_USB3_PHY_BCR>,
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "com", "phy";
status = "disabled";
};
usb2_phy_prim: phy@7a000 {
compatible = "qcom,usb-hs-28nm-femtophy";
reg = <0x0007a000 0x200>;
#phy-cells = <0>;
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "ahb", "sleep";
resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
<&gcc GCC_USB2A_PHY_BCR>;
reset-names = "phy", "por";
status = "disabled";
};
usb2_phy_sec: phy@7c000 {
compatible = "qcom,usb-hs-28nm-femtophy";
reg = <0x0007c000 0x200>;
#phy-cells = <0>;
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "ahb", "sleep";
resets = <&gcc GCC_QUSB2_PHY_BCR>,
<&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
reset-names = "phy", "por";
status = "disabled";
};
qfprom: qfprom@a4000 {
compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
cpr_efuse_speedbin: speedbin@13c {
reg = <0x13c 0x4>;
bits = <2 3>;
};
tsens_s0_p1: s0-p1@1f8 {
reg = <0x1f8 0x1>;
bits = <0 6>;
};
tsens_s0_p2: s0-p2@1f8 {
reg = <0x1f8 0x2>;
bits = <6 6>;
};
tsens_s1_p1: s1-p1@1f9 {
reg = <0x1f9 0x2>;
bits = <4 6>;
};
tsens_s1_p2: s1-p2@1fa {
reg = <0x1fa 0x1>;
bits = <2 6>;
};
tsens_s2_p1: s2-p1@1fb {
reg = <0x1fb 0x1>;
bits = <0 6>;
};
tsens_s2_p2: s2-p2@1fb {
reg = <0x1fb 0x2>;
bits = <6 6>;
};
tsens_s3_p1: s3-p1@1fc {
reg = <0x1fc 0x2>;
bits = <4 6>;
};
tsens_s3_p2: s3-p2@1fd {
reg = <0x1fd 0x1>;
bits = <2 6>;
};
tsens_s4_p1: s4-p1@1fe {
reg = <0x1fe 0x1>;
bits = <0 6>;
};
tsens_s4_p2: s4-p2@1fe {
reg = <0x1fe 0x2>;
bits = <6 6>;
};
tsens_s5_p1: s5-p1@200 {
reg = <0x200 0x1>;
bits = <0 6>;
};
tsens_s5_p2: s5-p2@200 {
reg = <0x200 0x2>;
bits = <6 6>;
};
tsens_s6_p1: s6-p1@201 {
reg = <0x201 0x2>;
bits = <4 6>;
};
tsens_s6_p2: s6-p2@202 {
reg = <0x202 0x1>;
bits = <2 6>;
};
tsens_s7_p1: s7-p1@203 {
reg = <0x203 0x1>;
bits = <0 6>;
};
tsens_s7_p2: s7-p2@203 {
reg = <0x203 0x2>;
bits = <6 6>;
};
tsens_s8_p1: s8-p1@204 {
reg = <0x204 0x2>;
bits = <4 6>;
};
tsens_s8_p2: s8-p2@205 {
reg = <0x205 0x1>;
bits = <2 6>;
};
tsens_s9_p1: s9-p1@206 {
reg = <0x206 0x1>;
bits = <0 6>;
};
tsens_s9_p2: s9-p2@206 {
reg = <0x206 0x2>;
bits = <6 6>;
};
tsens_mode: mode@208 {
reg = <0x208 1>;
bits = <0 3>;
};
tsens_base1: base1@208 {
reg = <0x208 2>;
bits = <3 8>;
};
tsens_base2: base2@208 {
reg = <0x209 2>;
bits = <3 8>;
};
cpr_efuse_quot_offset1: qoffset1@231 {
reg = <0x231 0x4>;
bits = <4 7>;
};
cpr_efuse_quot_offset2: qoffset2@232 {
reg = <0x232 0x4>;
bits = <3 7>;
};
cpr_efuse_quot_offset3: qoffset3@233 {
reg = <0x233 0x4>;
bits = <2 7>;
};
cpr_efuse_init_voltage1: ivoltage1@229 {
reg = <0x229 0x4>;
bits = <4 6>;
};
cpr_efuse_init_voltage2: ivoltage2@22a {
reg = <0x22a 0x4>;
bits = <2 6>;
};
cpr_efuse_init_voltage3: ivoltage3@22b {
reg = <0x22b 0x4>;
bits = <0 6>;
};
cpr_efuse_quot1: quot1@22b {
reg = <0x22b 0x4>;
bits = <6 12>;
};
cpr_efuse_quot2: quot2@22d {
reg = <0x22d 0x4>;
bits = <2 12>;
};
cpr_efuse_quot3: quot3@230 {
reg = <0x230 0x4>;
bits = <0 12>;
};
cpr_efuse_ring1: ring1@228 {
reg = <0x228 0x4>;
bits = <0 3>;
};
cpr_efuse_ring2: ring2@228 {
reg = <0x228 0x4>;
bits = <4 3>;
};
cpr_efuse_ring3: ring3@229 {
reg = <0x229 0x4>;
bits = <0 3>;
};
cpr_efuse_revision: revision@218 {
reg = <0x218 0x4>;
bits = <3 3>;
};
};
rng: rng@e3000 {
compatible = "qcom,prng-ee";
reg = <0x000e3000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
bimc: interconnect@400000 {
reg = <0x00400000 0x80000>;
compatible = "qcom,qcs404-bimc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
<&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens: thermal-sensor@4a9000 {
compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
reg = <0x004a9000 0x1000>, /* TM */
<0x004a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_mode>,
<&tsens_base1>, <&tsens_base2>,
<&tsens_s0_p1>, <&tsens_s0_p2>,
<&tsens_s1_p1>, <&tsens_s1_p2>,
<&tsens_s2_p1>, <&tsens_s2_p2>,
<&tsens_s3_p1>, <&tsens_s3_p2>,
<&tsens_s4_p1>, <&tsens_s4_p2>,
<&tsens_s5_p1>, <&tsens_s5_p2>,
<&tsens_s6_p1>, <&tsens_s6_p2>,
<&tsens_s7_p1>, <&tsens_s7_p2>,
<&tsens_s8_p1>, <&tsens_s8_p2>,
<&tsens_s9_p1>, <&tsens_s9_p2>;
nvmem-cell-names = "mode",
"base1", "base2",
"s0_p1", "s0_p2",
"s1_p1", "s1_p2",
"s2_p1", "s2_p2",
"s3_p1", "s3_p2",
"s4_p1", "s4_p2",
"s5_p1", "s5_p2",
"s6_p1", "s6_p2",
"s7_p1", "s7_p2",
"s8_p1", "s8_p2",
"s9_p1", "s9_p2";
#qcom,sensors = <10>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
pcnoc: interconnect@500000 {
reg = <0x00500000 0x15080>;
compatible = "qcom,qcs404-pcnoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
<&rpmcc RPM_SMD_PNOC_A_CLK>;
};
snoc: interconnect@580000 {
reg = <0x00580000 0x23080>;
compatible = "qcom,qcs404-snoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
remoteproc_cdsp: remoteproc@b00000 {
compatible = "qcom,qcs404-cdsp-pas";
reg = <0x00b00000 0x4040>;
interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&xo_board>;
clock-names = "xo";
/*
* If the node was using the PIL binding, then include properties:
* clocks = <&xo_board>,
* <&gcc GCC_CDSP_CFG_AHB_CLK>,
* <&gcc GCC_CDSP_TBU_CLK>,
* <&gcc GCC_BIMC_CDSP_CLK>,
* <&turingcc TURING_WRAPPER_AON_CLK>,
* <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
* <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
* <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
* clock-names = "xo",
* "sway",
* "tbu",
* "bimc",
* "ahb_aon",
* "q6ss_slave",
* "q6ss_master",
* "q6_axim";
* resets = <&gcc GCC_CDSP_RESTART>;
* reset-names = "restart";
* qcom,halt-regs = <&tcsr 0x19004>;
*/
memory-region = <&cdsp_fw_mem>;
qcom,smem-states = <&cdsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
qcom,remote-pid = <5>;
mboxes = <&apcs_glb 12>;
label = "cdsp";
};
};
usb3: usb@7678800 {
compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
reg = <0x07678800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB3_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "core", "iface", "sleep", "mock_utmi";
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
usb3_dwc3: usb@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy_prim>, <&usb3_phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
dr_mode = "otg";
};
};
usb2: usb@79b8800 {
compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
reg = <0x079b8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
<&gcc GCC_PCNOC_USB2_CLK>,
<&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
<&gcc GCC_USB20_MOCK_UTMI_CLK>;
clock-names = "core", "iface", "sleep", "mock_utmi";
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
usb@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy_sec>;
phy-names = "usb2-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
dr_mode = "peripheral";
};
};
tlmm: pinctrl@1000000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x01000000 0x200000>,
<0x01300000 0x200000>,
<0x07b00000 0x200000>;
reg-names = "south", "north", "east";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&tlmm 0 0 120>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_i2c0_default: blsp1-i2c0-default-state {
pins = "gpio32", "gpio33";
function = "blsp_i2c0";
};
blsp1_i2c1_default: blsp1-i2c1-default-state {
pins = "gpio24", "gpio25";
function = "blsp_i2c1";
};
blsp1_i2c2_default: blsp1-i2c2-default-state {
sda-pins {
pins = "gpio19";
function = "blsp_i2c_sda_a2";
};
scl-pins {
pins = "gpio20";
function = "blsp_i2c_scl_a2";
};
};
blsp1_i2c3_default: blsp1-i2c3-default-state {
pins = "gpio84", "gpio85";
function = "blsp_i2c3";
};
blsp1_i2c4_default: blsp1-i2c4-default-state {
pins = "gpio117", "gpio118";
function = "blsp_i2c4";
};
blsp1_uart0_default: blsp1-uart0-default-state {
pins = "gpio30", "gpio31", "gpio32", "gpio33";
function = "blsp_uart0";
};
blsp1_uart1_default: blsp1-uart1-default-state {
pins = "gpio22", "gpio23";
function = "blsp_uart1";
};
blsp1_uart2_default: blsp1-uart2-default-state {
rx-pins {
pins = "gpio18";
function = "blsp_uart_rx_a2";
};
tx-pins {
pins = "gpio17";
function = "blsp_uart_tx_a2";
};
};
blsp1_uart3_default: blsp1-uart3-default-state {
cts-pins {
pins = "gpio84";
function = "blsp_uart3";
};
rts-tx-pins {
pins = "gpio85", "gpio82";
function = "blsp_uart3";
};
rx-pins {
pins = "gpio83";
function = "blsp_uart3";
};
};
blsp2_i2c0_default: blsp2-i2c0-default-state {
pins = "gpio28", "gpio29";
function = "blsp_i2c5";
};
blsp1_spi0_default: blsp1-spi0-default-state {
pins = "gpio30", "gpio31", "gpio32", "gpio33";
function = "blsp_spi0";
};
blsp1_spi1_default: blsp1-spi1-default-state {
mosi-pins {
pins = "gpio22";
function = "blsp_spi_mosi_a1";
};
miso-pins {
pins = "gpio23";
function = "blsp_spi_miso_a1";
};
cs-n-pins {
pins = "gpio24";
function = "blsp_spi_cs_n_a1";
};
clk-pins {
pins = "gpio25";
function = "blsp_spi_clk_a1";
};
};
blsp1_spi2_default: blsp1-spi2-default-state {
pins = "gpio17", "gpio18", "gpio19", "gpio20";
function = "blsp_spi2";
};
blsp1_spi3_default: blsp1-spi3-default-state {
pins = "gpio82", "gpio83", "gpio84", "gpio85";
function = "blsp_spi3";
};
blsp1_spi4_default: blsp1-spi4-default-state {
pins = "gpio37", "gpio38", "gpio117", "gpio118";
function = "blsp_spi4";
};
blsp2_spi0_default: blsp2-spi0-default-state {
pins = "gpio26", "gpio27", "gpio28", "gpio29";
function = "blsp_spi5";
};
blsp2_uart0_default: blsp2-uart0-default-state {
pins = "gpio26", "gpio27", "gpio28", "gpio29";
function = "blsp_uart5";
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-qcs404";
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&xo_board>,
<&sleep_clk>,
<&pcie_phy>,
<0>,
<0>,
<0>;
assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
assigned-clock-rates = <19200000>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,qcs404-tcsr", "syscon";
reg = <0x01937000 0x25000>;
};
sram@290000 {
compatible = "qcom,rpm-stats";
reg = <0x00290000 0x10000>;
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
<0x02400000 0x800000>,
<0x02c00000 0x800000>,
<0x03800000 0x200000>,
<0x0200a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
remoteproc_wcss: remoteproc@7400000 {
compatible = "qcom,qcs404-wcss-pas";
reg = <0x07400000 0x4040>;
interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
<&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&xo_board>;
clock-names = "xo";
memory-region = <&wlan_fw_mem>;
qcom,smem-states = <&wcss_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,remote-pid = <1>;
mboxes = <&apcs_glb 16>;
label = "wcss";
};
};
pcie_phy: phy@7786000 {
compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
reg = <0x07786000 0xb8>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
<&gcc GCC_PCIE_0_PIPE_ARES>;
reset-names = "phy", "pipe";
clock-output-names = "pcie_0_pipe_clk";
#clock-cells = <0>;
#phy-cells = <0>;
status = "disabled";
};
sdcc1: mmc@7804000 {
compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
reg-names = "hc", "cqhci";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
status = "disabled";
};
blsp1_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x25000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "okay";
};
blsp1_uart0: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart0_default>;
status = "disabled";
};
blsp1_uart1: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart1_default>;
status = "disabled";
};
blsp1_uart2: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_default>;
status = "okay";
};
ethernet: ethernet@7a80000 {
compatible = "qcom,qcs404-ethqos";
reg = <0x07a80000 0x10000>,
<0x07a96000 0x100>;
reg-names = "stmmaceth", "rgmii";
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
clocks = <&gcc GCC_ETH_AXI_CLK>,
<&gcc GCC_ETH_SLAVE_AHB_CLK>,
<&gcc GCC_ETH_PTP_CLK>,
<&gcc GCC_ETH_RGMII_CLK>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
snps,tso;
rx-fifo-depth = <4096>;
tx-fifo-depth = <4096>;
status = "disabled";
};
wifi: wifi@a000000 {
compatible = "qcom,wcn3990-wifi";
reg = <0xa000000 0x800000>;
reg-names = "membase";
memory-region = <&wlan_msa_mem>;
interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
blsp1_uart3: serial@78b2000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b2000 0x200>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart3_default>;
status = "disabled";
};
blsp1_i2c0: i2c@78b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c0_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_spi0: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi0_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_i2c1: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c1_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_spi1: spi@78b6000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi1_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_i2c2: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c2_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_spi2: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi2_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_i2c3: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c3_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_spi3: spi@78b8000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi3_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_i2c4: i2c@78b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b9000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c4_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_spi4: spi@78b9000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b9000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi4_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_dma: dma-controller@7ac4000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07ac4000 0x17000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
};
blsp2_uart0: serial@7aef000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x07aef000 0x200>;
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart0_default>;
status = "disabled";
};
blsp2_i2c0: i2c@7af5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_i2c0_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_spi0: spi@7af5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi0_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sram@8600000 {
compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
reg = <0x08600000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x08600000 0x1000>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
<0x0b002000 0x1000>;
};
apcs_glb: mailbox@b011000 {
compatible = "qcom,qcs404-apcs-apps-global",
"qcom,msm8916-apcs-kpss-global", "syscon";
reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
clock-names = "pll", "aux";
#clock-cells = <0>;
};
apcs_hfpll: clock-controller@b016000 {
compatible = "qcom,hfpll";
reg = <0x0b016000 0x30>;
#clock-cells = <0>;
clock-output-names = "apcs_hfpll";
clocks = <&xo_board>;
clock-names = "xo";
};
watchdog@b017000 {
compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
reg = <0x0b017000 0x1000>;
clocks = <&sleep_clk>;
};
cpr: power-controller@b018000 {
compatible = "qcom,qcs404-cpr", "qcom,cpr";
reg = <0x0b018000 0x1000>;
interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
clocks = <&xo_board>;
clock-names = "ref";
vdd-apc-supply = <&pms405_s3>;
#power-domain-cells = <0>;
operating-points-v2 = <&cpr_opp_table>;
acc-syscon = <&tcsr>;
nvmem-cells = <&cpr_efuse_quot_offset1>,
<&cpr_efuse_quot_offset2>,
<&cpr_efuse_quot_offset3>,
<&cpr_efuse_init_voltage1>,
<&cpr_efuse_init_voltage2>,
<&cpr_efuse_init_voltage3>,
<&cpr_efuse_quot1>,
<&cpr_efuse_quot2>,
<&cpr_efuse_quot3>,
<&cpr_efuse_ring1>,
<&cpr_efuse_ring2>,
<&cpr_efuse_ring3>,
<&cpr_efuse_revision>;
nvmem-cell-names = "cpr_quotient_offset1",
"cpr_quotient_offset2",
"cpr_quotient_offset3",
"cpr_init_voltage1",
"cpr_init_voltage2",
"cpr_init_voltage3",
"cpr_quotient1",
"cpr_quotient2",
"cpr_quotient3",
"cpr_ring_osc1",
"cpr_ring_osc2",
"cpr_ring_osc3",
"cpr_fuse_revision";
};
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
clock-frequency = <19200000>;
frame@b121000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
remoteproc_adsp: remoteproc@c700000 {
compatible = "qcom,qcs404-adsp-pas";
reg = <0x0c700000 0x4040>;
interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&xo_board>;
clock-names = "xo";
memory-region = <&adsp_fw_mem>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
qcom,remote-pid = <2>;
mboxes = <&apcs_glb 8>;
label = "adsp";
};
};
pcie: pci@10000000 {
compatible = "qcom,pcie-qcs404";
reg = <0x10000000 0xf1d>,
<0x10000f20 0xa8>,
<0x07780000 0x2000>,
<0x10001000 0x2000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
<0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
clock-names = "iface", "aux", "master_bus", "slave_bus";
resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
<&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE_0_BCR>,
<&gcc GCC_PCIE_0_AHB_ARES>;
reset-names = "axi_m",
"axi_s",
"axi_m_sticky",
"pipe_sticky",
"pwr",
"ahb";
phys = <&pcie_phy>;
phy-names = "pciephy";
status = "disabled";
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 0xff08>,
<GIC_PPI 3 0xff08>,
<GIC_PPI 4 0xff08>,
<GIC_PPI 1 0xff08>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
cdsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
cdsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-wcss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 18>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
wcss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
wcss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
thermal-zones {
aoss-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 0>;
trips {
aoss_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 1>;
trips {
q6_hvx_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
};
};
};
lpass-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
trips {
lpass_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
wlan_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
};
};
};
cluster-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
cluster_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cluster_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
cluster_crit: cluster-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cluster_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu0_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu0_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
trips {
cpu1_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu1_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
cpu2_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu2_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
cpu3_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu3_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 9>;
trips {
gpu_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
};