// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8350.dtsi"
#include "pm8350.dtsi"
#include "pm8350b.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
#include "pmr735a.dtsi"
#include "pmr735b.dtsi"
/ {
/*
* Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
* Adding it will cause the bootloader to go crazy and randomly crash
* shortly after closing UEFI boot services.. Perhaps that has something
* to do with the OS running inside a VM now..?
*/
chassis-type = "handset";
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer: framebuffer@e1000000 {
compatible = "simple-framebuffer";
reg = <0 0xe1000000 0 0x2300000>;
/* The display, even though it's 4K, initializes at 1080-ish p */
width = <1096>;
height = <2560>;
stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's (going to be) a lot of clocks, but it's necessary due
* to unused clk cleanup & no panel driver yet
*/
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
key-camera-focus {
label = "Camera Focus";
linux,code = <KEY_CAMERA_FOCUS>;
gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-camera-snapshot {
label = "Camera Snapshot";
linux,code = <KEY_CAMERA>;
gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-google-assist {
label = "Google Assistant Key";
gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFTMETA>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
reserved-memory {
cont_splash_mem: memory@e1000000 {
reg = <0 0xe1000000 0 0x2300000>;
no-map;
};
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0 0xffc00000 0 0x100000>;
console-size = <0x40000>;
record-size = <0x1000>;
no-map;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&adsp {
status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "b";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-s11-supply = <&vph_pwr>;
vdd-s12-supply = <&vph_pwr>;
vdd-l1-l4-supply = <&pm8350_s11>;
vdd-l2-l7-supply = <&vreg_bob>;
vdd-l3-l5-supply = <&vreg_bob>;
vdd-l6-l9-l10-supply = <&pm8350_s11>;
/*
* ARC regulators:
* S5 - mx.lvl
* S6 - gfx.lvl
* S9 - mxc.lvl
*/
pm8350_s10: smps10 {
regulator-name = "pm8350_s10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350_s11: smps11 {
regulator-name = "pm8350_s11";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350_s12: smps12 {
regulator-name = "pm8350_s12";
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1360000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350_l1: ldo1 {
regulator-name = "pm8350_l1";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350_l2: ldo2 {
regulator-name = "pm8350_l2";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350_l3: ldo3 {
regulator-name = "pm8350_l3";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L4 - lmx.lvl (ARC) */
pm8350_l5: ldo5 {
regulator-name = "pm8350_l5";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
pm8350_l6: ldo6 {
regulator-name = "pm8350_l6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
pm8350_l7: ldo7 {
regulator-name = "pm8350_l7";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
/* L8 - lcx.lvl (ARC) */
pm8350_l9: ldo9 {
regulator-name = "pm8350_l9";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l12-supply = <&pm8350c_s1>;
vdd-l2-l8-supply = <&pm8350c_s1>;
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
vdd-l6-l9-l11-supply = <&vreg_bob>;
vdd-l10-supply = <&pm8350_s12>;
vdd-bob-supply = <&vph_pwr>;
pm8350c_s1: smps1 {
regulator-name = "pm8350c_s1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* S2 - ebi.lvl (ARC) */
pm8350c_s3: smps3 {
regulator-name = "pm8350c_s3";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/*
* ARC regulators:
* S4 - mss.lvl
* S6 - cx.lvl
* S8 - mmcx.lvl
*/
pm8350c_s10: smps10 {
regulator-name = "pm8350c_s10";
regulator-min-microvolt = <1048000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l1: ldo1 {
regulator-name = "pm8350c_l1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l2: ldo2 {
regulator-name = "pm8350c_l2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l3: ldo3 {
regulator-name = "pm8350c_l3";
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l4: ldo4 {
regulator-name = "pm8350c_l4";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l5: ldo5 {
regulator-name = "pm8350c_l5";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l6: ldo6 {
regulator-name = "pm8350c_l6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l7: ldo7 {
regulator-name = "pm8350c_l7";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l8: ldo8 {
regulator-name = "pm8350c_l8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l9: ldo9 {
regulator-name = "pm8350c_l9";
regulator-min-microvolt = <2960000>;
/* Originally max = 3008000 but SDHCI expects 2960000 */
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l10: ldo10 {
regulator-name = "pm8350c_l10";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l11: ldo11 {
regulator-name = "pm8350c_l11";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l12: ldo12 {
regulator-name = "pm8350c_l12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8350c_l13: ldo13 {
regulator-name = "pm8350c_l13";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
};
/* TODO: Add pm8350b (just one ldo) once the driver part is in */
regulators-2 {
compatible = "qcom,pmr735a-rpmh-regulators";
qcom,pmic-id = "e";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-l1-l2-supply = <&pmr735a_s2>;
vdd-l3-supply = <&pmr735a_s1>;
vdd-l4-supply = <&pm8350c_s1>;
vdd-l5-l6-supply = <&pm8350c_s1>;
vdd-l7-bob-supply = <&vreg_bob>;
pmr735a_s1: smps1 {
regulator-name = "pmr735a_s1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1280000>;
};
pmr735a_s2: smps2 {
regulator-name = "pmr735a_s2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <976000>;
};
pmr735a_s3: smps3 {
regulator-name = "pmr735a_s3";
regulator-min-microvolt = <2208000>;
regulator-max-microvolt = <2352000>;
};
pmr735a_l1: ldo1 {
regulator-name = "pmr735a_l1";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
};
pmr735a_l2: ldo2 {
regulator-name = "pmr735a_l2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pmr735a_l3: ldo3 {
regulator-name = "pmr735a_l3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pmr735a_l4: ldo4 {
regulator-name = "pmr735a_l4";
regulator-min-microvolt = <1776000>;
regulator-max-microvolt = <1872000>;
};
pmr735a_l5: ldo5 {
regulator-name = "pmr735a_l5";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
pmr735a_l6: ldo6 {
regulator-name = "pmr735a_l6";
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <904000>;
};
pmr735a_l7: ldo7 {
regulator-name = "pmr735a_l7";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
};
&cdsp {
status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
};
&i2c1 {
status = "okay";
clock-frequency = <1000000>;
/* Some subset of SONY IMX663 camera sensor @ 38 */
};
&i2c4 {
status = "okay";
clock-frequency = <400000>;
/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
};
&i2c11 {
status = "okay";
clock-frequency = <1000000>;
cs35l41_l: speaker-amp@40 {
compatible = "cirrus,cs35l41";
reg = <0x40>;
interrupt-parent = <&tlmm>;
interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
cirrus,boost-peak-milliamp = <4000>;
cirrus,boost-ind-nanohenry = <1000>;
cirrus,boost-cap-microfarad = <15>;
cirrus,asp-sdout-hiz = <3>;
cirrus,gpio2-src-select = <2>;
cirrus,gpio2-output-enable;
#sound-dai-cells = <1>;
};
cs35l41_r: speaker-amp@41 {
compatible = "cirrus,cs35l41";
reg = <0x41>;
interrupt-parent = <&tlmm>;
interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
cirrus,boost-peak-milliamp = <4000>;
cirrus,boost-ind-nanohenry = <1000>;
cirrus,boost-cap-microfarad = <15>;
cirrus,asp-sdout-hiz = <3>;
cirrus,gpio2-src-select = <2>;
cirrus,gpio2-output-enable;
#sound-dai-cells = <1>;
};
};
&i2c12 {
status = "okay";
/* Clock frequency was not specified downstream, let's park it to 100 KHz */
clock-frequency = <100000>;
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&i2c13 {
status = "okay";
/* Clock frequency was not specified downstream, let's park it to 100 KHz */
clock-frequency = <100000>;
/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
};
&i2c15 {
status = "okay";
clock-frequency = <400000>;
/* NXP SN1X0 NFC @ 28 */
};
&i2c17 {
status = "okay";
clock-frequency = <1000000>;
/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
};
&ipa {
qcom,gsi-loader = "self";
memory-region = <&pil_ipa_fw_mem>;
firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
status = "okay";
};
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
};
&pm8350_gpios {
gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
"LCD_ID",
"SDR_MMW_THERM",
"RF_ID",
"NC",
"FP_LDO_EN",
"SP_ARI_PWR_ALARM",
"NC",
"G_ASSIST_N",
"PM8350_OPTION"; /* GPIO_10 */
g_assist_n: g-assist-n-state {
pins = "gpio9";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm8350b_gpios {
snapshot_n: snapshot-n-state {
pins = "gpio5";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
focus_n: focus-n-state {
pins = "gpio8";
function = "normal";
power-source = <0>;
input-enable;
bias-pull-up;
};
};
&pmk8350_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"VOL_DOWN_N",
"PMK8350_OPTION";
vol_down_n: vol-down-n-state {
pins = "gpio3";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pmk8350_rtc {
status = "okay";
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
status = "okay";
linux,code = <KEY_VOLUMEUP>;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&qupv3_id_2 {
status = "okay";
};
&sdhc_2 {
cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
vmmc-supply = <&pm8350c_l9>;
vqmmc-supply = <&pm8350c_l6>;
no-sdio;
no-mmc;
status = "okay";
};
&slpi {
status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
};
&spi14 {
status = "okay";
/* NXP SN1X0 NFC Secure Element @ 0 */
};
&tlmm {
gpio-reserved-ranges = <44 4>;
gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
"APPS_I2C_0_SCL",
"UWIDEC_PWR_EN",
"HAP_RST_N",
"NC",
"NC",
"PM8008_1_RESET_N",
"NC",
"OIS_TELE_I2C_SDA",
"OIS_TELE_I2C_SCL",
"PM8350_OPTION", /* GPIO_10 */
"NC",
"APPS_I2C_1_SDA",
"APPS_I2C_1_SCL",
"NC",
"NC",
"CAM1_RESET_N",
"LEO_CAM0_RESET_N",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"TS_I2C_SDA", /* GPIO_20 */
"TS_I2C_SCL",
"TS_RESET_N",
"TS_INT_N",
"DISP_RESET_N",
"SW_SERVICE",
"DISP_ERR_FG",
"TX_GTR_THRES_IN",
"NC",
"NC",
"NC", /* GPIO_30 */
"NC",
"NC",
"NC",
"NC",
"NC",
"SPK_AMP_INT_N",
"SPK_AMP_RESET_N",
"FP_INT_N",
"FP_RESET_N",
"NC", /* GPIO_40 */
"NC",
"DEBUG_GPIO0",
"FORCE_USB_BOOT",
"FP_SPI_MISO",
"FP_SPI_MOSI",
"FP_SPI_CLK",
"FP_SPI_CS_N",
"SPK_AMP_I2C_SDA",
"SPK_AMP_I2C_SCL",
"NC", /* GPIO_50 */
"HAP_INT_N",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"SBU_SW_OE",
"SBU_SW_SEL",
"NFC_ESE_SPI_MISO",
"NFC_ESE_SPI_MOSI",
"NFC_ESE_SPI_CLK",
"NFC_ESE_SPI_CS",
"NFC_I2C_SDA", /* GPIO_60 */
"NFC_I2C_SCL",
"NFC_EN",
"NFC_CLK_REQ",
"HST_WLAN_EN",
"HST_BT_EN",
"HW_ID_0",
"HW_ID_1",
"HST_BT_UART_CTS",
"HST_BT_UART_RFR",
"HST_BT_UART_TX", /* GPIO_70 */
"HST_BT_UART_RX",
"HAP_I2C_SDA",
"HAP_I2C_SCL",
"RF_LCD_ID_EN",
"RF_ID_EXTENSION",
"NC",
"NC",
"NC",
"NC",
"HALL_INT_N", /* GPIO_80 */
"USB_CC_DIR",
"DISP_VSYNC",
"NC",
"NC",
"CAM_SOF_TELE",
"NFC_DWL_REQ",
"NFC_IRQ",
"WCD_RST_N",
"ALS_PROX_INT_N",
"NC", /* GPIO_90 */
"NC",
"TRAY_DET",
"UDON_SWITCH_SEL",
"PCIE0_RESET_N",
"PCIE0_CLK_REQ_N",
"PCIE0_WAKE_N",
"CAM_SOF",
"RF_ID_EXTENSION_2",
"RGBC_IR_INT",
"CAM_MCLK0", /* GPIO_100 */
"CAM_MCLK1",
"CAM_MCLK2",
"CAM_MCLK3",
"NC",
"NC",
"CAM2_RESET_N",
"CCI_I2C0_SDA",
"CCI_I2C0_SCL",
"CCI_I2C1_SDA",
"CCI_I2C1_SCL", /* GPIO_110 */
"CCI_I2C2_SDA",
"CCI_I2C2_SCL",
"CCI_I2C3_SDA",
"CCI_I2C3_SCL",
"NC",
"PM8008_1_IRQ",
"CAM3_RESET_N",
"IMU1_INT",
"EXT_VD0_XVS",
"NC", /* GPIO_120 */
"NC",
"NC",
"NC",
"NC",
"HAP_I2S_CLK",
"HAP_I2S_DOUT",
"HAP_TRG1",
"HAP_I2S_SYNC",
"HST_BT_WLAN_SLIMBUS_CLK",
"HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
"NC",
"UIM2_DETECT_EN",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_PRESENT",
"UIM1_DATA",
"UIM1_CLK",
"UIM1_RESET",
"TRAY_DET", /* GPIO_140 */
"SM_RFFE0_CLK",
"SM_RFFE0_DATA",
"SM_RFFE1_CLK",
"SM_RFFE1_DATA",
"SM_MSS_GRFC4",
"SM_MSS_GRFC5",
"SM_MSS_GRFC6",
"SM_MSS_GRFC7",
"SM_RFFE4_CLK",
"SM_RFFE4_DATA", /* GPIO_150 */
"WLAN_COEX_UART1_RX",
"WLAN_COEX_UART1_TX",
"HST_SW_CTRL",
"DISP_VDDR_EN",
"NC",
"NC",
"PA_INDICATOR_OR",
"NC",
"QLINK0_REQ",
"QLINK0_EN", /* GPIO_160 */
"QLINK0_WMSS_RESET_N",
"NC",
"NC",
"NC",
"PM8008_2_IRQ",
"TELEC_PWR_EN",
"PM8008_2_RESET_N",
"WCD_SWR_TX_CLK",
"WCD_SWR_TX_DATA0",
"WCD_SWR_TX_DATA1", /* GPIO_170 */
"WCD_SWR_RX_CLK",
"WCD_SWR_RX_DATA0",
"WCD_SWR_RX_DATA1",
"SM_DMIC1_CLK",
"SM_DMIC1_DATA",
"SM_DMIC2_CLK",
"SM_DMIC2_DATA",
"SPK_AMP_I2S_CLK",
"SPK_AMP_I2S_WS",
"SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
"SPK_AMP_I2S_ASP_DOUT",
"WCD_SWR_TX_DATA2",
"NC",
"NC",
"NC",
"NC",
"IMU_SPI_MISO",
"IMU_SPI_MOSI",
"IMU_SPI_CLK",
"IMU_SPI_CS_N", /* GPIO_190 */
"MAG_I2C_SDA",
"MAG_I2C_SCL",
"SENSOR_I2C_SDA",
"SENSOR_I2C_SCL",
"NC",
"NC",
"NC",
"NC",
"HST_BLE_UART_TX",
"HST_BLE_UART_RX", /* GPIO_200 */
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
ts_int_default: ts-int-default-state {
pins = "gpio23";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_card_det_active: sd-card-det-active-state {
pins = "gpio92";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
sdc2_card_det_sleep: sd-card-det-sleep-state {
pins = "gpio92";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&pm8350_l5>;
vdda18-supply = <&pm8350c_l1>;
vdda33-supply = <&pm8350_l2>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&pm8350_l6>;
vdda-pll-supply = <&pm8350_l1>;
};