// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2019 NXP
*/
#include <dt-bindings/clock/imx8mm-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/imx8mm-power.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mm-pinfunc.h"
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &fec1;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
idle-states {
entry-method = "psci";
cpu_pd_wait: cpu-pd-wait {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0010033>;
local-timer-stop;
entry-latency-us = <1000>;
exit-latency-us = <700>;
min-residency-us = <2700>;
};
};
A53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
a53_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <850000>;
opp-supported-hw = <0xe>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <950000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1000000>;
opp-supported-hw = <0x8>, <0x3>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "osc_32k";
};
osc_24m: clock-osc-24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "osc_24m";
};
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext1";
};
clk_ext2: clock-ext2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext2";
};
clk_ext3: clock-ext3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext3";
};
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
clock-frequency = <8000000>;
arm,no-tick-in-suspend;
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu>;
trips {
cpu_alert0: trip0 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
usbphynop1: usbphynop1 {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
power-domains = <&pgc_otg1>;
};
usbphynop2: usbphynop2 {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
power-domains = <&pgc_otg2>;
};
soc: soc@0 {
compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
nvmem-cells = <&imx8mm_uid>;
nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
spba2: spba-bus@30000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30000000 0x100000>;
ranges;
sai1: sai@30010000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
<&clk IMX8MM_CLK_SAI1_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai2: sai@30020000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
<&clk IMX8MM_CLK_SAI2_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai3: sai@30030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
<&clk IMX8MM_CLK_SAI3_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai5: sai@30050000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
<&clk IMX8MM_CLK_SAI5_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai6: sai@30060000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
<&clk IMX8MM_CLK_SAI6_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
micfil: audio-controller@30080000 {
compatible = "fsl,imx8mm-micfil";
reg = <0x30080000 0x10000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_PDM_IPG>,
<&clk IMX8MM_CLK_PDM_ROOT>,
<&clk IMX8MM_AUDIO_PLL1_OUT>,
<&clk IMX8MM_AUDIO_PLL2_OUT>,
<&clk IMX8MM_CLK_EXT3>;
clock-names = "ipg_clk", "ipg_clk_app",
"pll8k", "pll11k", "clkext3";
dmas = <&sdma2 24 25 0x80000000>;
dma-names = "rx";
status = "disabled";
};
spdif1: spdif@30090000 {
compatible = "fsl,imx35-spdif";
reg = <0x30090000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
<&clk IMX8MM_CLK_24M>, /* rxtx0 */
<&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
<&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
<&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
<&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
<&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
<&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
<&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
<&clk IMX8MM_CLK_DUMMY>; /* spba */
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7", "spba";
dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
dma-names = "rx", "tx";
status = "disabled";
};
};
gpio1: gpio@30200000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 10 30>;
};
gpio2: gpio@30210000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30210000 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 40 21>;
};
gpio3: gpio@30220000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30220000 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 61 26>;
};
gpio4: gpio@30230000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30230000 0x10000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 87 32>;
};
gpio5: gpio@30240000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30240000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 119 30>;
};
tmu: tmu@30260000 {
compatible = "fsl,imx8mm-tmu";
reg = <0x30260000 0x10000>;
clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
nvmem-cells = <&tmu_calib>;
nvmem-cell-names = "calib";
#thermal-sensor-cells = <0>;
};
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
status = "disabled";
};
wdog2: watchdog@30290000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30290000 0x10000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
status = "disabled";
};
wdog3: watchdog@302a0000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x302a0000 0x10000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
status = "disabled";
};
sdma2: dma-controller@302c0000 {
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
<&clk IMX8MM_CLK_SDMA2_ROOT>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
sdma3: dma-controller@302b0000 {
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
<&clk IMX8MM_CLK_SDMA3_ROOT>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
iomuxc: pinctrl@30330000 {
compatible = "fsl,imx8mm-iomuxc";
reg = <0x30330000 0x10000>;
};
gpr: syscon@30340000 {
compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
ocotp: efuse@30350000 {
compatible = "fsl,imx8mm-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
/* For nvmem subnodes */
#address-cells = <1>;
#size-cells = <1>;
/*
* The register address below maps to the MX8M
* Fusemap Description Table entries this way.
* Assuming
* reg = <ADDR SIZE>;
* then
* Fuse Address = (ADDR * 4) + 0x400
* Note that if SIZE is greater than 4, then
* each subsequent fuse is located at offset
* +0x10 in Fusemap Description Table (e.g.
* reg = <0x4 0x8> describes fuses 0x410 and
* 0x420).
*/
imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
reg = <0x4 0x8>;
};
cpu_speed_grade: speed-grade@10 { /* 0x440 */
reg = <0x10 4>;
};
tmu_calib: calib@3c { /* 0x4f0 */
reg = <0x3c 4>;
};
fec_mac_address: mac-address@90 { /* 0x640 */
reg = <0x90 6>;
};
};
anatop: clock-controller@30360000 {
compatible = "fsl,imx8mm-anatop";
reg = <0x30360000 0x10000>;
#clock-cells = <1>;
};
snvs: snvs@30370000 {
compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
clock-names = "snvs-rtc";
};
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
compatible = "fsl,imx8mm-snvs-lpgpr",
"fsl,imx7d-snvs-lpgpr";
};
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mm-ccm";
reg = <0x30380000 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
<&clk IMX8MM_CLK_A53_CORE>,
<&clk IMX8MM_CLK_NOC>,
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_ARM_PLL_OUT>,
<&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
<750000000>,
<594000000>,
<393216000>;
};
src: reset-controller@30390000 {
compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@303a0000 {
compatible = "fsl,imx8mm-gpc";
reg = <0x303a0000 0x10000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
pgc {
#address-cells = <1>;
#size-cells = <0>;
pgc_hsiomix: power-domain@0 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
};
pgc_pcie: power-domain@1 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_PCIE>;
power-domains = <&pgc_hsiomix>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
};
pgc_otg1: power-domain@2 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_OTG1>;
};
pgc_otg2: power-domain@3 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_OTG2>;
};
pgc_gpumix: power-domain@4 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
<&clk IMX8MM_CLK_GPU_AHB>;
assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
<&clk IMX8MM_CLK_GPU_AHB>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <800000000>, <400000000>;
};
pgc_gpu: power-domain@5 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_GPU>;
clocks = <&clk IMX8MM_CLK_GPU_AHB>,
<&clk IMX8MM_CLK_GPU_BUS_ROOT>,
<&clk IMX8MM_CLK_GPU2D_ROOT>,
<&clk IMX8MM_CLK_GPU3D_ROOT>;
resets = <&src IMX8MQ_RESET_GPU_RESET>;
power-domains = <&pgc_gpumix>;
};
pgc_vpumix: power-domain@6 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
};
pgc_vpu_g1: power-domain@7 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
};
pgc_vpu_g2: power-domain@8 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
};
pgc_vpu_h1: power-domain@9 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
};
pgc_dispmix: power-domain@10 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>;
assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
<&clk IMX8MM_CLK_DISP_APB>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <500000000>, <200000000>;
};
pgc_mipi: power-domain@11 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_MIPI>;
};
};
};
};
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
pwm1: pwm@30660000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
<&clk IMX8MM_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <3>;
status = "disabled";
};
pwm2: pwm@30670000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
reg = <0x30670000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
<&clk IMX8MM_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <3>;
status = "disabled";
};
pwm3: pwm@30680000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
reg = <0x30680000 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
<&clk IMX8MM_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <3>;
status = "disabled";
};
pwm4: pwm@30690000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
reg = <0x30690000 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
<&clk IMX8MM_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <3>;
status = "disabled";
};
system_counter: timer@306a0000 {
compatible = "nxp,sysctr-timer";
reg = <0x306a0000 0x20000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc_24m>;
clock-names = "per";
};
};
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
<0x8000000 0x8000000 0x10000000>;
spba1: spba-bus@30800000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30800000 0x100000>;
ranges;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
<&clk IMX8MM_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi2: spi@30830000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
<&clk IMX8MM_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi3: spi@30840000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
<&clk IMX8MM_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
<&clk IMX8MM_CLK_UART1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@30880000 {
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
<&clk IMX8MM_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
<&clk IMX8MM_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
};
crypto: crypto@30900000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;
ranges = <0 0x30900000 0x40000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_AHB>,
<&clk IMX8MM_CLK_IPG_ROOT>;
clock-names = "aclk", "ipg";
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a20000 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
status = "disabled";
};
i2c2: i2c@30a30000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a30000 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
status = "disabled";
};
i2c3: i2c@30a40000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
reg = <0x30a40000 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
status = "disabled";
};
i2c4: i2c@30a50000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a50000 0x10000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
status = "disabled";
};
uart4: serial@30a60000 {
compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
reg = <0x30a60000 0x10000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
<&clk IMX8MM_CLK_UART4_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
mu: mailbox@30aa0000 {
compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
reg = <0x30aa0000 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_MU_ROOT>;
#mbox-cells = <2>;
};
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
usdhc2: mmc@30b50000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
usdhc3: mmc@30b60000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
flexspi: spi@30bb0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nxp,imx8mm-fspi";
reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
<&clk IMX8MM_CLK_QSPI_ROOT>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
<&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
fec1: ethernet@30be0000 {
compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
<&clk IMX8MM_CLK_ENET_PHY_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
<&clk IMX8MM_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_SYS_PLL2_100M>,
<&clk IMX8MM_SYS_PLL2_125M>,
<&clk IMX8MM_SYS_PLL2_50M>;
assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
};
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
lcdif: lcdif@32e00000 {
compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
reg = <0x32e00000 0x10000>;
clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
<&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
<&clk IMX8MM_CLK_DISP_AXI>,
<&clk IMX8MM_CLK_DISP_APB>;
assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
<&clk IMX8MM_SYS_PLL2_1000M>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <594000000>, <500000000>, <200000000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
status = "disabled";
port {
lcdif_to_dsim: endpoint {
remote-endpoint = <&dsim_from_lcdif>;
};
};
};
mipi_dsi: dsi@32e10000 {
compatible = "fsl,imx8mm-mipi-dsim";
reg = <0x32e10000 0x400>;
clocks = <&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>;
clock-names = "bus_clk", "sclk_mipi";
assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_CLK_24M>;
assigned-clock-rates = <266000000>, <24000000>;
samsung,pll-clock-frequency = <24000000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsim_from_lcdif: endpoint {
remote-endpoint = <&lcdif_to_dsim>;
};
};
};
};
csi: csi@32e20000 {
compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
reg = <0x32e20000 0x1000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
clock-names = "mclk";
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
status = "disabled";
port {
csi_in: endpoint {
remote-endpoint = <&imx8mm_mipi_csi_out>;
};
};
};
disp_blk_ctrl: blk-ctrl@32e28000 {
compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
reg = <0x32e28000 0x100>;
power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
<&pgc_dispmix>, <&pgc_mipi>,
<&pgc_mipi>;
power-domain-names = "bus", "csi-bridge",
"lcdif", "mipi-dsi",
"mipi-csi";
clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
<&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>,
<&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_DISP_ROOT>,
<&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>,
<&clk IMX8MM_CLK_CSI1_CORE>,
<&clk IMX8MM_CLK_CSI1_PHY_REF>;
clock-names = "csi-bridge-axi","csi-bridge-apb",
"csi-bridge-core", "lcdif-axi",
"lcdif-apb", "lcdif-pix",
"dsi-pclk", "dsi-ref",
"csi-aclk", "csi-pclk";
#power-domain-cells = <1>;
};
mipi_csi: mipi-csi@32e30000 {
compatible = "fsl,imx8mm-mipi-csi2";
reg = <0x32e30000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
clock-frequency = <333000000>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
<&clk IMX8MM_CLK_CSI1_PHY_REF>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>;
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
imx8mm_mipi_csi_out: endpoint {
remote-endpoint = <&csi_in>;
};
};
};
};
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
power-domains = <&pgc_hsiomix>;
status = "disabled";
};
usbmisc1: usbmisc@32e40200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
"fsl,imx6q-usbmisc";
#index-cells = <1>;
reg = <0x32e40200 0x200>;
};
usbotg2: usb@32e50000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
power-domains = <&pgc_hsiomix>;
status = "disabled";
};
usbmisc2: usbmisc@32e50200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
"fsl,imx6q-usbmisc";
#index-cells = <1>;
reg = <0x32e50200 0x200>;
};
pcie_phy: pcie-phy@32f00000 {
compatible = "fsl,imx8mm-pcie-phy";
reg = <0x32f00000 0x10000>;
clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
clock-names = "ref";
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
assigned-clock-rates = <100000000>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
resets = <&src IMX8MQ_RESET_PCIEPHY>;
reset-names = "pciephy";
#phy-cells = <0>;
status = "disabled";
};
};
dma_apbh: dma-controller@33000000 {
compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x33000000 0x2000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
};
gpmi: nand-controller@33002000 {
compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
clock-names = "gpmi_io", "gpmi_bch_apb";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
status = "disabled";
};
pcie0: pcie@33800000 {
compatible = "fsl,imx8mm-pcie";
reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
linux,pci-domain = <0>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
<&clk IMX8MM_CLK_PCIE1_PHY>,
<&clk IMX8MM_CLK_PCIE1_AUX>;
clock-names = "pcie", "pcie_bus", "pcie_aux";
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
reset-names = "apps", "turnoff";
phys = <&pcie_phy>;
phy-names = "pcie-phy";
status = "disabled";
};
pcie0_ep: pcie-ep@33800000 {
compatible = "fsl,imx8mm-pcie-ep";
reg = <0x33800000 0x400000>,
<0x18000000 0x8000000>;
reg-names = "dbi", "addr_space";
num-lanes = <1>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma";
fsl,max-link-speed = <2>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
<&clk IMX8MM_CLK_PCIE1_PHY>,
<&clk IMX8MM_CLK_PCIE1_AUX>;
clock-names = "pcie", "pcie_bus", "pcie_aux";
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
reset-names = "apps", "turnoff";
phys = <&pcie_phy>;
phy-names = "pcie-phy";
num-ib-windows = <4>;
num-ob-windows = <4>;
status = "disabled";
};
gpu_3d: gpu@38000000 {
compatible = "vivante,gc";
reg = <0x38000000 0x8000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPU_AHB>,
<&clk IMX8MM_CLK_GPU_BUS_ROOT>,
<&clk IMX8MM_CLK_GPU3D_ROOT>,
<&clk IMX8MM_CLK_GPU3D_ROOT>;
clock-names = "reg", "bus", "core", "shader";
assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
power-domains = <&pgc_gpu>;
};
gpu_2d: gpu@38008000 {
compatible = "vivante,gc";
reg = <0x38008000 0x8000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_GPU_AHB>,
<&clk IMX8MM_CLK_GPU_BUS_ROOT>,
<&clk IMX8MM_CLK_GPU2D_ROOT>;
clock-names = "reg", "bus", "core";
assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
power-domains = <&pgc_gpu>;
};
vpu_g1: video-codec@38300000 {
compatible = "nxp,imx8mm-vpu-g1";
reg = <0x38300000 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
};
vpu_g2: video-codec@38310000 {
compatible = "nxp,imx8mq-vpu-g2";
reg = <0x38310000 0x10000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
};
vpu_blk_ctrl: blk-ctrl@38330000 {
compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
reg = <0x38330000 0x100>;
power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
<&pgc_vpu_g2>, <&pgc_vpu_h1>;
power-domain-names = "bus", "g1", "g2", "h1";
clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
<&clk IMX8MM_CLK_VPU_G2_ROOT>,
<&clk IMX8MM_CLK_VPU_H1_ROOT>;
clock-names = "g1", "g2", "h1";
assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
<&clk IMX8MM_CLK_VPU_G2>;
assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
<&clk IMX8MM_VPU_PLL_OUT>;
assigned-clock-rates = <600000000>,
<600000000>;
#power-domain-cells = <1>;
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
<0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
ddrc: memory-controller@3d400000 {
compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
reg = <0x3d400000 0x400000>;
clock-names = "core", "pll", "alt", "apb";
clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
<&clk IMX8MM_DRAM_PLL>,
<&clk IMX8MM_CLK_DRAM_ALT>,
<&clk IMX8MM_CLK_DRAM_APB>;
};
ddr-pmu@3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
};
};