# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sony IMX415 CMOS Image Sensor maintainers: - Michael Riesch <michael.riesch@wolfvision.net> description: |- The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type solid-state image sensor with a square pixel array and 8.46 M effective pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface 1.8 V triple power supply, and has low power consumption. The IMX415 is programmable through I2C interface. The sensor output is available via CSI-2 serial data output (two or four lanes). allOf: - $ref: ../video-interface-devices.yaml# properties: compatible: const: sony,imx415 reg: maxItems: 1 clocks: description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz) maxItems: 1 avdd-supply: description: Analog power supply (2.9 V) dvdd-supply: description: Digital power supply (1.1 V) ovdd-supply: description: Interface power supply (1.8 V) reset-gpios: description: Sensor reset (XCLR) GPIO maxItems: 1 flash-leds: true lens-focus: true orientation: true rotation: true port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: oneOf: - items: - const: 1 - const: 2 - items: - const: 1 - const: 2 - const: 3 - const: 4 required: - data-lanes - link-frequencies required: - endpoint required: - compatible - reg - clocks - avdd-supply - dvdd-supply - ovdd-supply - port additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; imx415: camera-sensor@1a { compatible = "sony,imx415"; reg = <0x1a>; avdd-supply = <&vcc2v9_cam>; clocks = <&clock_cam>; dvdd-supply = <&vcc1v1_cam>; lens-focus = <&vcm>; orientation = <2>; ovdd-supply = <&vcc1v8_cam>; reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>; rotation = <180>; port { imx415_ep: endpoint { data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <445500000>; remote-endpoint = <&mipi_in>; }; }; }; }; ...