// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> */ #include "socfpga_cyclone5.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board"; compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; stdout-path = "serial0:115200n8"; }; memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; }; aliases { ethernet0 = &gmac1; }; regulator_3_3v: regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; leds: gpio-leds { compatible = "gpio-leds"; hps_led0 { label = "hps:green:led0"; gpios = <&portb 12 GPIO_ACTIVE_LOW>; }; hps_led1 { label = "hps:green:led1"; gpios = <&portb 13 GPIO_ACTIVE_LOW>; }; hps_led2 { label = "hps:green:led2"; gpios = <&portb 14 GPIO_ACTIVE_LOW>; }; hps_led3 { label = "hps:green:led3"; gpios = <&portb 15 GPIO_ACTIVE_LOW>; }; }; }; &gmac1 { status = "okay"; phy-mode = "rgmii"; phy = <&phy0>; mdio0 { #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@0 { reg = <0>; rxd0-skew-ps = <0>; rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; rxd3-skew-ps = <0>; rxdv-skew-ps = <0>; rxc-skew-ps = <3000>; txen-skew-ps = <0>; txc-skew-ps = <3000>; }; }; }; &gpio1 { status = "okay"; }; &i2c0 { status = "okay"; eeprom@51 { compatible = "atmel,24c32"; reg = <0x51>; pagesize = <32>; }; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; &mmc0 { cd-gpios = <&portb 18 0>; vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; status = "okay"; }; &usb1 { status = "okay"; }; &qspi { status = "okay"; flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; }; };