# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/serial/renesas,scifa.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communications Interface with FIFO A (SCIFA) maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> allOf: - $ref: serial.yaml# properties: compatible: oneOf: - items: - enum: - renesas,scifa-r8a73a4 # R-Mobile APE6 - renesas,scifa-r8a7740 # R-Mobile A1 - renesas,scifa-sh73a0 # SH-Mobile AG5 - const: renesas,scifa # generic SCIFA compatible UART - items: - enum: - renesas,scifa-r8a7742 # RZ/G1H - renesas,scifa-r8a7743 # RZ/G1M - renesas,scifa-r8a7744 # RZ/G1N - renesas,scifa-r8a7745 # RZ/G1E - renesas,scifa-r8a7790 # R-Car H2 - renesas,scifa-r8a7791 # R-Car M2-W - renesas,scifa-r8a7793 # R-Car M2-N - renesas,scifa-r8a7794 # R-Car E2 - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1 - const: renesas,scifa # generic SCIFA compatible UART reg: maxItems: 1 interrupts: maxItems: 1 clocks: maxItems: 1 clock-names: enum: - fck # UART functional clock power-domains: maxItems: 1 resets: maxItems: 1 dmas: minItems: 2 maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. dma-names: minItems: 2 maxItems: 4 items: enum: - tx - rx required: - compatible - reg - interrupts - clocks - clock-names - power-domains unevaluatedProperties: false if: properties: compatible: contains: enum: - renesas,rcar-gen2-scifa then: required: - resets examples: - | #include <dt-bindings/clock/r8a7790-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7790-sysc.h> aliases { serial0 = &scifa0; }; scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0xe6c40000 64>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 204>; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; };