// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
/dts-v1/;
#include "glymur.dtsi"
#include "pmcx0102.dtsi"
#include "pmh0101.dtsi"
#include "pmh0110-glymur.dtsi"
#include "pmh0104-glymur.dtsi"
#include "pmk8850.dtsi"
#include "smb2370.dtsi"
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
compatible = "asus,zenbook-a14-ux3407na", "qcom,glymur";
model = "ASUS Zenbook A14 (UX3407NA)";
aliases {
i2c0 = &i2c0;
i2c5 = &i2c5;
i2c8 = &i2c8;
i2c10 = &i2c10;
i2c19 = &i2c19;
serial0 = &uart14;
};
clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32000>;
#clock-cells = <0>;
};
xo_board: xo-board {
compatible = "fixed-clock";
clock-frequency = <38400000>;
#clock-cells = <0>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&hall_int_n_default>;
pinctrl-names = "default";
switch-lid {
label = "lid";
gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
wakeup-source;
wakeup-event-action = <EV_ACT_DEASSERTED>;
};
};
hdmi-bridge {
compatible = "parade,ps185hdm";
pinctrl-0 = <&usb2_dp_hot_plug_detect>;
pinctrl-names = "default";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hdmi_bridge_in: endpoint {
remote-endpoint = <&usb_2_qmpphy_out_dp>;
};
};
port@1 {
reg = <1>;
hdmi_bridge_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&hdmi_bridge_out>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&cam_indicator_en>,
<&keyboard_cam_led>,
<&keyboard_mic_led>;
pinctrl-names = "default";
keyboard-camera-led {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
default-state = "off";
panic-indicator;
};
keyboard-mic-led {
function = LED_FUNCTION_MICMUTE;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
default-state = "off";
panic-indicator;
};
privacy-led {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_WHITE>;
gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
default-state = "off";
panic-indicator;
};
};
pmic-glink {
compatible = "qcom,glymur-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
/* Left side display-adjacent port */
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_0_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&usb_0_qmpphy_out>;
};
};
};
};
/* Left side user-adjacent port */
connector@1 {
compatible = "usb-c-connector";
reg = <1>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in1: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in1: endpoint {
remote-endpoint = <&usb_1_qmpphy_out>;
};
};
};
};
};
vreg_edp: regulator-edp {
compatible = "regulator-fixed";
regulator-name = "VREG_EDP_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&edp_pwr_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_misc_3p3: regulator-misc-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_MISC_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&misc_3p3_reg_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
};
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
regulator-name = "VREG_NVME_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pmh0101_gpios 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_wcn_3p3: regulator-wcn-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wcn_sw_en>;
pinctrl-names = "default";
regulator-boot-on;
};
reserved-memory {
linux,cma {
compatible = "shared-dma-pool";
size = <0x0 0x10000000>;
reusable;
linux,cma-default;
};
};
sound {
compatible = "qcom,glymur-sndcard";
model = "GLYMUR-ASUS-Zenbook-A14-UX3407NA";
audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
"SpkrRight IN", "WSA WSA_SPK2 OUT",
"VA DMIC0", "vdd-micb",
"VA DMIC1", "vdd-micb";
va-dai-link {
link-name = "VA Capture";
codec {
sound-dai = <&lpass_vamacro 0>;
};
cpu {
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
codec {
sound-dai = <&left_speaker>, <&right_speaker>,
<&swr0 0>, <&lpass_wsamacro 0>;
};
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
wlan-connector {
compatible = "pcie-m2-e-connector";
vpcie3v3-supply = <&vreg_wcn_3p3>;
vpcie1v8-supply = <&vreg_l15b0>;
w-disable1-gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
w-disable2-gpios = <&tlmm 116 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&wcn_wlan_bt_en>;
pinctrl-names = "default";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
m2_e_pcie_ep: endpoint@0 {
reg = <0>;
remote-endpoint = <&pcie4_port0_ep>;
};
};
port@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
m2_e_uart_ep: endpoint@0 {
reg = <0>;
remote-endpoint = <&uart14_ep>;
};
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pmh0101-rpmh-regulators";
qcom,pmic-id = "B_E0";
vreg_l1b0: ldo1 {
regulator-name = "vreg_l1b0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b0: ldo7 {
regulator-name = "vreg_l7b0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b0: ldo8 {
regulator-name = "vreg_l8b0";
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b0: ldo15 {
regulator-name = "vreg_l15b0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
/* Provides reference voltage for many undescribed components */
regulator-always-on;
};
vreg_l18b0: ldo18 {
regulator-name = "vreg_l18b0";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
/*
* This is also reference voltage for &pcie3b wake and
* reset signals.
*/
regulator-always-on;
};
};
regulators-1 {
compatible = "qcom,pmcx0102-rpmh-regulators";
qcom,pmic-id = "C_E1";
vreg_l1c1: ldo1 {
regulator-name = "vreg_l1c1";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c1: ldo2 {
regulator-name = "vreg_l2c1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c1: ldo3 {
regulator-name = "vreg_l3c1";
regulator-min-microvolt = <936000>;
regulator-max-microvolt = <936000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c1: ldo4 {
regulator-name = "vreg_l4c1";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pmh0110-rpmh-regulators";
qcom,pmic-id = "F_E0";
vreg_l2f0: ldo2 {
regulator-name = "vreg_l2f0";
regulator-min-microvolt = <936000>;
regulator-max-microvolt = <936000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3f0: ldo3 {
regulator-name = "vreg_l3f0";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pmh0110-rpmh-regulators";
qcom,pmic-id = "F_E1";
vreg_l1f1: ldo1 {
regulator-name = "vreg_l1f1";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2f1: ldo2 {
regulator-name = "vreg_l2f1";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4f1: ldo4 {
regulator-name = "vreg_l4f1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pmh0110-rpmh-regulators";
qcom,pmic-id = "H_E0";
vreg_l1h0: ldo1 {
regulator-name = "vreg_l1h0";
regulator-min-microvolt = <936000>;
regulator-max-microvolt = <936000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2h0: ldo2 {
regulator-name = "vreg_l2h0";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4h0: ldo4 {
regulator-name = "vreg_l4h0";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&gpu {
status = "okay";
};
&gmu {
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
touchpad@15 {
compatible = "hid-over-i2c";
reg = <0x15>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&vreg_misc_3p3>;
vddl-supply = <&vreg_l15b0>;
pinctrl-0 = <&tpad_default>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
ptn3222_1: redriver@43 {
compatible = "nxp,ptn3222";
reg = <0x43>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
vdd3v3-supply = <&vreg_l8b0>;
vdd1v8-supply = <&vreg_l15b0>;
#phy-cells = <0>;
};
ptn3222_0: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
vdd3v3-supply = <&vreg_l8b0>;
vdd1v8-supply = <&vreg_l15b0>;
#phy-cells = <0>;
};
};
&i2c8 {
clock-frequency = <400000>;
status = "okay";
touchscreen@15 {
compatible = "hid-over-i2c";
reg = <0x15>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&ts_default>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c10 {
clock-frequency = <400000>;
status = "okay";
hid@17 {
compatible = "hid-over-i2c";
reg = <0x17>;
interrupts-extended = <&tlmm 43 IRQ_TYPE_LEVEL_LOW>;
hid-descr-addr = <0x1>;
wakeup-source;
pinctrl-0 = <&hid_app_default>;
pinctrl-names = "default";
};
};
&i2c19 {
clock-frequency = <400000>;
status = "okay";
keyboard@15 {
compatible = "hid-over-i2c";
reg = <0x15>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
pinctrl-0 = <&kybd_default>;
pinctrl-names = "default";
};
};
&lpass_vamacro {
vdd-micb-supply = <&vreg_l1b0>;
pinctrl-0 = <&dmic01_default>;
pinctrl-names = "default";
qcom,dmic-sample-rate = <2400000>;
};
&mdss {
status = "okay";
};
&mdss_dp0 {
status = "okay";
};
&mdss_dp0_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp1 {
status = "okay";
};
&mdss_dp1_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp2 {
status = "okay";
};
&mdss_dp2_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
pinctrl-0 = <&edp0_hpd_default>;
pinctrl-names = "default";
status = "okay";
aux-bus {
panel {
compatible = "samsung,atna40ct06", "samsung,atna33xc20";
enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp>;
pinctrl-0 = <&edp_bl_en>;
pinctrl-names = "default";
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
};
};
};
};
};
&mdss_dp3_out {
data-lanes = <0 1 2 3>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
vdda-phy-supply = <&vreg_l2f1>;
vdda-pll-supply = <&vreg_l4f1>;
status = "okay";
};
&pcie3_phy {
vdda-phy-supply = <&vreg_l3c1>;
vdda-pll-supply = <&vreg_l2c1>;
vdda-refgen0p9-supply = <&vreg_l1c1>;
vdda-refgen1p2-supply = <&vreg_l4f1>;
status = "okay";
};
&pcie3b {
vddpe-3v3-supply = <&vreg_nvme>;
pinctrl-0 = <&pcie3b_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie3b_port0 {
reset-gpios = <&tlmm 155 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 157 GPIO_ACTIVE_LOW>;
};
&pcie4 {
pinctrl-0 = <&pcie4_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie4_phy {
vdda-phy-supply = <&vreg_l1c1>;
vdda-pll-supply = <&vreg_l4f1>;
status = "okay";
};
&pcie4_port0 {
reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
};
&pcie4_port0_ep {
remote-endpoint = <&m2_e_pcie_ep>;
};
&pmh0101_gpios {
nvme_reg_en: nvme-reg-en-state {
pins = "gpio14";
function = "normal";
bias-disable;
};
};
&pmh0110_f_e0_gpios {
misc_3p3_reg_en: misc-3p3-reg-en-state {
pins = "gpio6";
function = "normal";
bias-disable;
input-disable;
output-enable;
drive-push-pull;
power-source = <1>; /* 1.8 V */
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
};
&pmk8850_rtc {
qcom,no-alarm;
};
&remoteproc_adsp {
firmware-name = "qcom/glymur/ASUSTeK/UX3407NA/qcadsp8480.mbn",
"qcom/glymur/ASUSTeK/UX3407NA/adsp_dtbs.elf";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/glymur/ASUSTeK/UX3407NA/qccdsp8480.mbn",
"qcom/glymur/ASUSTeK/UX3407NA/cdsp_dtbs.elf";
status = "okay";
};
&remoteproc_soccp {
status = "okay";
};
&smb2370_j_e2_eusb2_repeater {
vdd18-supply = <&vreg_l15b0>;
vdd3-supply = <&vreg_l7b0>;
};
&smb2370_k_e2_eusb2_repeater {
vdd18-supply = <&vreg_l15b0>;
vdd3-supply = <&vreg_l7b0>;
};
&swr0 {
status = "okay";
/* WSA8845, left */
left_speaker: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrLeft";
vdd-1p8-supply = <&vreg_l15b0>;
vdd-io-supply = <&vreg_l18b0>;
qcom,port-mapping = <1 2 3 7 12 14>;
};
/* WSA8845, right */
right_speaker: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrRight";
vdd-1p8-supply = <&vreg_l15b0>;
vdd-io-supply = <&vreg_l18b0>;
qcom,port-mapping = <4 5 6 7 13 15>;
};
};
&tcsr {
vdda-qrefrpt0-0p9-supply = <&vreg_l2f1>;
vdda-qrefrpt1-0p9-supply = <&vreg_l2f1>;
vdda-qrefrpt2-0p9-supply = <&vreg_l2f1>;
vdda-qrefrpt3-0p9-supply = <&vreg_l2h0>;
vdda-qrefrpt4-0p9-supply = <&vreg_l2h0>;
vdda-qrefrx0-0p9-supply = <&vreg_l2f1>;
vdda-qrefrx1-0p9-supply = <&vreg_l2f1>;
vdda-qrefrx2-0p9-supply = <&vreg_l2f1>;
vdda-qrefrx4-0p9-supply = <&vreg_l2h0>;
vdda-qrefrx5-0p9-supply = <&vreg_l3f0>;
vdda-qreftx0-0p9-supply = <&vreg_l3f0>;
vdda-qreftx0-1p2-supply = <&vreg_l4h0>;
vdda-qreftx1-0p9-supply = <&vreg_l1f1>;
vdda-refgen3-0p9-supply = <&vreg_l2f0>;
vdda-refgen3-1p2-supply = <&vreg_l4h0>;
vdda-refgen4-0p9-supply = <&vreg_l1f1>;
vdda-refgen4-1p2-supply = <&vreg_l4f1>;
};
&tlmm {
gpio-reserved-ranges = <4 4>, /* EC Secure */
<10 2>, /* OOB UART */
<44 4>, /* TPM */
<65 1>, /* EC reset */
<90 2>; /* TPM */
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
bias-disable;
};
edp_bl_en: edp-bl-en-state {
pins = "gpio18";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
hid_app_default: hid-app-default-state {
pins = "gpio43";
function = "gpio";
bias-disable;
};
ts_default: ts-default-state {
reset-n-pins {
pins = "gpio48";
function = "gpio";
bias-disable;
};
int-pins {
pins = "gpio51";
function = "gpio";
bias-disable;
};
};
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
bias-disable;
};
edp_pwr_en: edp-pwr-en-state {
pins = "gpio70";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
hall_int_n_default: hall-int-n-state {
pins = "gpio92";
function = "gpio";
bias-disable;
};
wcn_sw_en: wcn-sw-en-state {
pins = "gpio94";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
keyboard_mic_led: keyboard-mic-led-state {
pins = "gpio98";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
cam_indicator_en: cam-indicator-en-state {
pins = "gpio111";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wcn_wlan_bt_en: wcn-wlan-bt-en-state {
pins = "gpio116", "gpio117";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
edp0_hpd_default: edp0-hpd-default-state {
pins = "gpio119";
function = "edp0_hot";
bias-disable;
};
keyboard_cam_led: keyboard-cam-led-state {
pins = "gpio120";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb2_dp_hot_plug_detect: usb2-dp-hot-plug-detect-state {
pins = "gpio126";
function = "usb2_dp";
bias-disable;
};
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio147";
function = "pcie4_clk_req_n";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio146";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio148";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie3b_default: pcie3b-default-state {
clkreq-n-pins {
pins = "gpio156";
function = "pcie3b_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio155";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio157";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&uart14 {
status = "okay";
port {
uart14_ep: endpoint {
remote-endpoint = <&m2_e_uart_ep>;
};
};
};
&uart21 {
status = "disabled";
};
&usb_0 {
status = "okay";
};
&usb_0_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_0_hsphy {
vdd-supply = <&vreg_l3f0>;
vdda12-supply = <&vreg_l4h0>;
phys = <&smb2370_j_e2_eusb2_repeater>;
status = "okay";
};
&usb_0_qmpphy {
vdda-phy-supply = <&vreg_l3f0>;
vdda-pll-supply = <&vreg_l4h0>;
refgen-supply = <&vreg_l2f0>;
status = "okay";
};
&usb_0_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in1>;
};
&usb_1_hsphy {
vdd-supply = <&vreg_l3f0>;
vdda12-supply = <&vreg_l4h0>;
phys = <&smb2370_k_e2_eusb2_repeater>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l1h0>;
vdda-pll-supply = <&vreg_l4h0>;
refgen-supply = <&vreg_l2f0>;
status = "okay";
};
&usb_1_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in1>;
};
&usb_2_qmpphy {
vdda-phy-supply = <&vreg_l4c1>;
vdda-pll-supply = <&vreg_l4f1>;
refgen-supply = <&vreg_l4f1>;
/delete-property/ mode-switch;
/delete-property/ orientation-switch;
status = "okay";
ports {
port@0 {
#address-cells = <1>;
#size-cells = <0>;
/delete-node/ endpoint;
usb_2_qmpphy_out_dp: endpoint@0 {
reg = <0>;
data-lanes = <3 2 1 0>;
remote-endpoint = <&hdmi_bridge_in>;
};
};
};
};
&usb_mp {
status = "okay";
};
&usb_mp_hsphy0 {
vdd-supply = <&vreg_l2h0>;
vdda12-supply = <&vreg_l4h0>;
phys = <&ptn3222_0>;
status = "okay";
};
&usb_mp_hsphy1 {
vdd-supply = <&vreg_l2h0>;
vdda12-supply = <&vreg_l4h0>;
phys = <&ptn3222_1>;
status = "okay";
};
&usb_mp_qmpphy0 {
vdda-phy-supply = <&vreg_l2h0>;
vdda-pll-supply = <&vreg_l4h0>;
refgen-supply = <&vreg_l4f1>;
status = "okay";
};
&usb_mp_qmpphy1 {
vdda-phy-supply = <&vreg_l2h0>;
vdda-pll-supply = <&vreg_l4h0>;
refgen-supply = <&vreg_l4f1>;
status = "okay";
};