# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Lantiq GSWIP and MaxLinear GSW1xx Ethernet switches

description:
  Lantiq GSWIP and MaxLinear GSW1xx switches share the same hardware IP.
  Lantiq switches are embedded in SoCs and accessed via memory-mapped I/O,
  while MaxLinear switches are standalone ICs connected via MDIO.

$ref: dsa.yaml#

maintainers:
  - Hauke Mehrtens <hauke@hauke-m.de>

properties:
  compatible:
    enum:
      - intel,gsw150
      - lantiq,peb7084
      - lantiq,xrx200-gswip
      - lantiq,xrx300-gswip
      - lantiq,xrx330-gswip
      - maxlinear,gsw120
      - maxlinear,gsw125
      - maxlinear,gsw140
      - maxlinear,gsw141
      - maxlinear,gsw145

  reg:
    minItems: 1
    maxItems: 3

  reg-names:
    items:
      - const: switch
      - const: mdio
      - const: mii

  mdio:
    $ref: /schemas/net/mdio.yaml#
    unevaluatedProperties: false

    properties:
      compatible:
        const: lantiq,xrx200-mdio

  gphy-fw:
    type: object
    properties:
      '#address-cells':
        const: 1

      '#size-cells':
        const: 0

      compatible:
        items:
          - enum:
              - lantiq,xrx200-gphy-fw
              - lantiq,xrx300-gphy-fw
              - lantiq,xrx330-gphy-fw
          - const: lantiq,gphy-fw

      lantiq,rcu:
        $ref: /schemas/types.yaml#/definitions/phandle
        description: phandle to the RCU syscon

    patternProperties:
      "^gphy@[0-9a-f]{1,2}$":
        type: object

        additionalProperties: false

        properties:
          reg:
            minimum: 0
            maximum: 255
            description:
              Offset of the GPHY firmware register in the RCU register range

          resets:
            items:
              - description: GPHY reset line

          reset-names:
            items:
              - const: gphy

        required:
          - reg

    required:
      - compatible
      - lantiq,rcu

    additionalProperties: false

patternProperties:
  "^(ethernet-)?ports$":
    type: object
    patternProperties:
      "^(ethernet-)?port@[0-6]$":
        $ref: dsa-port.yaml#
        allOf:
          - $ref: /schemas/phy/phy-common-props.yaml#
        unevaluatedProperties: false

        properties:
          maxlinear,slew-rate-txc:
            $ref: /schemas/types.yaml#/definitions/uint32
            enum: [0, 1]
            description: |
              RMII/RGMII TX Clock Slew Rate:

                0: Normal
                1: Slow

              If not present, the configuration made by the switch bootloader is
              preserved.
          maxlinear,slew-rate-txd:
            $ref: /schemas/types.yaml#/definitions/uint32
            enum: [0, 1]
            description: |
              RMII/RGMII TX Non-Clock PAD Slew Rate:

                0: Normal
                1: Slow

              If not present, the configuration made by the switch bootloader is
              preserved.
          maxlinear,rmii-refclk-out:
            type: boolean
            description:
              Configure the RMII reference clock to be a clock output
              rather than an input. Only applicable for RMII mode.
          tx-internal-delay-ps:
            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
            description:
              RGMII TX Clock Delay defined in pico seconds.
              The delay lines adjust the MII clock vs. data timing.
              If this property is not present the delay is determined by
              the interface mode.
          rx-internal-delay-ps:
            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
            description:
              RGMII RX Clock Delay defined in pico seconds.
              The delay lines adjust the MII clock vs. data timing.
              If this property is not present the delay is determined by
              the interface mode.

required:
  - compatible
  - reg

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - lantiq,xrx200-gswip
              - lantiq,xrx300-gswip
              - lantiq,xrx330-gswip
    then:
      properties:
        reg:
          minItems: 3
          maxItems: 3
        mdio:
          required:
            - compatible
    else:
      properties:
        reg:
          maxItems: 1
        reg-names: false
        gphy-fw: false

unevaluatedProperties: false

examples:
  - |
    switch@e108000 {
            compatible = "lantiq,xrx200-gswip";
            reg = <0xe108000 0x3100>,  /* switch */
                  <0xe10b100 0xd8>,    /* mdio */
                  <0xe10b1d8 0x130>;   /* mii */
            dsa,member = <0 0>;

            ports {
                    #address-cells = <1>;
                    #size-cells = <0>;

                    port@0 {
                            reg = <0>;
                            label = "lan3";
                            phy-mode = "rgmii-id";
                            phy-handle = <&phy0>;
                            tx-internal-delay-ps = <2000>;
                            rx-internal-delay-ps = <2000>;
                    };

                    port@1 {
                            reg = <1>;
                            label = "lan4";
                            phy-mode = "rgmii";
                            phy-handle = <&phy1>;
                    };

                    port@2 {
                            reg = <2>;
                            label = "lan2";
                            phy-mode = "internal";
                            phy-handle = <&phy11>;
                    };

                    port@4 {
                            reg = <4>;
                            label = "lan1";
                            phy-mode = "internal";
                            phy-handle = <&phy13>;
                    };

                    port@5 {
                            reg = <5>;
                            label = "wan";
                            phy-mode = "rgmii";
                            phy-handle = <&phy5>;
                    };

                    port@6 {
                            reg = <0x6>;
                            phy-mode = "internal";
                            ethernet = <&eth0>;

                            fixed-link {
                                    speed = <1000>;
                                    full-duplex;
                            };
                    };
            };

            mdio {
                    #address-cells = <1>;
                    #size-cells = <0>;
                    compatible = "lantiq,xrx200-mdio";

                    phy0: ethernet-phy@0 {
                            reg = <0x0>;
                    };
                    phy1: ethernet-phy@1 {
                            reg = <0x1>;
                    };
                    phy5: ethernet-phy@5 {
                            reg = <0x5>;
                    };
                    phy11: ethernet-phy@11 {
                            reg = <0x11>;
                    };
                    phy13: ethernet-phy@13 {
                            reg = <0x13>;
                    };
            };

            gphy-fw {
                    #address-cells = <1>;
                    #size-cells = <0>;
                    compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
                    lantiq,rcu = <&rcu0>;

                    gphy@20 {
                            reg = <0x20>;

                            resets = <&reset0 31 30>;
                            reset-names = "gphy";
                    };

                    gphy@68 {
                            reg = <0x68>;

                            resets = <&reset0 29 28>;
                            reset-names = "gphy";
                    };
            };
    };

  - |
    #include <dt-bindings/leds/common.h>
    #include <dt-bindings/phy/phy.h>

    mdio {
        #address-cells = <1>;
        #size-cells = <0>;

        switch@1f {
            compatible = "maxlinear,gsw125";
            reg = <0x1f>;

            ports {
                #address-cells = <1>;
                #size-cells = <0>;

                port@0 {
                    reg = <0>;
                    label = "lan0";
                    phy-handle = <&switchphy0>;
                    phy-mode = "internal";
                };

                port@1 {
                    reg = <1>;
                    label = "lan1";
                    phy-handle = <&switchphy1>;
                    phy-mode = "internal";
                };

                port@4 {
                    reg = <4>;
                    label = "wan";
                    phy-mode = "1000base-x";
                    managed = "in-band-status";
                    tx-polarity = <PHY_POL_INVERT>;
                };

                port@5 {
                    reg = <5>;
                    phy-mode = "rgmii-id";
                    tx-internal-delay-ps = <2000>;
                    rx-internal-delay-ps = <2000>;
                    ethernet = <&eth0>;

                    fixed-link {
                        speed = <1000>;
                        full-duplex;
                    };
                };
            };

            mdio {
                #address-cells = <1>;
                #size-cells = <0>;

                switchphy0: ethernet-phy@0 {
                    reg = <0>;

                    leds {
                        #address-cells = <1>;
                        #size-cells = <0>;

                        led@0 {
                            reg = <0>;
                            color = <LED_COLOR_ID_GREEN>;
                            function = LED_FUNCTION_LAN;
                        };
                    };
                };

                switchphy1: ethernet-phy@1 {
                    reg = <1>;

                    leds {
                        #address-cells = <1>;
                        #size-cells = <0>;

                        led@0 {
                            reg = <0>;
                            color = <LED_COLOR_ID_GREEN>;
                            function = LED_FUNCTION_LAN;
                        };
                    };
                };
            };
        };
    };