// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 NXP Semiconductors. * Author: Fabio Estevam <fabio.estevam@nxp.com> */ /dts-v1/; #include <dt-bindings/input/input.h> #include "imx7s.dtsi" / { model = "Element14 Warp i.MX7 Board"; compatible = "element14,imx7s-warp", "fsl,imx7s"; memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&pinctrl_gpio>; autorepeat; back { label = "Back"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; wakeup-source; }; }; reg_brcm: regulator-brcm { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_brcm_reg>; regulator-name = "brcm_reg"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <200000>; }; reg_bt: regulator-bt { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_bt_reg>; enable-active-high; gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; regulator-name = "bt_reg"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_peri_3p15v: regulator-peri-3p15v { compatible = "regulator-fixed"; regulator-name = "peri_3p15v_reg"; regulator-min-microvolt = <3150000>; regulator-max-microvolt = <3150000>; regulator-always-on; }; sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,frame-master = <&dailink_master>; simple-audio-card,cpu { sound-dai = <&sai1>; }; dailink_master: simple-audio-card,codec { sound-dai = <&codec>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; }; }; }; &clks { assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>; assigned-clock-rates = <884736000>; }; &csi { status = "okay"; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; regulators { sw1a_reg: sw1a { regulator-min-microvolt = <700000>; regulator-max-microvolt = <1475000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; /* use sw1c_reg to align with pfuze100/pfuze200 */ sw1c_reg: sw1b { regulator-min-microvolt = <700000>; regulator-max-microvolt = <1475000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1650000>; regulator-boot-on; regulator-always-on; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; regulator-boot-on; regulator-always-on; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen2_reg: vldo2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vccsd { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen4_reg: v33 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vldo3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; ov2680: camera@36 { compatible = "ovti,ov2680"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov2680>; reg = <0x36>; clocks = <&osc>; clock-names = "xvclk"; reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; DOVDD-supply = <&sw2_reg>; DVDD-supply = <&sw2_reg>; AVDD-supply = <®_peri_3p15v>; port { ov2680_to_mipi: endpoint { remote-endpoint = <&mipi_from_sensor>; clock-lanes = <0>; data-lanes = <1>; }; }; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; }; &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; codec: sgtl5000@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1_mclk>; VDDA-supply = <&vgen4_reg>; VDDIO-supply = <&vgen4_reg>; VDDD-supply = <&vgen2_reg>; }; mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; }; }; &mipi_csi { clock-frequency = <166000000>; status = "okay"; ports { port@0 { reg = <0>; mipi_from_sensor: endpoint { remote-endpoint = <&ov2680_to_mipi>; data-lanes = <1>; }; }; }; }; &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, <&clks IMX7D_SAI1_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; assigned-clock-rates = <0>, <36864000>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; uart-has-rtscts; status = "okay"; }; &uart6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart6>; assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; fsl,dte-mode; status = "okay"; }; &usbotg1 { dr_mode = "peripheral"; status = "okay"; }; &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; keep-power-in-suspend; no-1-8-v; non-removable; vmmc-supply = <®_brcm>; status = "okay"; }; &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; no-1-8-v; fsl,tuning-step = <2>; non-removable; status = "okay"; }; &video_mux { status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; &iomuxc { pinctrl_brcm_reg: brcmreggrp { fsl,pins = < MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */ >; }; pinctrl_bt_reg: btreggrp { fsl,pins = < MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* BT_REG_ON */ >; }; pinctrl_gpio: gpiogrp { fsl,pins = < MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x14 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f >; }; pinctrl_ov2680: ov2660grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 >; }; pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30 >; }; pinctrl_sai1_mclk: sai1mclkgrp { fsl,pins = < MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79 MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79 >; }; pinctrl_uart6: uart6grp { fsl,pins = < MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79 MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 MX7D_PAD_SD1_CLK__SD1_CLK 0x19 MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */ >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x19 >; }; pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1a >; }; pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b >; }; }; &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; };