// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2026 Arm Ltd.
*/
/dts-v1/;
#include "sun50i-a100.dtsi"
#include "sun50i-a100-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/{
model = "Teclast P80";
compatible = "teclast,p80", "allwinner,sun50i-a133";
chassis-type = "tablet";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc5v: vcc5v {
/* external power input from the USB-C port*/
compatible = "regulator-fixed";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "vcc-5v";
};
speaker_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
sound-name-prefix = "Speaker Amp";
};
};
&cpu0 {
cpu-supply = <®_dcdc2>;
};
&ehci0 {
status = "okay";
};
&mmc0 {
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
vmmc-supply = <®_dcdc1>;
status = "okay";
};
&mmc2 {
bus-width = <8>;
cap-mmc-hw-reset;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_eldo1>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&r_i2c0 {
status = "okay";
axp803: pmic@34 {
compatible = "x-powers,axp803";
reg = <0x34>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
};
};
#include "axp803.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
®_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-codec-avcc";
};
®_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dram-1";
};
®_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-pl";
};
®_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-io-usb-pd-mmc";
};
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd-cpux";
};
®_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdd-usb-cpus";
};
®_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-name = "vdd-sys";
};
®_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vcc-dram";
};
®_dc1sw {
regulator-name = "vcc-dc1sw";
};
®_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
®_dldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dldo1";
};
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-eldo1";
};
®_eldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-eldo3";
};
®_fldo1 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdd-cpus-usb";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
usb0_vbus-supply = <®_drivevbus>;
usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
status = "okay";
};