# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/pmbus/adi,max20826.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices MAX20826 PMBus Voltage Regulator
maintainers:
- Nuno Sá <nuno.sa@analog.com>
description:
Analog Devices MAX20826 and similar devices are Dual-Output Multiphase
High-Current Controller.
properties:
compatible:
enum:
- adi,max20826
- adi,max20855b
- adi,max20908
- adi,max20912
- adi,max20916
reg:
maxItems: 1
vdd3p3-supply:
description:
3.3V bias supply. It is the input of the internal 1.8V linear regulator
which supplies the controller.
avren-gpios:
description: GPIO pin to enable/disable the output voltage on Rail A.
maxItems: 1
bvren-gpios:
description: GPIO pin to enable/disable the output voltage on Rail B.
maxItems: 1
adi,rail-a-high-speed:
type: boolean
description:
The output voltage of Rail A is controlled by the high-speed processor
voltage-control interface the device powered up in (PWMVID, SVID, SVI3 or
AVSBus). If not given, PMBus controls the output voltage of Rail A.
adi,rail-b-high-speed:
type: boolean
description:
Same as adi,rail-a-high-speed but for Rail B.
regulators:
type: object
description:
List of regulators provided by this controller. vout0 is Rail A and
vout1 is Rail B.
patternProperties:
"^vout[0-1]$":
$ref: /schemas/regulator/regulator.yaml#
type: object
unevaluatedProperties: false
additionalProperties: false
required:
- compatible
- reg
- vdd3p3-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
regulator@64 {
compatible = "adi,max20826";
reg = <0x64>;
vdd3p3-supply = <&vdd3p3>;
avren-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
bvren-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
adi,rail-a-high-speed;
regulators {
vout0 {
regulator-name = "vcore_a";
};
vout1 {
regulator-name = "vcore_b";
};
};
};
};