# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller

maintainers:
  - Eugen Hristev <eugen.hristev@microchip.com>

allOf:
  - $ref: watchdog.yaml#

properties:
  compatible:
    enum:
      - atmel,sama5d4-wdt
      - microchip,sam9x60-wdt
      - microchip,sama7g5-wdt

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  atmel,watchdog-type:
    $ref: /schemas/types.yaml#/definitions/string
    description: should be hardware or software.
    oneOf:
      - description:
          Enable watchdog fault reset. A watchdog fault triggers
          watchdog reset.
        const: hardware
      - description:
          Enable watchdog fault interrupt. A watchdog fault asserts
          watchdog interrupt.
        const: software
    default: hardware

  atmel,idle-halt:
    $ref: /schemas/types.yaml#/definitions/flag
    description: |
      present if you want to stop the watchdog when the CPU is in idle state.
      CAUTION: This property should be used with care, it actually makes the
      watchdog not counting when the CPU is in idle state, therefore the
      watchdog reset time depends on mean CPU usage and will not reset at all
      if the CPU stop working while it is in idle state, which is probably
      not what you want.

  atmel,dbg-halt:
    $ref: /schemas/types.yaml#/definitions/flag
    description: |
      present if you want to stop the watchdog when the CPU is in debug state.

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    watchdog@fc068640 {
        compatible = "atmel,sama5d4-wdt";
        reg = <0xfc068640 0x10>;
        interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
        timeout-sec = <10>;
        atmel,watchdog-type = "hardware";
        atmel,dbg-halt;
        atmel,idle-halt;
    };

...