# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/econet,en7528-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: EcoNet EN7528 Pin Controller
maintainers:
- Lorenzo Bianconi <lorenzo@kernel.org>
description:
The EcoNet EN7528 pin controller is used to control SoC pins. It shares the
IP with the Airoha pin controllers, but its IOMUX and pin configuration
registers have a different layout.
properties:
compatible:
const: econet,en7528-pinctrl
airoha,chip-scu:
description: phandle to the chip SCU syscon
$ref: /schemas/types.yaml#/definitions/phandle
interrupts:
maxItems: 1
gpio-controller: true
'#gpio-cells':
const: 2
gpio-ranges:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
patternProperties:
'-pins$':
type: object
patternProperties:
'^mux(-|$)':
type: object
description:
pinmux configuration nodes.
$ref: /schemas/pinctrl/pinmux-node.yaml
properties:
function:
description:
A string containing the name of the function to mux to the group.
enum: [gpio, jtag, pcie_reset, pcm, pcm_spi, phy1_led0,
phy1_led1, phy2_led0, phy2_led1, phy3_led0, phy3_led1,
phy4_led0, phy4_led1, pnand, pon, pwm, sipo, spi, uart]
groups:
description:
An array of strings. Each string contains the name of a group.
items:
enum: [pon, sipo, sipo_rclk, uart2, uart2_cts_rts, uart3,
ejtag, pcm1, pcm2, spi_quad, spi_cs1, pcm_spi,
pcm_spi_int, pcm_spi_rst, pcm_spi_cs1, pcm_spi_cs2,
pcm_spi_cs3, pcm_spi_cs4, pcm_spi_cs5, pcm_spi_cs6,
pcm_spi_cs7, pnand, gpio0, gpio1, gpio2, gpio3, gpio4,
gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11,
gpio12, gpio13, gpio14, gpio15, gpio16, gpio17,
gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
gpio24, gpio25, gpio26, gpio27, gpio28, gpio29,
gpio30, gpio31, gpio32, gpio33, gpio34, gpio35,
gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
pcie_reset0, pcie_reset1]
required:
- function
- groups
additionalProperties: false
'^conf(-|$)':
type: object
description:
pinconf configuration nodes.
$ref: /schemas/pinctrl/pincfg-node.yaml
properties:
pins:
description:
An array of strings. Each string contains the name of a pin.
items:
enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
gpio38, gpio39, pcie_reset0, pcie_reset1, i2c_sda,
i2c_scl, uart_txd, uart_rxd, spi_cs0, spi_clk,
spi_mosi, spi_miso]
minItems: 1
maxItems: 50
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
output-enable: true
output-low: true
output-high: true
drive-strength:
description:
Selects the drive strength for the pin, in mA.
enum: [2, 4]
required:
- pins
additionalProperties: false
additionalProperties: false
required:
- compatible
- airoha,chip-scu
- interrupts
- gpio-controller
- gpio-ranges
- "#gpio-cells"
- interrupt-controller
- "#interrupt-cells"
allOf:
- $ref: pinctrl.yaml#
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
pinctrl {
compatible = "econet,en7528-pinctrl";
airoha,chip-scu = <&chip_scu>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 10 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&pinctrl 0 0 42>;
uart2-pins {
mux {
function = "uart";
groups = "uart2";
};
conf {
pins = "gpio28", "gpio29";
bias-pull-up;
};
};
pwm-pins {
mux {
function = "pwm";
groups = "gpio30";
};
};
};