// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) 2026 Marek Vasut <marex@nabladev.com>
*
* Set up pipeline for raw bayer capture:
* $ media-ctl -d platform:48030000.dcmipp -r
* $ media-ctl -d platform:48030000.dcmipp -l '"48020000.csi":1->"dcmipp_input":0[1]'
* $ media-ctl -d platform:48030000.dcmipp -l "'dcmipp_input':1->'dcmipp_dump_postproc':0[1]"
* $ media-ctl -d platform:48030000.dcmipp --set-v4l2 "'imx219 0-0010':0[fmt:SRGGB8_1X8/1920x1080]"
* $ media-ctl -d platform:48030000.dcmipp --set-v4l2 "'48020000.csi':1[fmt:SRGGB8_1X8/1920x1080]"
* $ media-ctl -d platform:48030000.dcmipp --set-v4l2 "'dcmipp_input':1[fmt:SRGGB8_1X8/1920x1080 field:none]"
* $ media-ctl -d platform:48030000.dcmipp --set-v4l2 "'dcmipp_dump_postproc':0[compose:(0,0)/1920x1080]"
* $ media-ctl -d platform:48030000.dcmipp --set-v4l2 "'dcmipp_dump_postproc':1[fmt:SRGGB8_1X8/1920x1080]"
* $ v4l2-ctl -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat=RGGB
*
* Capture frame using v4l2-ctl:
* $ v4l2-ctl -d /dev/video0 --stream-mmap --stream-count=1 --stream-to=/frame.raw
*
* Capture frame using gstreamer:
* $ gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! \
* video/x-bayer,width=1920,height=1080,format=rggb ! \
* bayer2rgb ! jpegenc ! filesink location=/test.jpg
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
&{/} {
clk_cam_x10: clk-cam-j1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
/* Page 29 / CSI_IF_CN / J1 */
reg_cam_x10: reg-cam-j1 {
compatible = "regulator-fixed";
regulator-name = "cam-X10";
enable-active-high;
gpios = <&ioexp 13 GPIO_ACTIVE_HIGH>;
};
};
&csi {
vdd-supply = <&scmi_vddcore>;
vdda18-supply = <&scmi_v1v8>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
csi_sink: endpoint {
remote-endpoint = <&imx219_x10_out>;
data-lanes = <1 2>;
bus-type = <4>;
};
};
port@1 {
reg = <1>;
csi_source: endpoint {
remote-endpoint = <&dcmipp_0>;
};
};
};
};
&dcmipp {
status = "okay";
port {
dcmipp_0: endpoint {
remote-endpoint = <&csi_source>;
bus-type = <4>;
};
};
};
&i2c2 {
#address-cells = <1>;
#size-cells = <0>;
cam@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&clk_cam_x10>;
VANA-supply = <®_cam_x10>;
VDIG-supply = <®_cam_x10>;
VDDL-supply = <®_cam_x10>;
orientation = <2>;
rotation = <0>;
port {
imx219_x10_out: endpoint {
clock-noncontinuous;
link-frequencies = /bits/ 64 <456000000>;
data-lanes = <1 2>;
remote-endpoint = <&csi_sink>;
};
};
};
};