// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
 */

/dts-v1/;

/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9

#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "kodiak.dtsi"
#include "pm7250b.dtsi"
#include "pm7325.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */
#include "qcs6490-audioreach.dtsi"

/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &mpss_mem;
/delete-node/ &remoteproc_mpss;
/delete-node/ &remoteproc_wpss;
/delete-node/ &rmtfs_mem;
/delete-node/ &video_mem;
/delete-node/ &wifi;
/delete-node/ &wlan_ce_mem;
/delete-node/ &wlan_fw_mem;
/delete-node/ &wpss_mem;
/delete-node/ &xbl_mem;

/ {
	model = "Radxa Dragon Q6A";
	compatible = "radxa,dragon-q6a", "qcom,qcm6490";
	chassis-type = "embedded";

	aliases {
		mmc0 = &sdhc_1;
		mmc1 = &sdhc_2;
		serial0 = &uart5;
	};

	wcd938x: audio-codec {
		compatible = "qcom,wcd9380-codec";

		pinctrl-0 = <&wcd_default>;
		pinctrl-names = "default";

		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;

		vdd-rxtx-supply = <&vreg_l18b_1p8>;
		vdd-io-supply = <&vreg_l18b_1p8>;
		vdd-buck-supply = <&vreg_l17b_1p8>;
		vdd-mic-bias-supply = <&vreg_bob_3p296>;

		qcom,micbias1-microvolt = <1800000>;
		qcom,micbias2-microvolt = <1800000>;
		qcom,micbias3-microvolt = <1800000>;
		qcom,micbias4-microvolt = <1800000>;
		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
		qcom,rx-device = <&wcd_rx>;
		qcom,tx-device = <&wcd_tx>;

		qcom,hphl-jack-type-normally-closed;

		#sound-dai-cells = <1>;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	usb2_1_con: connector-0 {
		compatible = "usb-a-connector";
		vbus-supply = <&vcc_5v_peri>;

		port {
			usb2_1_connector: endpoint {
				remote-endpoint = <&usb_hub_2_1>;
			};
		};
	};

	usb2_2_con: connector-1 {
		compatible = "usb-a-connector";
		vbus-supply = <&vcc_5v_peri>;

		port {
			usb2_2_connector: endpoint {
				remote-endpoint = <&usb_hub_2_2>;
			};
		};
	};

	usb2_3_con: connector-2 {
		compatible = "usb-a-connector";
		vbus-supply = <&vcc_5v_peri>;

		port {
			usb2_3_connector: endpoint {
				remote-endpoint = <&usb_hub_2_3>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-0 = <&user_led>;
		pinctrl-names = "default";

		user-led {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_INDICATOR;
			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "none";
			default-state = "off";
			panic-indicator;
		};
	};

	reserved-memory {
		xbl_mem: xbl@80700000 {
			reg = <0x0 0x80700000 0x0 0x100000>;
			no-map;
		};

		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
			reg = <0x0 0x81800000 0x0 0x1e00000>;
			no-map;
		};

		camera_mem: camera@84300000 {
			reg = <0x0 0x84300000 0x0 0x500000>;
			no-map;
		};

		adsp_mem: adsp@84800000 {
			reg = <0x0 0x84800000 0x0 0x2800000>;
			no-map;
		};

		cdsp_mem: cdsp@87000000 {
			reg = <0x0 0x87000000 0x0 0x1e00000>;
			no-map;
		};

		video_mem: video@88e00000 {
			reg = <0x0 0x88e00000 0x0 0x700000>;
			no-map;
		};

		cvp_mem: cvp@89500000 {
			reg = <0x0 0x89500000 0x0 0x500000>;
			no-map;
		};

		gpu_microcode_mem: gpu-microcode@89a00000 {
			reg = <0x0 0x89a00000 0x0 0x2000>;
			no-map;
		};

		tz_stat_mem: tz-stat@c0000000 {
			reg = <0x0 0xc0000000 0x0 0x100000>;
			no-map;
		};

		tags_mem: tags@c0100000 {
			reg = <0x0 0xc0100000 0x0 0x1200000>;
			no-map;
		};

		qtee_mem: qtee@c1300000 {
			reg = <0x0 0xc1300000 0x0 0x500000>;
			no-map;
		};

		trusted_apps_mem: trusted-apps@c1800000 {
			reg = <0x0 0xc1800000 0x0 0x1c00000>;
			no-map;
		};

		debug_vm_mem: debug-vm@d0600000 {
			reg = <0x0 0xd0600000 0x0 0x100000>;
			no-map;
		};
	};

	thermal-zones {
		msm-skin-thermal {
			polling-delay-passive = <0>;
			thermal-sensors = <&pmk8350_adc_tm 2>;
		};

		quiet-thermal {
			polling-delay-passive = <0>;
			thermal-sensors = <&pmk8350_adc_tm 1>;
		};

		ufs-thermal {
			polling-delay-passive = <0>;
			thermal-sensors = <&pmk8350_adc_tm 3>;
		};

		xo-thermal {
			polling-delay-passive = <0>;
			thermal-sensors = <&pmk8350_adc_tm 0>;
		};
	};

	vcc_1v8: regulator-vcc-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc_5v_peri>;

		regulator-boot-on;
		regulator-always-on;
	};

	vcc_3v3: regulator-vcc-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_5v_peri>;

		regulator-boot-on;
		regulator-always-on;
	};

	vcc_5v_peri: regulator-vcc-5v-peri {
		compatible = "regulator-fixed";
		regulator-name = "vcc_5v_peri";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vph_pwr>;

		regulator-boot-on;
		regulator-always-on;
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;

		regulator-boot-on;
		regulator-always-on;
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7325-rpmh-regulators";
		qcom,pmic-id = "b";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>;
		vdd-l2-l7-supply = <&vreg_bob_3p296>;
		vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>;
		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>;

		vreg_s1b_1p84: smps1 {
			regulator-name = "vreg_s1b_1p84";
			regulator-min-microvolt = <1840000>;
			regulator-max-microvolt = <2040000>;
		};

		vreg_s7b_0p536: smps7 {
			regulator-name = "vreg_s7b_0p536";
			regulator-min-microvolt = <536000>;
			regulator-max-microvolt = <1120000>;
		};

		vreg_s8b_1p2: smps8 {
			regulator-name = "vreg_s8b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1496000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
		};

		vreg_l1b_0p912: ldo1 {
			regulator-name = "vreg_l1b_0p912";
			regulator-min-microvolt = <832000>;
			regulator-max-microvolt = <920000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
							RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b_3p072: ldo2 {
			regulator-name = "vreg_l2b_3p072";
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
							RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6b_1p2: ldo6 {
			regulator-name = "vreg_l6b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1256000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
							RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b_2p96: ldo7 {
			regulator-name = "vreg_l7b_2p96";
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
							RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b_1p2: ldo9 {
			regulator-name = "vreg_l9b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b_1p8: ldo17 {
			regulator-name = "vreg_l17b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1896000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b_1p8: ldo18 {
			regulator-name = "vreg_l18b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-always-on;
		};

		vreg_l19b_1p8: ldo19 {
			regulator-name = "vreg_l19b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8350c-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-s9-supply = <&vph_pwr>;
		vdd-s10-supply = <&vph_pwr>;
		vdd-l1-l12-supply = <&vreg_s1b_1p84>;
		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
		vdd-l10-supply = <&vreg_s7b_0p536>;
		vdd-bob-supply = <&vph_pwr>;

		vreg_l1c_1p8: ldo1 {
			regulator-name = "vreg_l1c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1976000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6c_2p96: ldo6 {
			regulator-name = "vreg_l6c_2p96";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_2p96: ldo9 {
			regulator-name = "vreg_l9c_2p96";
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10c_0p88: ldo10 {
			regulator-name = "vreg_l10c_0p88";
			regulator-min-microvolt = <720000>;
			regulator-max-microvolt = <1048000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob_3p296: bob {
			regulator-name = "vreg_bob_3p296";
			regulator-min-microvolt = <3032000>;
			regulator-max-microvolt = <3960000>;
		};
	};
};

&gcc {
	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
			   <GCC_MSS_CFG_AHB_CLK>,
			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
			   <GCC_MSS_OFFLINE_AXI_CLK>,
			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
			   <GCC_MSS_SNOC_AXI_CLK>,
			   <GCC_SEC_CTRL_CLK_SRC>,
			   <GCC_WPSS_AHB_BDG_MST_CLK>,
			   <GCC_WPSS_AHB_CLK>,
			   <GCC_WPSS_RSCP_CLK>;
};

&gpi_dma0 {
	status = "okay";
};

&gpi_dma1 {
	status = "okay";
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/qcs6490/a660_zap.mbn";
};

/* Pin 13, 15 in GPIO header */
&i2c0 {
	qcom,enable-gsi-dma;
	status = "okay";
};

/* Pin 27, 28 in GPIO header */
&i2c2 {
	qcom,enable-gsi-dma;
	status = "okay";
};

/* Pin 3, 5 in GPIO header */
&i2c6 {
	qcom,enable-gsi-dma;
	status = "okay";
};

&i2c10 {
	qcom,enable-gsi-dma;
	status = "okay";

	rtc: rtc@68 {
		compatible = "st,m41t11";
		reg = <0x68>;
	};
};

/* External touchscreen */
&i2c13 {
	qcom,enable-gsi-dma;
	status = "okay";
};

&ipa {
	/delete-property/ memory-region;
};

&lpass_audiocc {
	compatible = "qcom,qcm6490-lpassaudiocc";
	/delete-property/ power-domains;
};

&lpass_rx_macro {
	status = "okay";
};

&lpass_tx_macro {
	status = "okay";
};

&lpass_va_macro {
	status = "okay";
};

&pcie0 {
	pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
	pinctrl-names = "default";

	status = "okay";
};

&pcie0_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&pcie0_port {
	reset-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
};

&pcie1 {
	pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
	pinctrl-names = "default";

	/* Support for QPS615 PCIe switch */
	iommu-map = <0x0 &apps_smmu 0x1c80 0x0 0x1>,
		    <0x100 &apps_smmu 0x1c81 0x0 0x1>,
		    <0x208 &apps_smmu 0x1c84 0x0 0x1>,
		    <0x210 &apps_smmu 0x1c85 0x0 0x1>,
		    <0x218 &apps_smmu 0x1c86 0x0 0x1>,
		    <0x300 &apps_smmu 0x1c87 0x0 0x1>,
		    <0x400 &apps_smmu 0x1c88 0x0 0x1>,
		    <0x500 &apps_smmu 0x1c89 0x0 0x1>,
		    <0x501 &apps_smmu 0x1c90 0x0 0x1>;

	status = "okay";
};

&pcie1_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&pcie1_port0 {
	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};

&pm7325_gpios {
	pm7325_adc_default: adc-default-state {
		pins = "gpio2";
		function = PMIC_GPIO_FUNC_NORMAL;
		bias-high-impedance;
	};
};

&pm7325_temp_alarm {
	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pmk8350_adc_tm {
	status = "okay";

	xo-therm@0 {
		reg = <0>;
		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	quiet-therm@1 {
		reg = <1>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	msm-skin-therm@2 {
		reg = <2>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};

	ufs-therm@3 {
		reg = <3>;
		io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pmk8350_vadc {
	pinctrl-0 = <&pm7325_adc_default>;
	pinctrl-names = "default";

	channel@3 {
		reg = <PMK8350_ADC7_DIE_TEMP>;
		label = "pmk7325_die_temp";
		qcom,pre-scaling = <1 1>;
	};

	channel@44 {
		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
		label = "xo_therm";
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		qcom,ratiometric;
	};

	channel@103 {
		reg = <PM7325_ADC7_DIE_TEMP>;
		label = "pm7325_die_temp";
		qcom,pre-scaling = <1 1>;
	};

	channel@144 {
		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "quiet_therm";
	};

	channel@146 {
		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "msm_skin_therm";
	};

	channel@14a {
		/* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */
		reg = <PM7325_ADC7_GPIO1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		label = "ufs_therm";
	};
};

&pon_pwrkey {
	status = "okay";
};

&qspi {
	/* It's not possible to use QSPI with iommu */
	/* due to an error in qcom_smmu_write_s2cr */
	/delete-property/ iommus;

	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>,
				<&qspi_data1>, <&qspi_data23>;
	pinctrl-1 = <&qspi_sleep>;
	pinctrl-names = "default", "sleep";

	status = "okay";

	spi_flash: flash@0 {
		compatible = "winbond,w25q256", "jedec,spi-nor";
		reg = <0>;

		spi-max-frequency = <104000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
	};
};

&qupv3_id_0 {
	firmware-name = "qcom/qcm6490/qupv3fw.elf";
	status = "okay";
};

&qupv3_id_1 {
	firmware-name = "qcom/qcm6490/qupv3fw.elf";
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn";
	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/qcs6490/cdsp.mbn";
	status = "okay";
};

&sdhc_1 {
	non-removable;
	no-sd;
	no-sdio;

	vmmc-supply = <&vreg_l7b_2p96>;
	vqmmc-supply = <&vreg_l19b_1p8>;

	status = "okay";
};

&sdhc_2 {
	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;

	vmmc-supply = <&vreg_l9c_2p96>;
	vqmmc-supply = <&vreg_l6c_2p96>;

	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&sound {
	compatible = "qcom,qcs6490-rb3gen2-sndcard";
	model = "QCS6490-Radxa-Dragon-Q6A";

	audio-routing = "IN1_HPHL", "HPHL_OUT",
			"IN2_HPHR", "HPHR_OUT",
			"AMIC2", "MIC BIAS2",
			"TX SWR_ADC1", "ADC2_OUTPUT";

	wcd-playback-dai-link {
		link-name = "WCD Playback";

		codec {
			sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};

	wcd-capture-dai-link {
		link-name = "WCD Capture";

		codec {
			sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};
};

/* Pin 11, 29, 31, 32 in GPIO header */
&spi7 {
	qcom,enable-gsi-dma;
	status = "okay";
};

/* Pin 19, 21, 23, 24, 26 in GPIO header */
&spi12 {
	qcom,enable-gsi-dma;
	status = "okay";
};

/* Pin 22, 33, 36, 37 in GPIO header */
&spi14 {
	qcom,enable-gsi-dma;
	status = "okay";
};

&swr0 {
	status = "okay";

	wcd_rx: codec@0,4 {
		compatible = "sdw20217010d00";
		reg = <0 4>;
		qcom,rx-port-mapping = <1 2 3 4 5>;
	};
};

&swr1 {
	status = "okay";

	wcd_tx: codec@0,3 {
		compatible = "sdw20217010d00";
		reg = <0 3>;
		qcom,tx-port-mapping = <1 1 2 3>;
	};
};

&tlmm {
	gpio-line-names =
		/* GPIO_0 ~ GPIO_3 */
		"PIN_13", "PIN_15", "", "",
		/* GPIO_4 ~ GPIO_7 */
		"", "", "", "",
		/* GPIO_8 ~ GPIO_11 */
		"PIN_27", "PIN_28", "", "",
		/* GPIO_12 ~ GPIO_15 */
		"", "", "", "",
		/* GPIO_16 ~ GPIO_19 */
		"", "", "", "",
		/* GPIO_20 ~ GPIO_23 */
		"", "", "PIN_8", "PIN_10",
		/* GPIO_24 ~ GPIO_27 */
		"PIN_3", "PIN_5", "PIN_16", "PIN_27",
		/* GPIO_28 ~ GPIO_31 */
		"PIN_31", "PIN_11", "PIN_32", "PIN_29",
		/* GPIO_32 ~ GPIO_35 */
		"", "", "", "",
		/* GPIO_36 ~ GPIO_39 */
		"", "", "", "",
		/* GPIO_40 ~ GPIO_43 */
		"", "", "", "",
		/* GPIO_44 ~ GPIO_47 */
		"", "", "", "",
		/* GPIO_48 ~ GPIO_51 */
		"PIN_21", "PIN_19", "PIN_23", "PIN_24",
		/* GPIO_52 ~ GPIO_55 */
		"", "", "", "PIN_26",
		/* GPIO_56 ~ GPIO_59 */
		"PIN_33", "PIN_22", "PIN_37", "PIN_36",
		/* GPIO_60 ~ GPIO_63 */
		"", "", "", "",
		/* GPIO_64 ~ GPIO_67 */
		"", "", "", "",
		/* GPIO_68 ~ GPIO_71 */
		"", "", "", "",
		/* GPIO_72 ~ GPIO_75 */
		"", "", "", "",
		/* GPIO_76 ~ GPIO_79 */
		"", "", "", "",
		/* GPIO_80 ~ GPIO_83 */
		"", "", "", "",
		/* GPIO_84 ~ GPIO_87 */
		"", "", "", "",
		/* GPIO_88 ~ GPIO_91 */
		"", "", "", "",
		/* GPIO_92 ~ GPIO_95 */
		"", "", "", "",
		/* GPIO_96 ~ GPIO_99 */
		"PIN_7", "PIN_12", "PIN_38", "PIN_40",
		/* GPIO_100 ~ GPIO_103 */
		"PIN_35", "", "", "",
		/* GPIO_104 ~ GPIO_107 */
		"", "", "", "",
		/* GPIO_108 ~ GPIO_111 */
		"", "", "", "",
		/* GPIO_112 ~ GPIO_115 */
		"", "", "", "",
		/* GPIO_116 ~ GPIO_119 */
		"", "", "", "",
		/* GPIO_120 ~ GPIO_123 */
		"", "", "", "",
		/* GPIO_124 ~ GPIO_127 */
		"", "", "", "",
		/* GPIO_128 ~ GPIO_131 */
		"", "", "", "",
		/* GPIO_132 ~ GPIO_135 */
		"", "", "", "",
		/* GPIO_136 ~ GPIO_139 */
		"", "", "", "",
		/* GPIO_140 ~ GPIO_143 */
		"", "", "", "",
		/* GPIO_144 ~ GPIO_147 */
		"", "", "", "",
		/* GPIO_148 ~ GPIO_151 */
		"", "", "", "",
		/* GPIO_152 ~ GPIO_155 */
		"", "", "", "",
		/* GPIO_156 ~ GPIO_159 */
		"", "", "", "",
		/* GPIO_160 ~ GPIO_163 */
		"", "", "", "",
		/* GPIO_164 ~ GPIO_167 */
		"", "", "", "",
		/* GPIO_168 ~ GPIO_171 */
		"", "", "", "",
		/* GPIO_172 ~ GPIO_174 */
		"", "", "";

	pcie0_reset_n: pcie0-reset-n-state {
		pins = "gpio87";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	pcie0_wake_n: pcie0-wake-n-state {
		pins = "gpio89";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	pcie1_reset_n: pcie1-reset-n-state {
		pins = "gpio2";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	pcie1_wake_n: pcie1-wake-n-state {
		pins = "gpio3";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	qspi_sleep: qspi-sleep-state {
		pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17";
		function = "gpio";
		output-disable;
	};

	sd_cd: sd-cd-state {
		pins = "gpio91";
		function = "gpio";
		bias-pull-up;
	};

	user_led: user-led-state {
		pins = "gpio42";
		function = "gpio";
		bias-pull-up;
	};

	wcd_default: wcd-reset-n-active-state {
		pins = "gpio83";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
		output-low;
	};
};

&uart5 {
	status = "okay";
};

&usb_2 {
	dr_mode = "host";

	#address-cells = <1>;
	#size-cells = <0>;

	status = "okay";

	/* Onboard USB 2.0 hub */
	usb_hub_2_x: hub@1 {
		compatible = "usb1a40,0101";
		reg = <1>;
		vdd-supply = <&vcc_5v_peri>;
		#address-cells = <1>;
		#size-cells = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@1 {
				reg = <1>;

				usb_hub_2_1: endpoint {
					remote-endpoint = <&usb2_1_connector>;
				};
			};

			port@2 {
				reg = <2>;

				usb_hub_2_2: endpoint {
					remote-endpoint = <&usb2_2_connector>;
				};
			};

			port@3 {
				reg = <3>;

				usb_hub_2_3: endpoint {
					remote-endpoint = <&usb2_3_connector>;
				};
			};
		};

		/* FCU760K Wi-Fi & Bluetooth module */
		wifi@4 {
			compatible = "usba69c,8d80";
			reg = <4>;
		};
	};
};

&usb_2_hsphy {
	vdda-pll-supply = <&vreg_l10c_0p88>;
	vdda33-supply = <&vreg_l2b_3p072>;
	vdda18-supply = <&vreg_l1c_1p8>;

	status = "okay";
};

&venus {
	status = "okay";
};

/* PINCTRL - additions to nodes defined in sc7280.dtsi */
&pcie0_clkreq_n {
	bias-pull-up;
	drive-strength = <2>;
};

&pcie1_clkreq_n {
	bias-pull-up;
	drive-strength = <2>;
};

&qspi_clk {
	bias-disable;
	drive-strength = <16>;
};

&qspi_cs0 {
	bias-disable;
	drive-strength = <8>;
};

&qspi_data0 {
	bias-disable;
	drive-strength = <8>;
};

&qspi_data1 {
	bias-disable;
	drive-strength = <8>;
};

&qspi_data23 {
	bias-disable;
	drive-strength = <8>;
};

&sdc1_clk {
	bias-disable;
	drive-strength = <16>;
};

&sdc1_cmd {
	bias-pull-up;
	drive-strength = <10>;
};

&sdc1_data {
	bias-pull-up;
	drive-strength = <10>;
};

&sdc1_rclk {
	bias-pull-down;
};

&sdc2_clk {
	bias-disable;
	drive-strength = <16>;
};

&sdc2_cmd {
	bias-pull-up;
	drive-strength = <10>;
};

&sdc2_data {
	bias-pull-up;
	drive-strength = <10>;
};