// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "monaco.dtsi"
#include "monaco-pmics.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. Monaco-ac EVK";
	compatible = "qcom,monaco-evk", "qcom,qcs8300";

	aliases {
		ethernet0 = &ethernet0;
		i2c1 = &i2c1;
		serial0 = &uart7;
		serial2 = &uart6;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	connector-2 {
		compatible = "gpio-usb-b-connector", "usb-b-connector";
		label = "micro-USB";
		type = "micro";

		id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>;
		vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>;
		vbus-supply = <&usb2_vbus>;

		pinctrl-0 = <&usb2_id>;
		pinctrl-names = "default";

		port {
			usb2_con_hs_ep: endpoint {
				remote-endpoint = <&usb_2_dwc3_hs>;
			};
		};
	};

	dmic: audio-codec-0 {
		compatible = "dmic-codec";
		#sound-dai-cells = <0>;
		num-channels = <1>;
	};

	max98357a: audio-codec-1 {
		compatible = "maxim,max98357a";
		#sound-dai-cells = <0>;
	};

	dp-connector-0 {
		compatible = "dp-connector";
		label = "DP0";
		type = "mini";

		port {
			dp0_connector_in: endpoint {
				remote-endpoint = <&lt8713sx_dp0_out>;
			};
		};
	};

	dp-connector-1 {
		compatible = "dp-connector";
		label = "DP1";
		type = "mini";

		port {
			dp1_connector_in: endpoint {
				remote-endpoint = <&lt8713sx_dp1_out>;
			};
		};
	};

	usb2_vbus: regulator-usb2-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb2_vbus";
		gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
	};

	sound {
		compatible = "qcom,qcs8275-sndcard";
		model = "MONACO-EVK";

		pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
		pinctrl-names = "default";

		hs0-mi2s-playback-dai-link {
			link-name = "HS0 MI2S Playback";

			codec {
				sound-dai = <&max98357a>;
			};

			cpu {
				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		sec-mi2s-capture-dai-link {
			link-name = "Secondary MI2S Capture";

			codec {
				sound-dai = <&dmic>;
			};

			cpu {
				sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};
	};

	vreg_cam0_2p8: vreg-cam0-2p8 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_cam0_2p8";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		startup-delay-us = <10000>;

		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
		pinctrl-names = "default";
	};

	vreg_cam1_2p8: vreg-cam1-2p8 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_cam1_2p8";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		startup-delay-us = <10000>;

		gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&cam1_avdd_2v8_en_default>;
		pinctrl-names = "default";
	};

	vreg_cam2_2p8: vreg-cam2-2p8 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_cam2_2p8";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		startup-delay-us = <10000>;

		gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&cam2_avdd_2v8_en_default>;
		pinctrl-names = "default";
	};

	/* This comes from a PMIC handled within the SAIL domain */
	vreg_s2s: vreg-s2s {
		compatible = "regulator-fixed";
		regulator-name = "vreg_s2s";

		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pmm8654au-rpmh-regulators";
		qcom,pmic-id = "a";

		vreg_l3a: ldo3 {
			regulator-name = "vreg_l3a";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4a: ldo4 {
			regulator-name = "vreg_l4a";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5a: ldo5 {
			regulator-name = "vreg_l5a";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6a: ldo6 {
			regulator-name = "vreg_l6a";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7a: ldo7 {
			regulator-name = "vreg_l7a";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8a: ldo8 {
			regulator-name = "vreg_l8a";
			regulator-min-microvolt = <2504000>;
			regulator-max-microvolt = <2960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9a: ldo9 {
			regulator-name = "vreg_l9a";
			regulator-min-microvolt = <2970000>;
			regulator-max-microvolt = <3072000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};
		vreg_s4a: smps4 {
			regulator-name = "vreg_s4a";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s9a: smps9 {
			regulator-name = "vreg_s9a";
			regulator-min-microvolt = <1352000>;
			regulator-max-microvolt = <1352000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pmm8654au-rpmh-regulators";
		qcom,pmic-id = "c";

		vreg_s5c: smps5 {
			regulator-name = "vreg_s5c";
			regulator-min-microvolt = <1104000>;
			regulator-max-microvolt = <1104000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l1c: ldo1 {
			regulator-name = "vreg_l1c";
			regulator-min-microvolt = <300000>;
			regulator-max-microvolt = <512000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c: ldo2 {
			regulator-name = "vreg_l2c";
			regulator-min-microvolt = <900000>;
			regulator-max-microvolt = <904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4c: ldo4 {
			regulator-name = "vreg_l4c";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c: ldo7 {
			regulator-name = "vreg_l7c";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8c: ldo8 {
			regulator-name = "vreg_l8c";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c: ldo9 {
			regulator-name = "vreg_l9c";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
		};
	};
};

&ethernet0 {
	phy-mode = "2500base-x";
	phy-handle = <&hsgmii_phy0>;

	pinctrl-0 = <&ethernet0_default>;
	pinctrl-names = "default";

	snps,mtl-rx-config = <&mtl_rx_setup>;
	snps,mtl-tx-config = <&mtl_tx_setup>;
	nvmem-cells = <&mac_addr0>;
	nvmem-cell-names = "mac-address";

	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;

		hsgmii_phy0: ethernet-phy@1c {
			compatible = "ethernet-phy-id004d.d101";
			reg = <0x1c>;
			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
			reset-assert-us = <11000>;
			reset-deassert-us = <70000>;
		};
	};

	mtl_rx_setup: rx-queues-config {
		snps,rx-queues-to-use = <4>;
		snps,rx-sched-sp;

		queue0 {
			snps,dcb-algorithm;
			snps,map-to-dma-channel = <0x0>;
			snps,route-up;
			snps,priority = <0x1>;
		};

		queue1 {
			snps,dcb-algorithm;
			snps,map-to-dma-channel = <0x1>;
			snps,route-ptp;
		};

		queue2 {
			snps,avb-algorithm;
			snps,map-to-dma-channel = <0x2>;
			snps,route-avcp;
		};

		queue3 {
			snps,avb-algorithm;
			snps,map-to-dma-channel = <0x3>;
			snps,priority = <0xc>;
		};
	};

	mtl_tx_setup: tx-queues-config {
		snps,tx-queues-to-use = <4>;

		queue0 {
			snps,dcb-algorithm;
		};

		queue1 {
			snps,dcb-algorithm;
		};

		queue2 {
			snps,avb-algorithm;
			snps,send_slope = <0x1000>;
			snps,idle_slope = <0x1000>;
			snps,high_credit = <0x3e800>;
			snps,low_credit = <0xffc18000>;
		};

		queue3 {
			snps,avb-algorithm;
			snps,send_slope = <0x1000>;
			snps,idle_slope = <0x1000>;
			snps,high_credit = <0x3e800>;
			snps,low_credit = <0xffc18000>;
		};
	};
};

&gpi_dma0 {
	status = "okay";
};

&gpi_dma1 {
	status = "okay";
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/qcs8300/a623_zap.mbn";
};

&i2c0 {
	status = "okay";

	bridge@4f {
		compatible = "lontium,lt8713sx";
		reg = <0x4f>;
		reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				lt8713sx_dp_in: endpoint {
					remote-endpoint = <&mdss_dp0_out>;
				};
			};

			port@1 {
				reg = <1>;

				lt8713sx_dp0_out: endpoint {
					remote-endpoint = <&dp0_connector_in>;
				};
			};

			port@2 {
				reg = <2>;

				lt8713sx_dp1_out: endpoint {
					remote-endpoint = <&dp1_connector_in>;
				};
			};
		};
	};
};

&i2c1 {
	pinctrl-0 = <&qup_i2c1_default>;
	pinctrl-names = "default";

	status = "okay";

	fan_controller: fan@18 {
		compatible = "ti,amc6821";
		reg = <0x18>;
		#pwm-cells = <2>;

		fan {
			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
		};
	};

	eeprom0: eeprom@50 {
		compatible = "atmel,24c256";
		reg = <0x50>;
		pagesize = <64>;

		nvmem-layout {
			compatible = "fixed-layout";
			#address-cells = <1>;
			#size-cells = <1>;

			mac_addr0: mac-addr@0 {
				reg = <0x0 0x6>;
			};
		};
	};
};

&i2c15 {
	pinctrl-0 = <&qup_i2c15_default>;
	pinctrl-names = "default";

	status = "okay";

	expander0: gpio@38 {
		compatible = "ti,tca9538";
		reg = <0x38>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander0_int>;
		pinctrl-names = "default";
	};

	expander1: gpio@39 {
		compatible = "ti,tca9538";
		reg = <0x39>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander1_int>;
		pinctrl-names = "default";
	};

	expander2: gpio@3a {
		compatible = "ti,tca9538";
		reg = <0x3a>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander2_int>;
		pinctrl-names = "default";
	};

	expander3: gpio@3b {
		compatible = "ti,tca9538";
		reg = <0x3b>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander3_int>;
		pinctrl-names = "default";
	};

	expander4: gpio@3c {
		compatible = "ti,tca9538";
		reg = <0x3c>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander4_int>;
		pinctrl-names = "default";
	};

	expander5: gpio@3d {
		compatible = "ti,tca9538";
		reg = <0x3d>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander5_int>;
		pinctrl-names = "default";
	};

	expander6: gpio@3e {
		compatible = "ti,tca9538";
		reg = <0x3e>;
		#gpio-cells = <2>;
		gpio-controller;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-0 = <&expander6_int>;
		pinctrl-names = "default";
	};
};

&iris {
	status = "okay";
};

&mdss {
	status = "okay";
};

&mdss_dp0 {
	pinctrl-0 = <&dp_hot_plug_det>;
	pinctrl-names = "default";

	status = "okay";
};

&mdss_dp0_out {
	data-lanes = <0 1 2 3>;
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
	remote-endpoint = <&lt8713sx_dp_in>;
};

&mdss_dp0_phy {
	vdda-phy-supply = <&vreg_l5a>;
	vdda-pll-supply = <&vreg_l4a>;

	status = "okay";
};

&pcie0 {
	pinctrl-0 = <&pcie0_default_state>;
	pinctrl-names = "default";

	status = "okay";
};

&pcie0_phy {
	vdda-phy-supply = <&vreg_l6a>;
	vdda-pll-supply = <&vreg_l5a>;

	status = "okay";
};

&pcie1 {
	pinctrl-0 = <&pcie1_default_state>;
	pinctrl-names = "default";

	status = "okay";
};

&pcie1_phy {
	vdda-phy-supply = <&vreg_l6a>;
	vdda-pll-supply = <&vreg_l5a>;

	status = "okay";
};

&pcieport0 {
	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};

&pcieport1 {
	reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
};

&pmm8620au_0_gpios {
	usb2_id: usb2-id-state {
		pins = "gpio9";
		function = "normal";
		input-enable;
		bias-pull-up;
		power-source = <0>;
	};
};

&qup_i2c0_data_clk {
	drive-strength = <2>;
	bias-pull-up;
};

&qupv3_id_0 {
	firmware-name = "qcom/qcs8300/qupv3fw.elf";
	status = "okay";
};

&qupv3_id_1 {
	firmware-name = "qcom/qcs8300/qupv3fw.elf";
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/qcs8300/adsp.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/qcs8300/cdsp0.mbn";

	status = "okay";
};

&remoteproc_gpdsp {
	firmware-name = "qcom/qcs8300/gpdsp0.mbn";

	status = "okay";
};

&sdhc_1 {
	vmmc-supply = <&vreg_l8a>;
	vqmmc-supply = <&vreg_s2s>;

	no-sd;
	no-sdio;
	non-removable;

	status = "okay";
};

&serdes0 {
	phy-supply = <&vreg_l4a>;

	status = "okay";
};

&spi10 {
	status = "okay";

	tpm@0 {
		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
		reg = <0>;
		spi-max-frequency = <20000000>;
	};
};

&tlmm {
	pcie0_default_state: pcie0-default-state {
		wake-pins {
			pins = "gpio0";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		clkreq-pins {
			pins = "gpio1";
			function = "pcie0_clkreq";
			drive-strength = <2>;
			bias-pull-up;
		};

		perst-pins {
			pins = "gpio2";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	ethernet0_default: ethernet0-default-state {
		ethernet0_mdc: ethernet0-mdc-pins {
			pins = "gpio5";
			function = "emac0_mdc";
			drive-strength = <16>;
			bias-pull-up;
		};

		ethernet0_mdio: ethernet0-mdio-pins {
			pins = "gpio6";
			function = "emac0_mdio";
			drive-strength = <16>;
			bias-pull-up;
		};
	};

	expander5_int: expander5-int-state {
		pins = "gpio3";
		function = "gpio";
		bias-pull-up;
	};

	expander1_int: expander1-int-state {
		pins = "gpio16";
		function = "gpio";
		bias-pull-up;
	};

	qup_i2c1_default: qup-i2c1-state {
		pins = "gpio19", "gpio20";
		function = "qup0_se1";
		drive-strength = <2>;
		bias-pull-up;
	};

	pcie1_default_state: pcie1-default-state {
		wake-pins {
			pins = "gpio21";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		clkreq-pins {
			pins = "gpio22";
			function = "pcie1_clkreq";
			drive-strength = <2>;
			bias-pull-up;
		};

		perst-pins {
			pins = "gpio23";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	expander3_int: expander3-int-state {
		pins = "gpio24";
		function = "gpio";
		bias-pull-up;
	};

	expander6_int:  expander6-int-state {
		pins = "gpio52";
		function = "gpio";
		bias-pull-up;
	};

	expander0_int: expander0-int-state {
		pins = "gpio56";
		function = "gpio";
		bias-pull-up;
	};

	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
		pins = "gpio73";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state {
		pins = "gpio74";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state {
		pins = "gpio75";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	qup_i2c15_default: qup-i2c15-state {
		pins = "gpio91", "gpio92";
		function = "qup1_se7";
		drive-strength = <2>;
		bias-pull-up;
	};

	expander2_int: expander2-int-state {
		pins = "gpio95";
		function = "gpio";
		bias-pull-up;
	};

	expander4_int: expander4-int-state {
		pins = "gpio96";
		function = "gpio";
		bias-pull-up;
	};
};

&uart6 {
	status = "okay";
};

&uart7 {
	status = "okay";
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
	vcc-supply = <&vreg_l8a>;
	vcc-max-microamp = <1100000>;
	vccq-supply = <&vreg_l4c>;
	vccq-max-microamp = <1200000>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l4a>;
	vdda-pll-supply = <&vreg_l5a>;

	status = "okay";
};

&usb_1 {
	dr_mode = "peripheral";

	status = "okay";
};

&usb_1_hsphy {
	vdda-pll-supply = <&vreg_l7a>;
	vdda18-supply = <&vreg_l7c>;
	vdda33-supply = <&vreg_l9a>;

	status = "okay";
};

&usb_qmpphy {
	vdda-phy-supply = <&vreg_l7a>;
	vdda-pll-supply = <&vreg_l5a>;

	status = "okay";
};

&usb_2 {
	status = "okay";
};

&usb_2_dwc3_hs {
	remote-endpoint = <&usb2_con_hs_ep>;
};

&usb_2_hsphy {
	vdda-pll-supply = <&vreg_l7a>;
	vdda18-supply = <&vreg_l7c>;
	vdda33-supply = <&vreg_l9a>;

	status = "okay";
};