Marvell Orion SoC interrupt controllers

* Main interrupt controller

Required properties:
- compatible: shall be "marvell,orion-intc"
- reg: base address(es) of interrupt registers starting with CAUSE register
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1

The interrupt sources map to the corresponding bits in the interrupt
registers, i.e.
- 0 maps to bit 0 of first base address,
- 1 maps to bit 1 of first base address,
- 32 maps to bit 0 of second base address, and so on.

Example:
	intc: interrupt-controller {
		compatible = "marvell,orion-intc";
		interrupt-controller;
		#interrupt-cells = <1>;
		 /* Dove has 64 first level interrupts */
		reg = <0x20200 0x10>, <0x20210 0x10>;
	};

* Bridge interrupt controller

Required properties:
- compatible: shall be "marvell,orion-bridge-intc"
- reg: base address of bridge interrupt registers starting with CAUSE register
- interrupts: bridge interrupt of the main interrupt controller
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1

Optional properties:
- marvell,#interrupts: number of interrupts provided by bridge interrupt
      controller, defaults to 32 if not set

Example:
	bridge_intc: interrupt-controller {
		compatible = "marvell,orion-bridge-intc";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0x20110 0x8>;
		interrupts = <0>;
		/* Dove bridge provides 5 interrupts */
		marvell,#interrupts = <5>;
	};