// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/spmi/spmi.h>
#include "qcom-adc5-gen3.h"
/ {
thermal-zones {
pm8775-mbg0-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmm8620au_0_mbg_temp>;
trips {
trip0 {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
pm8775-mbg1-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmm8620au_1_mbg_temp>;
trips {
trip0 {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
};
};
&spmi_bus {
pmm8620au_0: pmic@0 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmm8620au_0_rtc: rtc@6100 {
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
};
pmm8620au_0_adc: adc@8000 {
compatible = "qcom,spmi-adc5-gen3";
reg = <0x8000>;
interrupts-extended = <&spmi_bus 0x0 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
channel@3 {
reg = <ADC5_GEN3_DIE_TEMP(0)>;
label = "pmm8620au_0_die_temp";
qcom,pre-scaling = <1 1>;
};
channel@8e {
reg = <ADC5_GEN3_VPH_PWR(0)>;
label = "pmm8620au_0_vph_pwr";
qcom,pre-scaling = <1 3>;
};
};
pmm8620au_0_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmm8620au_sail_0: pmic@1 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmm8620au_0_mbg_temp: temperature-sensor@d700 {
compatible = "qcom,pm8775-mbg-tm";
reg = <0xd700>;
io-channels = <&pmm8620au_0_adc ADC5_GEN3_DIE_TEMP(0)>;
io-channel-names = "thermal";
interrupts-extended = <&spmi_bus 0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
};
};
pmm8650au_1: pmic@2 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmm8650au_1_adc: adc@8000 {
compatible = "qcom,spmi-adc5-gen3";
reg = <0x8000>;
interrupts-extended = <&spmi_bus 0x2 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
channel@203 {
reg = <ADC5_GEN3_DIE_TEMP(2)>;
label = "pmm8650au_1_die_temp";
qcom,pre-scaling = <1 1>;
};
channel@28e {
reg = <ADC5_GEN3_VPH_PWR(2)>;
label = "pmm8650au_1_vph_pwr";
qcom,pre-scaling = <1 3>;
};
};
pmm8650au_1_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmm8620au_sail_1: pmic@3 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmm8620au_1_mbg_temp: temperature-sensor@d700 {
compatible = "qcom,pm8775-mbg-tm";
reg = <0xd700>;
io-channels = <&pmm8650au_1_adc ADC5_GEN3_DIE_TEMP(2)>;
io-channel-names = "thermal";
interrupts-extended = <&spmi_bus 0x3 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
};
};
};