// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
/delete-node/ &cdsp_mem;
/delete-node/ &gpu_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &ipa_gsi_mem;
/delete-node/ &mpss_mem;
/delete-node/ &slpi_mem;
/delete-node/ &spss_mem;
/delete-node/ &venus_mem;
/ {
qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
qcom,board-id = <8 0>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
/* Griffin BL initializes in 2.5k mode, not 4k */
width = <1096>;
height = <2560>;
stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's (going to be) a lot of clocks, but it's necessary due
* to unused clk cleanup & no panel driver yet (& no dispcc either)..
*/
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
key-camera-focus {
label = "Camera Focus";
linux,code = <KEY_CAMERA_FOCUS>;
gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-camera-snapshot {
label = "Camera Snapshot";
linux,code = <KEY_CAMERA>;
gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
cam0_vdig_vreg: cam0-vdig-regulator {
compatible = "regulator-fixed";
regulator-name = "camera0_vdig_vreg";
gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&main_cam_pwr_en>;
pinctrl-names = "default";
};
cam1_vdig_vreg: cam1-vdig-regulator {
compatible = "regulator-fixed";
regulator-name = "camera1_vdig_vreg";
gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&sub_cam_pwr_en>;
pinctrl-names = "default";
};
cam2_vdig_vreg: cam2-vdig-regulator {
compatible = "regulator-fixed";
regulator-name = "camera2_vdig_vreg";
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&chat_cam_pwr_en>;
pinctrl-names = "default";
};
cam3_vdig_vreg: cam3-vdig-regulator {
compatible = "regulator-fixed";
regulator-name = "camera3_vdig_vreg";
gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&supwc_pwr_en>;
pinctrl-names = "default";
};
cam_vmdr_vreg: cam-vmdr-regulator {
compatible = "regulator-fixed";
regulator-name = "camera_vmdr_vreg";
gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&main_cam_pwr_vmdr_en>;
pinctrl-names = "default";
};
rgbcir_vreg: rgbcir-regulator {
compatible = "regulator-fixed";
regulator-name = "rgbcir_vreg";
gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rgbc_ir_pwr_en>;
pinctrl-names = "default";
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
/*
* Apparently RPMh does not provide support for PM8150 S4 because it
* is always-on; model it as a fixed regulator.
*/
vreg_s4a_1p8: pm8150-s4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
reserved-memory {
mpss_mem: memory@8dc00000 {
reg = <0x0 0x8dc00000 0x0 0x9600000>;
no-map;
};
venus_mem: memory@97200000 {
reg = <0x0 0x97200000 0x0 0x500000>;
no-map;
};
slpi_mem: memory@97700000 {
reg = <0x0 0x97700000 0x0 0x1400000>;
no-map;
};
ipa_fw_mem: memory@98b00000 {
reg = <0x0 0x98b00000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@98b10000 {
reg = <0x0 0x98b10000 0x0 0x5000>;
no-map;
};
gpu_mem: memory@98b15000 {
reg = <0x0 0x98b15000 0x0 0x2000>;
no-map;
};
spss_mem: memory@98c00000 {
reg = <0x0 0x98c00000 0x0 0x100000>;
no-map;
};
cdsp_mem: memory@98d00000 {
reg = <0x0 0x98d00000 0x0 0x1400000>;
no-map;
};
cont_splash_mem: memory@9c000000 {
reg = <0x0 0x9c000000 0x0 0x2400000>;
no-map;
};
cdsp_sec_mem: memory@a4c00000 {
reg = <0x0 0xa4c00000 0x0 0x3c00000>;
no-map;
};
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
pmsg-size = <0x20000>;
ecc-size = <16>;
no-map;
};
};
};
&adsp_mem {
reg = <0x0 0x8be00000 0x0 0x1e00000>;
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
vdd-l2-l10-supply = <&vreg_bob>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
vdd-l13-l16-l17-supply = <&vreg_bob>;
vreg_s2a_0p6: smps2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5a_1p9: smps5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2040000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6a_0p9: smps6 {
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1a_0p75: ldo1 {
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <752000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a_3p1: ldo2 {
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p8: ldo3 {
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <932000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a_0p875: ldo5 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_1p2: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_1p2: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_2p5: ldo10 {
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L13 is unused. */
vreg_l14a_1p8: ldo14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p7: ldo15 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p0: ldo17 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_0p8: ldo18 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
vdd-l4-l5-l6-supply = <&vreg_bob>;
vdd-l7-l11-supply = <&vreg_bob>;
vdd-l9-l10-supply = <&vreg_bob>;
vdd-bob-supply = <&vph_pwr>;
vdd-flash-supply = <&vreg_bob>;
vdd-rgb-supply = <&vreg_bob>;
vreg_bob: bob {
regulator-min-microvolt = <3350000>;
regulator-max-microvolt = <4000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
regulator-allow-bypass;
};
vreg_s1c_1p1: smps1 {
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s8c_1p3: smps8 {
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p8: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p3: ldo2 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8: ldo4 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p8: ldo5 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p9: ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
/* PM8009 is not present on these boards, even if downstream sources suggest so. */
};
&i2c4 {
status = "okay";
/* Qcom SMB1355 @ c */
/* Qcom SMB1390 @ 10 */
/* Qcom FSA4480 USB-C audio switch @ 43 */
nfc@28 {
compatible = "nxp,nxp-nci-i2c";
reg = <0x28>;
interrupt-parent = <&tlmm>;
interrupts = <47 IRQ_TYPE_EDGE_RISING>;
enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
};
};
&i2c7 {
status = "okay";
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&i2c10 {
status = "okay";
/* Samsung touchscreen @ 48 */
};
&pm8150_gpios {
gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
"",
"NC",
"NC",
"",
"NC",
"SUPWC_PWR_EN",
"",
"NC",
"NC"; /* GPIO_10 */
vol_down_n: vol-down-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
supwc_pwr_en: supwc-pwr-en-state {
pins = "gpio7";
function = "normal";
qcom,drive-strength = <1>;
power-source = <1>;
drive-push-pull;
output-low;
};
};
&pm8150b_gpios {
gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
"FOCUS_N",
"NC",
"NC",
"RF_LCD_ID_EN",
"NC",
"TS_VDDH_EN",
"LCD_ID",
"",
"NC", /* GPIO_10 */
"NC",
"RF_ID";
snapshot_n: snapshot-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
focus_n: focus-n-state {
pins = "gpio2";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pm8150l_gpios {
gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */
"NC",
"MAIN_CAM_PWR_VMDR_EN",
"NC",
"",
"NC",
"NC",
"FP_LDO_EN",
"NC",
"NC", /* GPIO_10 */
"NC",
"NC";
main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state {
pins = "gpio3";
function = "normal";
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
power-source = <0>;
drive-push-pull;
output-low;
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEUP>;
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&sdhc_2 {
vmmc-supply = <&vreg_l9c_2p9>;
vqmmc-supply = <&vreg_l6c_2p9>;
cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
no-sdio;
no-mmc;
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <126 4>;
gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */
"NFC_ESE_SPI_MOSI",
"NFC_ESE_SPI_SCLK",
"NFC_ESE_SPI_CS_N",
"NC",
"NC",
"DISP_RESET_N",
"DEBUG_GPIO0",
"MDP_VSYNC_P",
"TS_I2C_SDA",
"TS_I2C_SCL", /* GPIO_10 */
"CAM_SOF",
"CAM2_RST_N",
"CAM_MCLK0",
"CAM_MCLK1",
"CAM_MCLK2",
"CAM_MCLK3",
"CCI_I2C_SDA0",
"CCI_I2C_SCL0",
"CCI_I2C_SDA1",
"CCI_I2C_SCL1", /* GPIO_20 */
"NC",
"MAIN_CAM_PWR_EN",
"CAM3_RST_N",
"NC",
"CHAT_CAM_PWR_EN",
"NC",
"NC",
"CAM0_RST_N",
"RGBC_IR_PWR_EN",
"CAM1_RST_N", /* GPIO_30 */
"CCI_I2C_SDA2",
"CCI_I2C_SCL2",
"CCI_I2C_SDA3",
"CCI_I2C_SCL3",
"NC",
"DEBUG_GPIO1",
"RGBC_IR_INT",
"USB_CC_DIR",
"NC",
"NC", /* GPIO_40 */
"NFC_EN",
"NFC_ESE_PWR_REQ",
"BT_HCI_UART_CTS_N",
"BT_HCI_UART_RFR_N",
"BT_HCI_UART_TXD",
"BT_HCI_UART_RXD",
"NFC_IRQ",
"NFC_DWL_REQ",
"UIM2_DETECT_EN",
"WLAN_SW_CTRL", /* GPIO_50 */
"APPS_I2C_SDA",
"APPS_I2C_SCL",
"NC",
"TS_RESET_N",
"NC",
"NC",
"NC",
"NC",
"HW_ID_0",
"NC", /* GPIO_60 */
"QLINK_REQUEST",
"QLINK_ENABLE",
"WMSS_RESET_N",
"SDM_GRFC_8",
"WDOG_DISABLE",
"NC",
"NC",
"PA_INDICATOR_OR",
"MSS_LTE_COXM_TXD",
"MSS_LTE_COXM_RXD", /* GPIO_70 */
"SDM_RFFE0_DATA",
"SDM_RFFE0_CLK",
"SDM_RFFE1_DATA",
"SDM_RFFE1_CLK",
"SDM_RFFE2_DATA",
"SDM_RFFE2_CLK",
"SDM_RFFE3_DATA",
"SDM_RFFE3_CLK",
"SUB_CAM_PWR_EN",
"FP_RESET_N", /* GPIO_80 */
"NC",
"NC",
"NC",
"NC",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"DVDT_WRT_DET_AND",
"NC",
"NC",
"NC", /* GPIO_90 */
"NC",
"NC",
"NC",
"NC",
"UDON_SWITCH_SEL",
"SD_CARD_DET_N",
"NC",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"USB_AUDIO_EN1", /* GPIO_100 */
"DISP_ERR_FG",
"NC",
"NC",
"NC",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_DET",
"UIM1_DATA",
"UIM1_CLK", /* GPIO_110 */
"UIM1_RESET",
"UIM1_PRESENT",
"NFC_CLK_REQ",
"SW_SERVICE",
"NC",
"RF_ID_EXTENSION",
"ALS_PROX_INT_N",
"FP_INT",
"DVDT_WRT_DET_OR",
"BAROMETER_INT", /* GPIO_120 */
"ACC_COVER_OPEN",
"TS_INT_N",
"CODEC_INT1_N",
"CODEC_INT2_N",
"TX_GTR_THRES_IN",
"FP_SPI_MISO",
"FP_SPI_MOSI",
"FP_SPI_SCLK",
"FP_SPI_CS_N",
"NC", /* GPIO_130 */
"DVDT_ENABLE",
"ACCEL_INT",
"NC",
"MAG_INT_N",
"NC",
"FORCED_USB_BOOT",
"NC",
"NC",
"HW_ID_1",
"NC", /* GPIO_140 */
"NC",
"NC",
"CODEC_RST_N",
"CDC_SPI_MISO",
"CDC_SPI_MOSI",
"CDC_SPI_SCLK",
"CDC_SPI_CS_N",
"NC",
"LPASS_SLIMBUS_CLK",
"LPASS_SLIMBUS_DATA0", /* GPIO_150 */
"LPASS_SLIMBUS_DATA1",
"USB_AUDIO_EN2",
"BT_FM_SLIMBUS_DATA",
"BT_FM_SLIMBUS_CLK",
"COMPASS_I2C_SDA",
"COMPASS_I2C_SCL",
"SSC_SPI_1_MISO",
"SSC_SPI_1_MOSI",
"SSC_SPI_1_CLK",
"SSC_SPI_1_CS_N", /* GPIO_160 */
"SSC_SENSOR_I2C_SDA",
"SSC_SENSOR_I2C_SCL",
"NC",
"NC",
"NC",
"NC",
"SSC_UART_1_TX",
"SSC_UART_1_RX",
"WL_CMD_CLK_CHAIN0",
"WL_CMD_DATA_CHAIN0", /* GPIO_170 */
"WL_CMD_CLK_CHAIN1",
"WL_CMD_DATA_CHAIN1",
"WL_BT_COEX_CLK",
"WL_BT_COEX_DATA";
main_cam_pwr_en: main-cam-pwr-en-state {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
chat_cam_pwr_en: chat-cam-pwr-en-state {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
pins = "gpio29";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
sub_cam_pwr_en: sub-cam-pwr-en-state {
pins = "gpio79";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
&uart2 {
status = "okay";
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5a_0p875>;
vdda33-supply = <&vreg_l2a_3p1>;
vdda18-supply = <&vreg_l12a_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vreg_l18a_0p8>;
};