# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ST-Ericsson DMA40 DMA Engine
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
allOf:
- $ref: dma-controller.yaml#
properties:
"#dma-cells":
const: 3
description: |
The first cell is the unique device channel number as indicated by this
table for DB8500 which is the only ASIC known to use DMA40:
0: SPI controller 0
1: SD/MMC controller 0 (unused)
2: SD/MMC controller 1 (unused)
3: SD/MMC controller 2 (unused)
4: I2C port 1
5: I2C port 3
6: I2C port 2
7: I2C port 4
8: Synchronous Serial Port SSP0
9: Synchronous Serial Port SSP1
10: Multi-Channel Display Engine MCDE RX
11: UART port 2
12: UART port 1
13: UART port 0
14: Multirate Serial Port MSP2
15: I2C port 0
16: USB OTG in/out endpoints 7 & 15
17: USB OTG in/out endpoints 6 & 14
18: USB OTG in/out endpoints 5 & 13
19: USB OTG in/out endpoints 4 & 12
20: SLIMbus or HSI channel 0
21: SLIMbus or HSI channel 1
22: SLIMbus or HSI channel 2
23: SLIMbus or HSI channel 3
24: Multimedia DSP SXA0
25: Multimedia DSP SXA1
26: Multimedia DSP SXA2
27: Multimedia DSP SXA3
28: SD/MMC controller 2
29: SD/MMC controller 0
30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
31: MSP port 0 or SLIMbus channel 0
32: SD/MMC controller 1
33: SPI controller 2
34: i2c3 RX2 TX2
35: SPI controller 1
36: USB OTG in/out endpoints 3 & 11
37: USB OTG in/out endpoints 2 & 10
38: USB OTG in/out endpoints 1 & 9
39: USB OTG in/out endpoints 8
40: SPI controller 3
41: SD/MMC controller 3
42: SD/MMC controller 4
43: SD/MMC controller 5
44: Multimedia DSP SXA4
45: Multimedia DSP SXA5
46: SLIMbus channel 8 or Multimedia DSP SXA6
47: SLIMbus channel 9 or Multimedia DSP SXA7
48: Crypto Accelerator 1
49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
50: Hash Accelerator 1 TX
51: memcpy TX (to be used by the DMA driver for memcpy operations)
52: SLIMbus or HSI channel 4
53: SLIMbus or HSI channel 5
54: SLIMbus or HSI channel 6
55: SLIMbus or HSI channel 7
56: memcpy (to be used by the DMA driver for memcpy operations)
57: memcpy (to be used by the DMA driver for memcpy operations)
58: memcpy (to be used by the DMA driver for memcpy operations)
59: memcpy (to be used by the DMA driver for memcpy operations)
60: memcpy (to be used by the DMA driver for memcpy operations)
61: Crypto Accelerator 0
62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
63: Hash Accelerator 0 TX
The second cell is the DMA request line number. This is only used when
a fixed channel is allocated, and indicated by setting bit 3 in the
flags field (see below).
The third cell is a 32bit flags bitfield with the following possible
bits set:
0x00000001 (bit 0) - mode:
Logical channel when unset
Physical channel when set
0x00000002 (bit 1) - direction:
Memory to Device when unset
Device to Memory when set
0x00000004 (bit 2) - endianness:
Little endian when unset
Big endian when set
0x00000008 (bit 3) - use fixed channel:
Use automatic channel selection when unset
Use DMA request line number when set
0x00000010 (bit 4) - set channel as high priority:
Normal priority when unset
High priority when set
compatible:
items:
- const: stericsson,db8500-dma40
- const: stericsson,dma40
reg:
oneOf:
- items:
- description: DMA40 memory base
- items:
- description: DMA40 memory base
- description: LCPA memory base, deprecated, use eSRAM pool instead
deprecated: true
reg-names:
oneOf:
- items:
- const: base
- items:
- const: base
- const: lcpa
deprecated: true
interrupts:
maxItems: 1
clocks:
maxItems: 1
sram:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: A phandle array with inner size 1 (no arg cells).
First phandle is the LCPA (Logical Channel Parameter Address) memory.
Second phandle is the LCLA (Logical Channel Link base Address) memory.
maxItems: 2
items:
maxItems: 1
memcpy-channels:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Array of u32 elements indicating which channels on the DMA
engine are eligible for memcpy transfers
required:
- "#dma-cells"
- compatible
- reg
- interrupts
- clocks
- sram
- memcpy-channels
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mfd/dbx500-prcmu.h>
dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801c0000 0x1000>;
reg-names = "base";
sram = <&lcpa>, <&lcla>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <3>;
memcpy-channels = <56 57 58 59 60>;
clocks = <&prcmu_clk PRCMU_DMACLK>;
};
...