# SPDX-License-Identifier: GPL-2.0-only menuconfig MACINTOSH_DRIVERS bool "Macintosh device drivers" depends on PPC || MAC || X86 default y if (PPC_PMAC || MAC) help Say Y here to get to see options for devices used with Macintosh computers. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if MACINTOSH_DRIVERS config ADB bool "Apple Desktop Bus (ADB) support" depends on MAC || (PPC_PMAC && PPC32) help Apple Desktop Bus (ADB) support is for support of devices which are connected to an ADB port. ADB devices tend to have 4 pins. If you have an Apple Macintosh prior to the iMac, an iBook or PowerBook, or a "Blue and White G3", you probably want to say Y here. Otherwise say N. config ADB_MACII bool "Include Mac II ADB driver" depends on ADB && MAC help Say Y here if want your kernel to support Macintosh systems that use the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and Centris 650. config ADB_IOP bool "Include IOP (IIfx/Quadra 9x0) ADB driver" depends on ADB && MAC help The I/O Processor (IOP) is an Apple custom IC designed to provide intelligent support for I/O controllers. It is described at <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct support for it, say 'Y' here. # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU config ADB_CUDA bool "Support for Cuda/Egret based Macs and PowerMacs" depends on (ADB || PPC_PMAC) && !PPC_PMAC64 select RTC_LIB help This provides support for Cuda/Egret based Macintosh and Power Macintosh systems. This includes most m68k based Macs, most Old World PowerMacs, the first generation iMacs, the Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later models should use CONFIG_ADB_PMU instead. It is safe to say Y here even if your machine doesn't have a Cuda or Egret device. If unsure say Y. config ADB_PMU bool "Support for PMU based PowerMacs and PowerBooks" depends on PPC_PMAC || MAC select RTC_LIB help On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the PMU is an embedded microprocessor whose primary function is to control system power, and battery charging on the portable models. The PMU also controls the ADB (Apple Desktop Bus) which connects to the keyboard and mouse on some machines, as well as the non-volatile RAM and the RTC (real time clock) chip. Say Y to enable support for this device; you should do so if your machine is one of those mentioned above. config ADB_PMU_EVENT def_bool y depends on ADB_PMU && INPUT=y config ADB_PMU_LED bool "Support for the Power/iBook front LED" depends on PPC_PMAC && ADB_PMU select NEW_LEDS select LEDS_CLASS help Support the front LED on Power/iBooks as a generic LED that can be triggered by any of the supported triggers. To get the behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this and the disk LED trigger and configure appropriately through sysfs. config ADB_PMU_LED_DISK bool "Use front LED as DISK LED by default" depends on ATA depends on ADB_PMU_LED depends on LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_DISK help This option makes the front LED default to the disk trigger so that it blinks on disk activity. config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 help This option adds support for the newer G5 iMacs and PowerMacs based on the "SMU" system control chip which replaces the old PMU. If you don't know, say Y. config PMAC_APM_EMU tristate "APM emulation" select APM_EMULATION depends on ADB_PMU && PM && PPC32 config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" depends on PPC_PMAC && PPC32 && BLOCK help This option adds support for older PowerBook's hotswap media bay that can contains batteries, floppy drives, or IDE devices. PCI devices are not fully supported in the bay as I never had one to try with config PMAC_BACKLIGHT bool "Backlight control for LCD screens" depends on PPC_PMAC && ADB_PMU && FB = y && (BROKEN || !PPC64) select FB_BACKLIGHT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older PowerBooks will be enabled so you can change the screen brightness. Newer models should use a userspace daemon like pbbuttonsd. config PMAC_BACKLIGHT_LEGACY bool "Provide legacy ioctl's on /dev/pmu for the backlight" depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) help Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for programs which use this old interface. New and updated programs should use the backlight classes in sysfs. config ADB_MACIO bool "Include MacIO (CHRP) ADB driver" depends on ADB && PPC_CHRP && !PPC_PMAC64 help Say Y here to include direct support for the ADB controller in the Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra also includes a MESH II SCSI controller, DBDMA controller, VIA chip, OpenPIC controller and two RS422/Geoports.) config INPUT_ADBHID bool "Support for ADB input devices (keyboard, mice, ...)" depends on ADB && INPUT=y help Say Y here if you want to have ADB (Apple Desktop Bus) HID devices such as keyboards, mice, joysticks, trackpads or graphic tablets handled by the input layer. If you say Y here, make sure to say Y to the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface support" (CONFIG_INPUT_EVDEV) as well. If unsure, say Y. config MAC_EMUMOUSEBTN tristate "Support for mouse button 2+3 emulation" depends on SYSCTL && INPUT help This provides generic support for emulating the 2nd and 3rd mouse button with keypresses. If you say Y here, the emulation is still disabled by default. The emulation is controlled by these sysctl entries: /proc/sys/dev/mac_hid/mouse_button_emulation /proc/sys/dev/mac_hid/mouse_button2_keycode /proc/sys/dev/mac_hid/mouse_button3_keycode If you have an Apple machine with a 1-button mouse, say Y here. To compile this driver as a module, choose M here: the module will be called mac_hid. config THERM_WINDTUNNEL tristate "Support for thermal management on Windtunnel G4s" depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the desktop G4 "Windtunnel" config THERM_ADT746X tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the iBook G4, and the ATI based aluminium PowerBooks, allowing slightly better fan behaviour by default, and some manual control. config WINDFARM tristate "New PowerMac thermal control infrastructure" depends on PPC config WINDFARM_PM81 tristate "Support for thermal management on iMac G5" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the iMacG5 config WINDFARM_PM72 tristate "Support for thermal management on PowerMac G5 (AGP)" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac G5 "AGP" variants (PowerMac 7,2 and 7,3) config WINDFARM_RM31 tristate "Support for thermal management on Xserve G5" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU select I2C_POWERMAC help This driver provides thermal control for the Xserve G5 (RackMac3,1) config WINDFARM_PM91 tristate "Support for thermal management on PowerMac9,1" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac9,1 which is the recent (SMU based) single CPU desktop G5 config WINDFARM_PM112 tristate "Support for thermal management on PowerMac11,2" depends on WINDFARM && I2C && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac11,2 which are the recent dual and quad G5 machines using the 970MP dual-core processor. config WINDFARM_PM121 tristate "Support for thermal management on PowerMac12,1" depends on WINDFARM && I2C && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac12,1 which is the iMac G5 (iSight). config ANSLCD tristate "Support for ANS LCD display" depends on ADB_CUDA && PPC_PMAC config PMAC_RACKMETER tristate "Support for Apple XServe front panel LEDs" depends on PPC_PMAC help This driver provides some support to control the front panel blue LEDs "vu-meter" of the XServer macs. config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) help Support for the motion sensor included in PowerBooks. Includes implementations for PMU and I2C. This driver can also be built as a module. If so, the module will be called ams. config SENSORS_AMS_PMU bool "PMU variant" depends on SENSORS_AMS && ADB_PMU default y help PMU variant of motion sensor, found in late 2005 PowerBooks. config SENSORS_AMS_I2C bool "I2C variant" depends on SENSORS_AMS && I2C default y help I2C variant of motion sensor, found in early 2005 PowerBooks and iBooks. endif # MACINTOSH_DRIVERS