// SPDX-License-Identifier: GPL-2.0 /* * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * * based on r8a7779 * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman */ /dts-v1/; #include "r8a7778.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> / { model = "bockw"; compatible = "renesas,bockw", "renesas,r8a7778"; aliases { serial0 = &scif0; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; memory@60000000 { device_type = "memory"; reg = <0x60000000 0x10000000>; }; fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sound { compatible = "simple-audio-card"; simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcodec>; simple-audio-card,frame-master = <&sndcodec>; sndcpu: simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; system-clock-frequency = <11289600>; }; }; }; &bsc { ethernet@18300000 { compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18300000 0x1000>; phy-mode = "mii"; interrupt-parent = <&irqpin>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; }; &extal_clk { clock-frequency = <33333333>; }; &i2c0 { status = "okay"; ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; }; camera@41 { compatible = "oki,ml86v7667"; reg = <0x41>; }; camera@43 { compatible = "oki,ml86v7667"; reg = <0x43>; }; rx8581: rtc@51 { compatible = "epson,rx8581"; reg = <0x51>; }; }; &mmcif { pinctrl-0 = <&mmc_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; bus-width = <8>; broken-cd; status = "okay"; }; &irqpin { status = "okay"; }; &tmu0 { status = "okay"; }; &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; scif0_pins: scif0 { groups = "scif0_data_a", "scif0_ctrl"; function = "scif0"; }; scif_clk_pins: scif_clk { groups = "scif_clk"; function = "scif_clk"; }; mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl"; function = "mmc"; }; sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; }; sdhi0_pup_pins: sd0_pup { groups = "sdhi0_cd", "sdhi0_wp"; function = "sdhi0"; bias-pull-up; }; hspi0_pins: hspi0 { groups = "hspi0_a"; function = "hspi0"; }; usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; usb1_pins: usb1 { groups = "usb1"; function = "usb1"; }; vin0_pins: vin0 { groups = "vin0_data8", "vin0_clk"; function = "vin0"; }; vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; }; }; &rcar_sound { /* Single DAI */ #sound-dai-cells = <0>; }; &sdhi0 { pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; bus-width = <4>; status = "okay"; wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; }; &hspi0 { pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; flash: flash@0 { compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "data(spi)"; reg = <0x00000000 0x00100000>; }; }; }; }; &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; uart-has-rtscts; status = "okay"; }; &scif_clk { clock-frequency = <14745600>; };