// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) Toradex
*
* Toradex Capacitive Touch Display 10.1" LVDS V2 on the Verdin AM62 Mezzanine
* LVDS interface (J10), used with the Verdin Development Board.
*
* https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
* https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
&{/} {
backlight_pwm2: backlight-pwm2 {
compatible = "pwm-backlight";
brightness-levels = <0 45 63 88 119 158 203 255>;
default-brightness-level = <4>;
/* Verdin GPIO_4 (SODIMM 212) - LVDS_BKL_EN */
enable-gpios = <&mcu_gpio0 4 GPIO_ACTIVE_HIGH>;
/* Verdin PWM_2 (SODIMM 16) - LVDS_PWM */
pwms = <&epwm0 1 6666667 0>;
};
panel-lvds-native {
compatible = "optologic,scx1001511ggc49", "panel-lvds";
backlight = <&backlight_pwm2>;
data-mapping = "vesa-24";
height-mm = <136>;
width-mm = <217>;
panel-timing {
clock-frequency = <64500000>;
hactive = <1280>;
hback-porch = <20>;
hfront-porch = <20>;
hsync-len = <2>;
vactive = <800>;
vback-porch = <5>;
vfront-porch = <5>;
vsync-len = <3>;
de-active = <1>;
hsync-active = <0>;
vsync-active = <0>;
pixelclk-active = <0>;
};
port {
panel_lvds_native_in: endpoint {
remote-endpoint = <&oldi0_out>;
};
};
};
};
&dss {
status = "okay";
};
&dss_ports {
#address-cells = <1>;
#size-cells = <0>;
/* DSS VP1: internal DPI output to OLDIx */
port@0 {
reg = <0>;
dss0_out: endpoint {
remote-endpoint = <&oldi0_in>;
};
};
};
/* Verdin I2C_2_DSI */
&main_i2c2 {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@41 {
compatible = "ilitek,ili251x";
reg = <0x41>;
/* Verdin GPIO_3 (SODIMM 210) - LVDS_TOUCH_INT# */
interrupt-parent = <&mcu_gpio0>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
/* Verdin GPIO_2 (SODIMM 208) - LVDS_TOUCH_RST# */
reset-gpios = <&mcu_gpio0 2 GPIO_ACTIVE_LOW>;
};
};
&oldi0 {
status = "okay";
};
&oldi0_port0 {
oldi0_in: endpoint {
remote-endpoint = <&dss0_out>;
};
};
&oldi0_port1 {
oldi0_out: endpoint {
remote-endpoint = <&panel_lvds_native_in>;
};
};