# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm QMP USB4-USB3-DP PHY controller (SC8280XP)

maintainers:
  - Vinod Koul <vkoul@kernel.org>

description:
  The QMP PHY controller supports physical layer functionality for a number of
  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - qcom,maili-qmp-usb3-dp-phy
          - const: qcom,hawi-qmp-usb3-dp-phy
      - items:
          - enum:
              - qcom,eliza-qmp-usb3-dp-phy
          - const: qcom,sm8650-qmp-usb3-dp-phy
      - items:
          - enum:
              - qcom,kaanapali-qmp-usb3-dp-phy
          - const: qcom,sm8750-qmp-usb3-dp-phy
      - enum:
          - qcom,glymur-qmp-usb3-dp-phy
          - qcom,hawi-qmp-usb3-dp-phy
          - qcom,nord-qmp-usb3-dp-phy
          - qcom,sar2130p-qmp-usb3-dp-phy
          - qcom,sc7180-qmp-usb3-dp-phy
          - qcom,sc7280-qmp-usb3-dp-phy
          - qcom,sc8180x-qmp-usb3-dp-phy
          - qcom,sc8280xp-qmp-usb43dp-phy
          - qcom,sdm845-qmp-usb3-dp-phy
          - qcom,sm6350-qmp-usb3-dp-phy
          - qcom,sm8150-qmp-usb3-dp-phy
          - qcom,sm8250-qmp-usb3-dp-phy
          - qcom,sm8350-qmp-usb3-dp-phy
          - qcom,sm8450-qmp-usb3-dp-phy
          - qcom,sm8475-qmp-usb3-dp-phy
          - qcom,sm8550-qmp-usb3-dp-phy
          - qcom,sm8650-qmp-usb3-dp-phy
          - qcom,sm8750-qmp-usb3-dp-phy
          - qcom,x1e80100-qmp-usb3-dp-phy

  reg:
    maxItems: 1

  clocks:
    minItems: 4
    maxItems: 5

  clock-names:
    minItems: 4
    maxItems: 5

  power-domains:
    maxItems: 1

  resets:
    maxItems: 2

  reset-names:
    items:
      - const: phy
      - const: common

  vdda-phy-supply: true

  vdda-pll-supply: true

  refgen-supply: true

  "#clock-cells":
    const: 1
    description:
      See include/dt-bindings/phy/phy-qcom-qmp.h

  "#phy-cells":
    const: 1
    description:
      See include/dt-bindings/phy/phy-qcom-qmp.h

  mode-switch: true
  orientation-switch: true

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/$defs/port-base
        description: Output endpoint of the PHY
        unevaluatedProperties: false

        properties:
          endpoint:
            $ref: /schemas/graph.yaml#/$defs/endpoint-base
            unevaluatedProperties: false

          endpoint@0:
            $ref: /schemas/graph.yaml#/$defs/endpoint-base
            description: Display Port Output lanes of the PHY when used with static mapping,
                         The entry index is the DP lanes index, and the number is the PHY
                         signal in the order RX0, TX0, TX1, RX1.
            unevaluatedProperties: false

            properties:
              # Static lane mappings are mutually exclusive with typec-mux/orientation-mux
              data-lanes:
                $ref: /schemas/types.yaml#/definitions/uint32-array
                minItems: 2
                maxItems: 4
                oneOf:
                  - items: # DisplayPort 1 lane, normal orientation
                      - const: 3
                  - items: # DisplayPort 1 lane, flipped orientation
                      - const: 0
                  - items: # DisplayPort 2 lanes, normal orientation
                      - const: 3
                      - const: 2
                  - items: # DisplayPort 2 lanes, flipped orientation
                      - const: 0
                      - const: 1
                  - items: # DisplayPort 4 lanes, normal orientation
                      - const: 3
                      - const: 2
                      - const: 1
                      - const: 0
                  - items: # DisplayPort 4 lanes, flipped orientation
                      - const: 0
                      - const: 1
                      - const: 2
                      - const: 3
            required:
              - data-lanes

          endpoint@1:
            $ref: /schemas/graph.yaml#/$defs/endpoint-base
            description: USB Output lanes of the PHY when used with static mapping.
                         The entry index is the USB3 lane in the order TX then RX, and the
                         number is the PHY signal in the order RX0, TX0, TX1, RX1.
            unevaluatedProperties: false

            properties:
              # Static lane mappings are mutually exclusive with typec-mux/orientation-mux
              data-lanes:
                $ref: /schemas/types.yaml#/definitions/uint32-array
                minItems: 2
                oneOf:
                  - items: # USB3, normal orientation
                      - const: 1
                      - const: 0
                  - items: # USB3, flipped orientation
                      - const: 2
                      - const: 3

            required:
              - data-lanes

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: Incoming endpoint from the USB controller

      port@2:
        $ref: /schemas/graph.yaml#/properties/port
        description: Incoming endpoint from the DisplayPort controller

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - resets
  - reset-names
  - vdda-phy-supply
  - vdda-pll-supply
  - "#clock-cells"
  - "#phy-cells"

allOf:
  - $ref: /schemas/usb/usb-switch.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,x1e80100-qmp-usb3-dp-phy
    then:
      properties:
        clocks:
          maxItems: 5
        clock-names:
          items:
            - const: aux
            - const: ref
            - const: com_aux
            - const: usb3_pipe
            - const: p2rr2p_pipe

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,sc7180-qmp-usb3-dp-phy
              - qcom,sdm845-qmp-usb3-dp-phy
    then:
      properties:
        clocks:
          maxItems: 5
        clock-names:
          items:
            - const: aux
            - const: ref
            - const: com_aux
            - const: usb3_pipe
            - const: cfg_ahb

  - if:
      not:
        properties:
          compatible:
            contains:
              enum:
                - qcom,x1e80100-qmp-usb3-dp-phy
                - qcom,sc7180-qmp-usb3-dp-phy
                - qcom,sdm845-qmp-usb3-dp-phy
    then:
      properties:
        clocks:
          maxItems: 4
        clock-names:
          items:
            - const: aux
            - const: ref
            - const: com_aux
            - const: usb3_pipe

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,glymur-qmp-usb3-dp-phy
              - qcom,hawi-qmp-usb3-dp-phy
              - qcom,nord-qmp-usb3-dp-phy
              - qcom,sar2130p-qmp-usb3-dp-phy
              - qcom,sc8280xp-qmp-usb43dp-phy
              - qcom,sm6350-qmp-usb3-dp-phy
              - qcom,sm8550-qmp-usb3-dp-phy
              - qcom,sm8650-qmp-usb3-dp-phy
              - qcom,sm8750-qmp-usb3-dp-phy
              - qcom,x1e80100-qmp-usb3-dp-phy
    then:
      required:
        - power-domains
    else:
      properties:
        power-domains: false

  - if:
      properties:
        compatible:
          enum:
            - qcom,glymur-qmp-usb3-dp-phy
    then:
      required:
        - refgen-supply
    else:
      properties:
        refgen-supply: false

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>

    phy@88eb000 {
      compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
      reg = <0x088eb000 0x4000>;

      clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
               <&gcc GCC_USB4_EUD_CLKREF_CLK>,
               <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
               <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
      clock-names = "aux", "ref", "com_aux", "usb3_pipe";

      power-domains = <&gcc USB30_PRIM_GDSC>;

      resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
               <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
      reset-names = "phy", "common";

      vdda-phy-supply = <&vreg_l9d>;
      vdda-pll-supply = <&vreg_l4d>;

      orientation-switch;

      #clock-cells = <1>;
      #phy-cells = <1>;

      ports {
          #address-cells = <1>;
          #size-cells = <0>;

          port@0 {
              reg = <0>;

              endpoint {
                  remote-endpoint = <&typec_connector_ss>;
              };
          };

          port@1 {
              reg = <1>;

              endpoint {
                  remote-endpoint = <&dwc3_ss_out>;
              };
          };

          port@2 {
              reg = <2>;

              endpoint {
                  remote-endpoint = <&mdss_dp_out>;
              };
          };
      };
    };