=============================================================================
Freescale Frame Manager Device Bindings
CONTENTS
- FMan Node
- FMan Port Node
- FMan MURAM Node
- FMan dTSEC/XGEC/mEMAC Node
- FMan IEEE 1588 Node
- FMan MDIO Node
- Example
=============================================================================
FMan Node
DESCRIPTION
Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
etc.) the FMan node will have child nodes for each of them.
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: Must include "fsl,fman"
FMan version can be determined via FM_IP_REV_1 register in the
FMan block. The offset is 0xc4 from the beginning of the
Frame Processing Manager memory map (0xc3000 from the
beginning of the FMan node).
- cell-index
Usage: required
Value type: <u32>
Definition: Specifies the index of the FMan unit.
The cell-index value may be used by the SoC, to identify the
FMan unit in the SoC memory map. In the table below,
there's a description of the cell-index use in each SoC:
- P1023:
register[bit] FMan unit cell-index
============================================================
DEVDISR[1] 1 0
- P2041, P3041, P4080 P5020, P5040:
register[bit] FMan unit cell-index
============================================================
DCFG_DEVDISR2[6] 1 0
DCFG_DEVDISR2[14] 2 1
(Second FM available only in P4080 and P5040)
- B4860, T1040, T2080, T4240:
register[bit] FMan unit cell-index
============================================================
DCFG_CCSR_DEVDISR2[24] 1 0
DCFG_CCSR_DEVDISR2[25] 2 1
(Second FM available only in T4240)
DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
the specific SoC "Device Configuration/Pin Control" Memory
Map.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the offset of the
following configuration registers:
- BMI configuration registers.
- QMI configuration registers.
- DMA configuration registers.
- FPM configuration registers.
- FMan controller configuration registers.
- ranges
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property.
- clocks
Usage: required
Value type: <prop-encoded-array>
Definition: phandle for the fman input clock.
- clock-names
usage: required
Value type: <stringlist>
Definition: "fmanclk" for the fman input clock.
- interrupts
Usage: required
Value type: <prop-encoded-array>
Definition: A pair of IRQs are specified in this property.
The first element is associated with the event interrupts and
the second element is associated with the error interrupts.
- fsl,qman-channel-range
Usage: required
Value type: <prop-encoded-array>
Definition: Specifies the range of the available dedicated
channels in the FMan. The first cell specifies the beginning
of the range and the second cell specifies the number of
channels.
Further information available at:
"Work Queue (WQ) Channel Assignments in the QMan" section
in DPAA Reference Manual.
- fsl,qman
- fsl,bman
Usage: required
Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
- fsl,erratum-a050385
Usage: optional
Value type: boolean
Definition: A boolean property. Indicates the presence of the
erratum A050385 which indicates that DMA transactions that are
split can result in a FMan lock.
=============================================================================
FMan MURAM Node
DESCRIPTION
FMan Internal memory - shared between all the FMan modules.
It contains data structures that are common and written to or read by
the modules.
FMan internal memory is split into the following parts:
Packet buffering (Tx/Rx FIFOs)
Frames internal context
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: Must include "fsl,fman-muram"
- ranges
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property.
Specifies the multi-user memory offset and the size within
the FMan.
EXAMPLE
muram@0 {
compatible = "fsl,fman-muram";
ranges = <0 0x000000 0x28000>;
};
=============================================================================
FMan Port Node
DESCRIPTION
The Frame Manager (FMan) supports several types of hardware ports:
Ethernet receiver (RX)
Ethernet transmitter (TX)
Offline/Host command (O/H)
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: A standard property.
Must include one of the following:
- "fsl,fman-v2-port-oh" for FManV2 OH ports
- "fsl,fman-v2-port-rx" for FManV2 RX ports
- "fsl,fman-v2-port-tx" for FManV2 TX ports
- "fsl,fman-v3-port-oh" for FManV3 OH ports
- "fsl,fman-v3-port-rx" for FManV3 RX ports
- "fsl,fman-v3-port-tx" for FManV3 TX ports
- cell-index
Usage: required
Value type: <u32>
Definition: Specifies the hardware port id.
Each hardware port on the FMan has its own hardware PortID.
Super set of all hardware Port IDs available at FMan Reference
Manual under "FMan Hardware Ports in Freescale Devices" table.
Each hardware port is assigned a 4KB, port-specific page in
the FMan hardware port memory region (which is part of the
FMan memory map). The first 4 KB in the FMan hardware ports
memory region is used for what are called common registers.
The subsequent 63 4KB pages are allocated to the hardware
ports.
The page of a specific port is determined by the cell-index.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: There is one reg region describing the port
configuration registers.
- fsl,fman-10g-port
Usage: optional
Value type: boolean
Definition: The default port rate is 1G.
If this property exists, the port is s 10G port.
- fsl,fman-best-effort-port
Usage: optional
Value type: boolean
Definition: Can be defined only if 10G-support is set.
This property marks a best-effort 10G port (10G port that
may not be capable of line rate).
EXAMPLE
port@a8000 {
cell-index = <0x28>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xa8000 0x1000>;
};
port@88000 {
cell-index = <0x8>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x88000 0x1000>;
};
port@81000 {
cell-index = <0x1>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x81000 0x1000>;
};
=============================================================================
FMan dTSEC/XGEC/mEMAC Node
Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
============================================================================
FMan IEEE 1588 Node
Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
=============================================================================
FMan MDIO Node
DESCRIPTION
The MDIO is a bus to which the PHY devices are connected.
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: A standard property.
Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
FMan v3.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property.
- clocks
Usage: optional
Value type: <phandle>
Definition: A reference to the input clock of the controller
from which the MDC frequency is derived.
- clock-frequency
Usage: optional
Value type: <u32>
Definition: Specifies the external MDC frequency, in Hertz, to
be used. Requires that the input clock is specified in the
"clocks" property. See also: mdio.yaml.
- suppress-preamble
Usage: optional
Value type: <boolean>
Definition: Disable generation of preamble bits. See also:
mdio.yaml.
- interrupts
Usage: required for external MDIO
Value type: <prop-encoded-array>
Definition: Event interrupt of external MDIO controller.
- fsl,fman-internal-mdio
Usage: required for internal MDIO
Value type: boolean
Definition: Fman has internal MDIO for internal PCS(Physical
Coding Sublayer) PHYs and external MDIO for external PHYs.
The settings and programming routines for internal/external
MDIO are different. Must be included for internal MDIO.
- fsl,erratum-a009885
Usage: optional
Value type: <boolean>
Definition: Indicates the presence of the A009885
erratum describing that the contents of MDIO_DATA may
become corrupt unless it is read within 16 MDC cycles
of MDIO_CFG[BSY] being cleared, when performing an
MDIO read operation.
- fsl,erratum-a011043
Usage: optional
Value type: <boolean>
Definition: Indicates the presence of the A011043 erratum
describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
set when reading internal PCS registers. MDIO reads to
internal PCS registers may result in having the
MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
For internal PHY device on internal mdio bus, a PHY node should be created.
See the definition of the PHY node in booting-without-of.txt for an
example of how to define a PHY (Internal PHY has no interrupt line).
- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
The PCS PHY address should correspond to the value of the appropriate
MDEV_PORT.
EXAMPLE
Example for FMan v2 external MDIO:
mdio@f1000 {
compatible = "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
interrupts = <101 2 0 0>;
};
Example for FMan v2 internal MDIO:
mdio@e3120 {
compatible = "fsl,fman-mdio";
reg = <0xe3120 0xee0>;
fsl,fman-internal-mdio;
tbi1: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
Example for FMan v3 internal MDIO:
mdio@f1000 {
compatible = "fsl,fman-memac-mdio";
reg = <0xf1000 0x1000>;
fsl,fman-internal-mdio;
pcsphy6: ethernet-phy@0 {
reg = <0x0>;
};
};
=============================================================================
Example
fman@400000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
compatible = "fsl,fman"
ranges = <0 0x400000 0x100000>;
reg = <0x400000 0x100000>;
clocks = <&fman_clk>;
clock-names = "fmanclk";
interrupts = <
96 2 0 0
16 2 1 1>;
fsl,qman-channel-range = <0x40 0xc>;
muram@0 {
compatible = "fsl,fman-muram";
reg = <0x0 0x28000>;
};
port@81000 {
cell-index = <1>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x81000 0x1000>;
};
port@82000 {
cell-index = <2>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x82000 0x1000>;
};
port@83000 {
cell-index = <3>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x83000 0x1000>;
};
port@84000 {
cell-index = <4>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x84000 0x1000>;
};
port@85000 {
cell-index = <5>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x85000 0x1000>;
};
port@86000 {
cell-index = <6>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x86000 0x1000>;
};
fman1_rx_0x8: port@88000 {
cell-index = <0x8>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x88000 0x1000>;
};
fman1_rx_0x9: port@89000 {
cell-index = <0x9>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x89000 0x1000>;
};
fman1_rx_0xa: port@8a000 {
cell-index = <0xa>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x8a000 0x1000>;
};
fman1_rx_0xb: port@8b000 {
cell-index = <0xb>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x8b000 0x1000>;
};
fman1_rx_0xc: port@8c000 {
cell-index = <0xc>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x8c000 0x1000>;
};
fman1_rx_0x10: port@90000 {
cell-index = <0x10>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x90000 0x1000>;
};
fman1_tx_0x28: port@a8000 {
cell-index = <0x28>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xa8000 0x1000>;
};
fman1_tx_0x29: port@a9000 {
cell-index = <0x29>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xa9000 0x1000>;
};
fman1_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xaa000 0x1000>;
};
fman1_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xab000 0x1000>;
};
fman1_tx_0x2c: port@ac0000 {
cell-index = <0x2c>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xac000 0x1000>;
};
fman1_tx_0x30: port@b0000 {
cell-index = <0x30>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xb0000 0x1000>;
};
ethernet@e0000 {
compatible = "fsl,fman-dtsec";
cell-index = <0>;
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
tbi-handle = <&tbi5>;
};
ethernet@e2000 {
compatible = "fsl,fman-dtsec";
cell-index = <1>;
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
tbi-handle = <&tbi6>;
};
ethernet@e4000 {
compatible = "fsl,fman-dtsec";
cell-index = <2>;
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
tbi-handle = <&tbi7>;
};
ethernet@e6000 {
compatible = "fsl,fman-dtsec";
cell-index = <3>;
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
tbi-handle = <&tbi8>;
};
ethernet@e8000 {
compatible = "fsl,fman-dtsec";
cell-index = <4>;
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
tbi-handle = <&tbi9>;
ethernet@f0000 {
cell-index = <8>;
compatible = "fsl,fman-xgec";
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
};
ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
mdio@f1000 {
compatible = "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
interrupts = <101 2 0 0>;
};
};