// SPDX-License-Identifier: GPL-2.0-or-later /* * Based on drivers/video/omap/lcd_inn1510.c * * LCD panel support for the Amstrad E3 (Delta) videophone. * * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> */ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/lcd.h> #include <linux/soc/ti/omap1-io.h> #include "omapfb.h" #define AMS_DELTA_DEFAULT_CONTRAST 112 #define AMS_DELTA_MAX_CONTRAST 0x00FF #define AMS_DELTA_LCD_POWER 0x0100 /* LCD class device section */ static int ams_delta_lcd; static struct gpio_desc *gpiod_vblen; static struct gpio_desc *gpiod_ndisp; static int ams_delta_lcd_set_power(struct lcd_device *dev, int power) { if (power == FB_BLANK_UNBLANK) { if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) { omap_writeb(ams_delta_lcd & AMS_DELTA_MAX_CONTRAST, OMAP_PWL_ENABLE); omap_writeb(1, OMAP_PWL_CLK_ENABLE); ams_delta_lcd |= AMS_DELTA_LCD_POWER; } } else { if (ams_delta_lcd & AMS_DELTA_LCD_POWER) { omap_writeb(0, OMAP_PWL_ENABLE); omap_writeb(0, OMAP_PWL_CLK_ENABLE); ams_delta_lcd &= ~AMS_DELTA_LCD_POWER; } } return 0; } static int ams_delta_lcd_set_contrast(struct lcd_device *dev, int value) { if ((value >= 0) && (value <= AMS_DELTA_MAX_CONTRAST)) { omap_writeb(value, OMAP_PWL_ENABLE); ams_delta_lcd &= ~AMS_DELTA_MAX_CONTRAST; ams_delta_lcd |= value; } return 0; } #ifdef CONFIG_LCD_CLASS_DEVICE static int ams_delta_lcd_get_power(struct lcd_device *dev) { if (ams_delta_lcd & AMS_DELTA_LCD_POWER) return FB_BLANK_UNBLANK; else return FB_BLANK_POWERDOWN; } static int ams_delta_lcd_get_contrast(struct lcd_device *dev) { if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) return 0; return ams_delta_lcd & AMS_DELTA_MAX_CONTRAST; } static struct lcd_ops ams_delta_lcd_ops = { .get_power = ams_delta_lcd_get_power, .set_power = ams_delta_lcd_set_power, .get_contrast = ams_delta_lcd_get_contrast, .set_contrast = ams_delta_lcd_set_contrast, }; #endif /* omapfb panel section */ static int ams_delta_panel_enable(struct lcd_panel *panel) { gpiod_set_value(gpiod_ndisp, 1); gpiod_set_value(gpiod_vblen, 1); return 0; } static void ams_delta_panel_disable(struct lcd_panel *panel) { gpiod_set_value(gpiod_vblen, 0); gpiod_set_value(gpiod_ndisp, 0); } static struct lcd_panel ams_delta_panel = { .name = "ams-delta", .config = 0, .bpp = 12, .data_lines = 16, .x_res = 480, .y_res = 320, .pixel_clock = 4687, .hsw = 3, .hfp = 1, .hbp = 1, .vsw = 1, .vfp = 0, .vbp = 0, .pcd = 0, .acb = 37, .enable = ams_delta_panel_enable, .disable = ams_delta_panel_disable, }; /* platform driver section */ static int ams_delta_panel_probe(struct platform_device *pdev) { struct lcd_device *lcd_device = NULL; gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW); if (IS_ERR(gpiod_vblen)) return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_vblen), "VBLEN GPIO request failed\n"); gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW); if (IS_ERR(gpiod_ndisp)) return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_ndisp), "NDISP GPIO request failed\n"); #ifdef CONFIG_LCD_CLASS_DEVICE lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL, &ams_delta_lcd_ops); if (IS_ERR(lcd_device)) { int ret = PTR_ERR(lcd_device); dev_err(&pdev->dev, "failed to register device\n"); return ret; } platform_set_drvdata(pdev, lcd_device); lcd_device->props.max_contrast = AMS_DELTA_MAX_CONTRAST; #endif ams_delta_lcd_set_contrast(lcd_device, AMS_DELTA_DEFAULT_CONTRAST); ams_delta_lcd_set_power(lcd_device, FB_BLANK_UNBLANK); omapfb_register_panel(&ams_delta_panel); return 0; } static struct platform_driver ams_delta_panel_driver = { .probe = ams_delta_panel_probe, .driver = { .name = "lcd_ams_delta", }, }; module_platform_driver(ams_delta_panel_driver); MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>"); MODULE_DESCRIPTION("LCD panel support for the Amstrad E3 (Delta) videophone"); MODULE_LICENSE("GPL");