#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Please run as root

# IMPORTANT: If you add a new test CATEGORY please add a simple wrapper
# script so kunit knows to run it, and add it to the list below.
# If you do not YOUR TESTS WILL NOT RUN IN THE CI.

# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4

count_total=0
count_pass=0
count_fail=0
count_skip=0
exitcode=0

usage() {
	cat <<EOF
usage: ${BASH_SOURCE[0]:-$0} [ options ]

  -a: run all tests, including extra ones (other than destructive ones)
  -t: specify specific categories to tests to run
  -h: display this message
  -n: disable TAP output
  -d: run destructive tests

The default behavior is to run required tests only.  If -a is specified,
will run all tests.

Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
	tests for mmap(2)
- gup_test
	tests for gup
- userfaultfd
	tests for  userfaultfd(2)
- compaction
	a test for the patch "Allow compaction of unevictable pages"
- mlock
	tests for mlock(2)
- mremap
	tests for mremap(2)
- hugevm
	tests for very large virtual address space
- vmalloc
	vmalloc smoke tests
- hmm
	hmm smoke tests
- madv_guard
	test madvise(2) MADV_GUARD_INSTALL and MADV_GUARD_REMOVE options
- madv_populate
	test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
	test memfd_secret(2)
- process_mrelease
	test process_mrelease(2)
- ksm
	ksm tests that do not require >=2 NUMA nodes
- ksm_numa
	ksm tests that require >=2 NUMA nodes
- pkey
	memory protection key tests
- soft_dirty
	test soft dirty page bit semantics
- pagemap
	test pagemap_scan IOCTL
- pfnmap
	tests for VM_PFNMAP handling
- process_madv
	test for process_madv
- cow
	test copy-on-write semantics
- thp
	test transparent huge pages
- hugetlb
	test hugetlbfs huge pages
- migration
	invoke move_pages(2) to exercise the migration entry code
	paths in the kernel
- mkdirty
	test handling of code that might set PTE/PMD dirty in
	read-only VMAs
- mdwe
	test prctl(PR_SET_MDWE, ...)
- page_frag
	test handling of page fragment allocation and freeing
- vma_merge
	test VMA merge cases behave as expected
- rmap
	test rmap behaves as expected
- memory-failure
	test memory-failure behaves as expected

example: ./run_vmtests.sh -t "hmm mmap ksm"
EOF
}

RUN_ALL=false
RUN_DESTRUCTIVE=false
TAP_PREFIX="# "

VM_SELFTEST_ITEMS="default"

while getopts "aht:nd" OPT; do
	case ${OPT} in
		"a") RUN_ALL=true ;;
		"h") usage; exit 0 ;;
		"t") VM_SELFTEST_ITEMS=${OPTARG} ;;
		"n") TAP_PREFIX= ;;
		"d") RUN_DESTRUCTIVE=true ;;
		"?") exit 1 ;;
	esac
done
shift $((OPTIND -1))

# Normalize whitespace so validation and test_selected() use the same names.
read -r -a selected_categories <<< "${VM_SELFTEST_ITEMS//$'\n'/ }"
VM_SELFTEST_ITEMS="${selected_categories[*]}"
if [ -z "$VM_SELFTEST_ITEMS" ]; then
	echo "No test categories specified" >&2
	exit 1
fi

if [ "$VM_SELFTEST_ITEMS" != "default" ]; then
	# Keep the documented category list as the source of valid names.
	valid_categories=$(usage | sed -n 's/^- //p')
	for category in "${selected_categories[@]}"; do
		if ! grep -Fxq -- "$category" <<< "$valid_categories"; then
			echo "Unknown test category: $category" >&2
			exit 1
		fi
	done
fi

test_selected() {
	if [ "$VM_SELFTEST_ITEMS" == "default" ]; then
		# If no VM_SELFTEST_ITEMS are specified, run all tests
		return 0
	fi
	# If test selected argument is one of the test items
	if [[ " ${VM_SELFTEST_ITEMS[*]} " =~ " ${1} " ]]; then
	        return 0
	else
	        return 1
	fi
}

# filter 64bit architectures
ARCH64STR="arm64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sparc64 x86_64"
if [ -z "$ARCH" ]; then
	ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
fi
VADDR64=0
echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1

tap_prefix() {
	sed -e "s/^/${TAP_PREFIX}/"
}

tap_output() {
	if [[ ! -z "$TAP_PREFIX" ]]; then
		read str
		echo $str
	fi
}

pretty_name() {
	echo "$*" | sed -e 's/^\(bash \)\?\.\///'
}

# Usage: run_test [test binary] [arbitrary test arguments...]
run_test() {
	if test_selected ${CATEGORY}; then
		local skip=0
		local LOADED_HWPOISON_INJECT_MOD=0

		# On memory constrainted systems some tests can fail to allocate hugepages.
		# perform some cleanup before the test for a higher success rate.
		if [ ${CATEGORY} == "thp" -o ${CATEGORY} == "hugetlb" ]; then
			mem_kb=$(awk '/MemAvailable/ {print $2}' /proc/meminfo)
			mem_Mb=$((mem_kb / 1024))

			if (( $mem_Mb < 256 )); then
				echo 3 > /proc/sys/vm/drop_caches
				sleep 2
				echo 1 > /proc/sys/vm/compact_memory
				sleep 2
			fi
		fi

		# Ensure hwpoison_inject is available for memory-failure tests
		if [ "${CATEGORY}" = "memory-failure" ]; then
			# Try to load hwpoison_inject if not present.
			HWPOISON_DIR=/sys/kernel/debug/hwpoison/
			if [ ! -d "$HWPOISON_DIR" ]; then
				if ! modprobe -n hwpoison_inject > /dev/null 2>&1; then
					echo "Module hwpoison_inject not found, skipping..." \
						| tap_prefix
					skip=1
				else
					modprobe hwpoison_inject > /dev/null 2>&1
					LOADED_HWPOISON_INJECT_MOD=1
					if [ ! -d "$HWPOISON_DIR" ]; then
						echo "hwpoison debugfs interface not present" \
							| tap_prefix
						skip=1
					fi
				fi
			fi

		fi

		local test=$(pretty_name "$*")
		local title="running $*"
		local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
		printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" | tap_prefix

		if [ $skip -eq 1 ]; then
			local ret=$ksft_skip
		else
			("$@" 2>&1) | tap_prefix
			local ret=${PIPESTATUS[0]}
		fi

		# Unload hwpoison_inject if we loaded it
		if [ "${LOADED_HWPOISON_INJECT_MOD}" = "1" ]; then
			modprobe -r hwpoison_inject > /dev/null 2>&1
		fi

		count_total=$(( count_total + 1 ))
		if [ $ret -eq 0 ]; then
			count_pass=$(( count_pass + 1 ))
			echo "[PASS]" | tap_prefix
			echo "ok ${count_total} ${test}" | tap_output
		elif [ $ret -eq $ksft_skip ]; then
			count_skip=$(( count_skip + 1 ))
			echo "[SKIP]" | tap_prefix
			echo "ok ${count_total} ${test} # SKIP" | tap_output
			if [ $exitcode -eq 0 ]; then
				exitcode=$ksft_skip
			fi
		else
			count_fail=$(( count_fail + 1 ))
			echo "[FAIL]" | tap_prefix
			echo "not ok ${count_total} ${test} # exit=$ret" | tap_output
			exitcode=1
		fi
	fi # test_selected
}

echo "TAP version 13" | tap_output

CATEGORY="hugetlb" run_test ./hugetlb-mmap
CATEGORY="hugetlb" run_test ./hugetlb-shm
CATEGORY="hugetlb" run_test ./hugetlb-mremap
CATEGORY="hugetlb" run_test ./hugetlb-madvise
CATEGORY="hugetlb" run_test ./hugetlb_dio
CATEGORY="hugetlb" run_test ./hugetlb_fault_after_madv
CATEGORY="hugetlb" run_test ./hugetlb_madv_vs_map

if test_selected "hugetlb"; then
	echo "NOTE: These hugetlb tests provide minimal coverage.  Use"	  | tap_prefix
	echo "      https://github.com/libhugetlbfs/libhugetlbfs.git for" | tap_prefix
	echo "      hugetlb regression testing."			  | tap_prefix
fi

CATEGORY="mmap" run_test ./map_fixed_noreplace

CATEGORY="gup_test" run_test ./gup
CATEGORY="gup_test" run_test ./gup_longterm

CATEGORY="userfaultfd" run_test ./uffd-unit-tests
uffd_stress_bin=./uffd-stress
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} anon 20 16
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb 128 32
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb-private 128 32
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} shmem 20 16
CATEGORY="userfaultfd" run_test ${uffd_stress_bin} shmem-private 20 16
CATEGORY="userfaultfd" run_test ./uffd-wp-mremap

CATEGORY="compaction" run_test ./compaction_test

if command -v sudo &> /dev/null && sudo -u nobody ls ./on-fault-limit >/dev/null;
then
	CATEGORY="mlock" run_test sudo -u nobody sh -c ./on-fault-limit
else
	echo "# SKIP ./on-fault-limit"
fi

CATEGORY="mmap" run_test ./map_populate
CATEGORY="mmap" run_test ./droppable

CATEGORY="mlock" run_test ./mlock-random-test

CATEGORY="mlock" run_test ./mlock2-tests

CATEGORY="process_mrelease" run_test ./mrelease_test

CATEGORY="mremap" run_test ./mremap_test

CATEGORY="hugetlb" run_test ./thuge-gen
CATEGORY="hugetlb" run_test ./charge_reserved_hugetlb.sh -cgroup-v2
CATEGORY="hugetlb" run_test ./hugetlb_reparenting_test.sh -cgroup-v2

if $RUN_DESTRUCTIVE; then
enable_soft_offline=$(cat /proc/sys/vm/enable_soft_offline)
CATEGORY="hugetlb" run_test ./hugetlb-soft-offline
echo "$enable_soft_offline" > /proc/sys/vm/enable_soft_offline
CATEGORY="hugetlb" run_test ./hugetlb-read-hwpoison
fi

if [ $VADDR64 -ne 0 ]; then
	# va high address boundary switch test
	CATEGORY="hugevm" run_test bash ./va_high_addr_switch.sh
fi # VADDR64

# vmalloc stability smoke test
CATEGORY="vmalloc" run_test bash ./test_vmalloc.sh smoke

CATEGORY="mremap" run_test ./mremap_dontunmap

CATEGORY="hmm" run_test bash ./test_hmm.sh smoke

# MADV_GUARD_INSTALL and MADV_GUARD_REMOVE tests
CATEGORY="madv_guard" run_test ./guard-regions

# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
CATEGORY="madv_populate" run_test ./madv_populate

# PROCESS_MADV test
CATEGORY="process_madv" run_test ./process_madv

CATEGORY="vma_merge" run_test ./merge

if test_selected "memfd_secret" && [ -x ./memfd_secret ]
then
if [ -f /proc/sys/kernel/yama/ptrace_scope ]; then
	(echo 0 > /proc/sys/kernel/yama/ptrace_scope 2>&1) | tap_prefix
fi
CATEGORY="memfd_secret" run_test ./memfd_secret
fi

# KSM KSM_MERGE_TIME_HUGE_PAGES test with size of 100
CATEGORY="ksm" run_test ./ksm_tests -H -s 100
# KSM KSM_MERGE_TIME test with size of 100
CATEGORY="ksm" run_test ./ksm_tests -P -s 100
# KSM MADV_MERGEABLE test with 10 identical pages
CATEGORY="ksm" run_test ./ksm_tests -M -p 10
# KSM unmerge test
CATEGORY="ksm" run_test ./ksm_tests -U
# KSM test with 10 zero pages and use_zero_pages = 0
CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
# KSM test with 10 zero pages and use_zero_pages = 1
CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 1
CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 0
CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0

CATEGORY="ksm" run_test ./ksm_functional_tests

# protection_keys tests
if [ -x ./protection_keys_32 ]
then
	CATEGORY="pkey" run_test ./protection_keys_32
fi

if [ -x ./protection_keys_64 ]
then
	CATEGORY="pkey" run_test ./protection_keys_64
fi

CATEGORY="soft_dirty" run_test ./soft-dirty

CATEGORY="pagemap" run_test ./pagemap_ioctl

CATEGORY="pfnmap" run_test ./pfnmap

# COW tests
CATEGORY="cow" run_test ./cow

CATEGORY="thp" run_test ./folio_order_check

CATEGORY="thp" run_test ./khugepaged_sync_check

CATEGORY="thp" run_test ./khugepaged_race

CATEGORY="thp" run_test ./khugepaged

CATEGORY="thp" run_test ./khugepaged -s 2

CATEGORY="thp" run_test ./khugepaged all:shmem

CATEGORY="thp" run_test ./khugepaged -s 4 all:shmem

# Try to create XFS if not provided
if [ -z "${SPLIT_HUGE_PAGE_TEST_XFS_PATH}" ]; then
    if test_selected "thp"; then
	if grep xfs /proc/filesystems &>/dev/null; then
	    XFS_IMG=$(mktemp /tmp/xfs_img_XXXXXX)
	    XFS_DIR=$(mktemp -d /tmp/xfs_dir_XXXXXX)
	    truncate -s 314572800 ${XFS_IMG}
	    if mkfs.xfs -q ${XFS_IMG} && mount -t xfs -o loop ${XFS_IMG} ${XFS_DIR}; then
	        SPLIT_HUGE_PAGE_TEST_XFS_PATH=${XFS_DIR}
	        MOUNTED_XFS=1
	    else
	        rmdir ${XFS_DIR}
	        rm -f ${XFS_IMG}
	    fi
	fi
    fi
fi

if [ -n "${SPLIT_HUGE_PAGE_TEST_XFS_PATH}" ]; then
CATEGORY="thp" run_test ./khugepaged all:file ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
elif test_selected thp; then
	count_total=$(( count_total + 1 ))
	count_skip=$(( count_skip + 1 ))
	echo "[SKIP] ./khugepaged all:file" | tap_prefix
fi

CATEGORY="thp" run_test ./split_huge_page_test ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}

if [ -n "${MOUNTED_XFS}" ]; then
    umount ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
    rmdir ${SPLIT_HUGE_PAGE_TEST_XFS_PATH}
    rm -f ${XFS_IMG}
fi

CATEGORY="thp" run_test ./transhuge-stress -d 20

CATEGORY="thp" run_test ./folio_split_race_test

CATEGORY="migration" run_test ./migration

CATEGORY="mkdirty" run_test ./mkdirty

CATEGORY="mdwe" run_test ./mdwe_test

CATEGORY="page_frag" run_test ./test_page_frag.sh smoke

CATEGORY="page_frag" run_test ./test_page_frag.sh aligned

CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned

CATEGORY="rmap" run_test ./rmap

CATEGORY="memory-failure" run_test ./memory-failure

echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix
echo "1..${count_total}" | tap_output

exit $exitcode