# SPDX-License-Identifier: GPL-2.0-only # # Ethernet LAN device configuration # menuconfig ETHERNET bool "Ethernet driver support" depends on NET default y help This section contains all the Ethernet device drivers. if ETHERNET config MDIO tristate config SUNGEM_PHY tristate source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/actions/Kconfig" source "drivers/net/ethernet/adaptec/Kconfig" source "drivers/net/ethernet/aeroflex/Kconfig" source "drivers/net/ethernet/agere/Kconfig" source "drivers/net/ethernet/alacritech/Kconfig" source "drivers/net/ethernet/allwinner/Kconfig" source "drivers/net/ethernet/alteon/Kconfig" source "drivers/net/ethernet/altera/Kconfig" source "drivers/net/ethernet/amazon/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/apm/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/aquantia/Kconfig" source "drivers/net/ethernet/arc/Kconfig" source "drivers/net/ethernet/asix/Kconfig" source "drivers/net/ethernet/atheros/Kconfig" config CX_ECAT tristate "Beckhoff CX5020 EtherCAT master support" depends on PCI depends on X86 || COMPILE_TEST help Driver for EtherCAT master module located on CCAT FPGA that can be found on Beckhoff CX5020, and possibly other of CX Beckhoff CX series industrial PCs. To compile this driver as a module, choose M here. The module will be called ec_bhf. source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/cadence/Kconfig" source "drivers/net/ethernet/calxeda/Kconfig" source "drivers/net/ethernet/cavium/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cirrus/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" source "drivers/net/ethernet/cortina/Kconfig" source "drivers/net/ethernet/davicom/Kconfig" config DNET tristate "Dave ethernet support (DNET)" depends on HAS_IOMEM select PHYLIB help The Dave ethernet interface (DNET) is found on Qong Board FPGA. Say Y to include support for the DNET chip. To compile this driver as a module, choose M here: the module will be called dnet. source "drivers/net/ethernet/dec/Kconfig" source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/engleder/Kconfig" source "drivers/net/ethernet/ezchip/Kconfig" source "drivers/net/ethernet/faraday/Kconfig" source "drivers/net/ethernet/freescale/Kconfig" source "drivers/net/ethernet/fujitsu/Kconfig" source "drivers/net/ethernet/fungible/Kconfig" source "drivers/net/ethernet/google/Kconfig" source "drivers/net/ethernet/hisilicon/Kconfig" source "drivers/net/ethernet/huawei/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/xscale/Kconfig" config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI select CRC32 select MII help This driver supports the PCI-Express gigabit ethernet adapters based on JMicron JMC250 chipset. To compile this driver as a module, choose M here. The module will be called jme. config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on MIKROTIK_RB532 || COMPILE_TEST select CRC32 select MII help If you have a Mikrotik RouterBoard 500 or IDT RC32434 based system say Y. Otherwise say N. config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY help Support for the MII0 inside the Lantiq SoC config LANTIQ_XRX200 tristate "Lantiq / Intel xRX200 PMAC network driver" depends on SOC_TYPE_XWAY help Support for the PMAC of the Gigabit switch (GSWIP) inside the Lantiq / Intel VRX200 VDSL SoC source "drivers/net/ethernet/adi/Kconfig" source "drivers/net/ethernet/litex/Kconfig" source "drivers/net/ethernet/marvell/Kconfig" source "drivers/net/ethernet/mediatek/Kconfig" source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/micrel/Kconfig" source "drivers/net/ethernet/microchip/Kconfig" source "drivers/net/ethernet/mscc/Kconfig" source "drivers/net/ethernet/microsoft/Kconfig" source "drivers/net/ethernet/moxa/Kconfig" source "drivers/net/ethernet/myricom/Kconfig" config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on PCI select CRC32 select MII help Say Y here to support the Myson MTD-800 family of PCI-based Ethernet cards. <http://www.myson.com.tw/> source "drivers/net/ethernet/ni/Kconfig" source "drivers/net/ethernet/natsemi/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/netronome/Kconfig" source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/nvidia/Kconfig" source "drivers/net/ethernet/nxp/Kconfig" source "drivers/net/ethernet/oki-semi/Kconfig" config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" depends on HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 select BITREVERSE help Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. source "drivers/net/ethernet/packetengines/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/pensando/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/qualcomm/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/sgi/Kconfig" source "drivers/net/ethernet/silan/Kconfig" source "drivers/net/ethernet/sis/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" source "drivers/net/ethernet/socionext/Kconfig" source "drivers/net/ethernet/stmicro/Kconfig" source "drivers/net/ethernet/sun/Kconfig" source "drivers/net/ethernet/sunplus/Kconfig" source "drivers/net/ethernet/synopsys/Kconfig" source "drivers/net/ethernet/tehuti/Kconfig" source "drivers/net/ethernet/ti/Kconfig" source "drivers/net/ethernet/toshiba/Kconfig" source "drivers/net/ethernet/tundra/Kconfig" source "drivers/net/ethernet/vertexcom/Kconfig" source "drivers/net/ethernet/via/Kconfig" source "drivers/net/ethernet/wangxun/Kconfig" source "drivers/net/ethernet/wiznet/Kconfig" source "drivers/net/ethernet/xilinx/Kconfig" source "drivers/net/ethernet/xircom/Kconfig" endif # ETHERNET