// SPDX-License-Identifier: GPL-2.0-only /* * Routines common to most mpc85xx-based boards. */ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/fsl_pm.h> #include <soc/fsl/qe/qe.h> #include <sysdev/cpm2_pic.h> #include "mpc85xx.h" const struct fsl_pm_ops *qoriq_pm_ops; static const struct of_device_id mpc85xx_common_ids[] __initconst = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, { .name = "cpm", }, { .name = "localbus", }, { .compatible = "gianfar", }, { .compatible = "fsl,qe", }, { .compatible = "fsl,cpm2", }, { .compatible = "fsl,srio", }, /* So that the DMA channel nodes can be probed individually: */ { .compatible = "fsl,eloplus-dma", }, /* For the PMC driver */ { .compatible = "fsl,mpc8548-guts", }, /* Probably unnecessary? */ { .compatible = "gpio-leds", }, /* For all PCI controllers */ { .compatible = "fsl,mpc8540-pci", }, { .compatible = "fsl,mpc8548-pcie", }, { .compatible = "fsl,p1022-pcie", }, { .compatible = "fsl,p1010-pcie", }, { .compatible = "fsl,p1023-pcie", }, { .compatible = "fsl,p4080-pcie", }, { .compatible = "fsl,qoriq-pcie-v2.4", }, { .compatible = "fsl,qoriq-pcie-v2.3", }, { .compatible = "fsl,qoriq-pcie-v2.2", }, { .compatible = "fsl,fman", }, {}, }; int __init mpc85xx_common_publish_devices(void) { return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL); } #ifdef CONFIG_CPM2 static void cpm2_cascade(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); int cascade_irq; while ((cascade_irq = cpm2_get_irq()) >= 0) generic_handle_irq(cascade_irq); chip->irq_eoi(&desc->irq_data); } void __init mpc85xx_cpm2_pic_init(void) { struct device_node *np; int irq; /* Setup CPM2 PIC */ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); if (np == NULL) { printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); return; } irq = irq_of_parse_and_map(np, 0); if (!irq) { of_node_put(np); printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n"); return; } cpm2_pic_init(np); of_node_put(np); irq_set_chained_handler(irq, cpm2_cascade); } #endif #ifdef CONFIG_QUICC_ENGINE void __init mpc85xx_qe_par_io_init(void) { struct device_node *np; np = of_find_node_by_name(NULL, "par_io"); if (np) { struct device_node *ucc; par_io_init(np); of_node_put(np); for_each_node_by_name(ucc, "ucc") par_io_of_config(ucc); } } #endif