// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2012 Sascha Hauer, Pengutronix
#include "imx27-pinfunc.h"
#include <dt-bindings/clock/imx27-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
*/
chosen {};
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
i2c0 = &i2c1;
i2c1 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
spi0 = &cspi1;
spi1 = &cspi2;
spi2 = &cspi3;
};
aitc: aitc-interrupt-controller@10040000 {
compatible = "fsl,imx27-aitc", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10040000 0x1000>;
};
clocks {
clk_osc26m: osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
};
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu: cpu@0 {
device_type = "cpu";
reg = <0>;
compatible = "arm,arm926ej-s";
operating-points = <
/* kHz uV */
266000 1300000
399000 1450000
>;
clock-latency = <62500>;
clocks = <&clks IMX27_CLK_CPU_DIV>;
voltage-tolerance = <5>;
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&aitc>;
ranges;
aipi1: aipi@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10000000 0x20000>;
ranges;
dma: dma@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32>;
clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
<&clks IMX27_CLK_DMA_AHB_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <1>;
dma-channels = <16>;
};
wdog: watchdog@10002000 {
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x1000>;
interrupts = <27>;
clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
pwm: pwm@10006000 {
#pwm-cells = <3>;
compatible = "fsl,imx27-pwm";
reg = <0x10006000 0x1000>;
interrupts = <23>;
clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
rtc: rtc@10007000 {
compatible = "fsl,imx21-rtc";
reg = <0x10007000 0x1000>;
interrupts = <22>;
clocks = <&clks IMX27_CLK_CKIL>,
<&clks IMX27_CLK_RTC_IPG_GATE>;
clock-names = "ref", "ipg";
};
kpp: kpp@10008000 {
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
reg = <0x10008000 0x1000>;
interrupts = <21>;
clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
status = "disabled";
};
owire: owire@10009000 {
compatible = "fsl,imx27-owire", "fsl,imx21-owire";
reg = <0x10009000 0x1000>;
clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
status = "disabled";
};
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@1000b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@1000c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@1000d000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
cspi1: spi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
cspi2: spi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi1: ssi@10010000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10010000 0x1000>;
interrupts = <14>;
clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
status = "disabled";
};
ssi2: ssi@10011000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10011000 0x1000>;
interrupts = <13>;
clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
status = "disabled";
};
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
status = "disabled";
};
sdhci1: mmc@10013000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10013000 0x1000>;
interrupts = <11>;
clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 7>;
dma-names = "rx-tx";
status = "disabled";
};
sdhci2: mmc@10014000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10014000 0x1000>;
interrupts = <10>;
clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 6>;
dma-names = "rx-tx";
status = "disabled";
};
iomuxc: iomuxc@10015000 {
compatible = "fsl,imx27-iomuxc";
reg = <0x10015000 0x600>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio1: gpio@10015000 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015000 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015100 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015200 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015300 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015400 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015500 0x100>;
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
audmux: audmux@10016000 {
compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
reg = <0x10016000 0x1000>;
clocks = <&clks IMX27_CLK_DUMMY>;
clock-names = "audmux";
status = "disabled";
};
cspi3: spi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
uart5: serial@1001b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
uart6: serial@1001c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@1001d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
status = "disabled";
};
sdhci3: mmc@1001e000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x1001e000 0x1000>;
interrupts = <9>;
clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 36>;
dma-names = "rx-tx";
status = "disabled";
};
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
};
aipi2: aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10020000 0x20000>;
ranges;
fb: fb@10021000 {
compatible = "fsl,imx27-fb", "fsl,imx21-fb";
interrupts = <61>;
reg = <0x10021000 0x1000>;
clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
<&clks IMX27_CLK_LCDC_AHB_GATE>,
<&clks IMX27_CLK_PER3_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
coda: coda@10023000 {
compatible = "fsl,imx27-vpu", "cnm,codadx6";
reg = <0x10023000 0x0200>;
interrupts = <53>;
clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
<&clks IMX27_CLK_VPU_AHB_GATE>;
clock-names = "per", "ahb";
iram = <&iram>;
};
usbotg: usb@10024000 {
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
usbh1: usb@10024200 {
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
};
usbh2: usb@10024400 {
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
usbmisc: usbmisc@10024600 {
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
};
sahara2: crypto@10025000 {
compatible = "fsl,imx27-sahara";
reg = <0x10025000 0x1000>;
interrupts = <59>;
clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
<&clks IMX27_CLK_SAHARA_AHB_GATE>;
clock-names = "ipg", "ahb";
};
clks: ccm@10027000 {
compatible = "fsl,imx27-ccm";
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};
iim: efuse@10028000 {
compatible = "fsl,imx27-iim";
reg = <0x10028000 0x1000>;
interrupts = <62>;
clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
};
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x1000>;
interrupts = <50>;
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
<&clks IMX27_CLK_FEC_AHB_GATE>;
clock-names = "ipg", "ahb";
status = "disabled";
};
};
nfc: nand-controller@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
status = "disabled";
};
weim: weim@d8002000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,imx27-weim";
reg = <0xd8002000 0x1000>;
clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
ranges = <
0 0 0xc0000000 0x08000000
1 0 0xc8000000 0x08000000
2 0 0xd0000000 0x02000000
3 0 0xd2000000 0x02000000
4 0 0xd4000000 0x02000000
5 0 0xd6000000 0x02000000
>;
status = "disabled";
};
iram: sram@ffff4c00 {
compatible = "mmio-sram";
reg = <0xffff4c00 0xb400>;
};
};
};