# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2025 Texas Instruments Incorporated -  http://www.ti.com/
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/ti,vip.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Texas Instruments DRA7x Video Input Port (VIP)

maintainers:
  - Yemike Abhilash Chandra <y-abhilashchandra@ti.com>

description: |-
  Video Input Port (VIP) can be found on devices such as DRA7xx and
  provides the system interface and the processing capability to
  connect parallel image-sensor as well as BT.656/1120 capable encoder
  chip to DRA7x device.

  Each VIP instance supports 2 independently configurable external
  video input capture slices (Slice 0 and Slice 1) each providing
  up to two video input ports (Port A and Port B).

properties:
  compatible:
    enum:
      - ti,dra7-vip

  reg:
    maxItems: 1

  interrupts:
    items:
      - description: IRQ index 0 is used for Slice0 interrupts
      - description: IRQ index 1 is used for Slice1 interrupts

  ti,ctrl-module:
    description:
      Reference to the device control module that provides clock-edge
      inversion control for VIP ports. These controls allow the
      VIP to sample pixel data on the correct clock edge.
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      items:
        - description: phandle to device control module
        - description: offset to the CTRL_CORE_SMA_SW_1 register
        - description: Bit field to slice 0 port A
        - description: Bit field to slice 0 port B
        - description: Bit field to slice 1 port A
        - description: Bit field to slice 1 port B
    maxItems: 1

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    patternProperties:
      '^port@[0-3]$':
        $ref: /schemas/graph.yaml#/$defs/port-base
        unevaluatedProperties: false
        description: |
          Each VIP instance supports 2 independently configurable external video
          input capture slices (Slice 0 and Slice 1) each providing up to two video
          input ports (Port A and Port B). These ports represent the following
          port@0 -> Slice 0 Port A
          port@1 -> Slice 0 Port B
          port@2 -> Slice 1 Port A
          port@3 -> Slice 1 Port B

        properties:
          endpoint:
            $ref: /schemas/media/video-interfaces.yaml#
            unevaluatedProperties: false

            properties:
              bus-width:
                enum: [8, 16, 24]
                default: 8

required:
  - compatible
  - reg
  - interrupts
  - ti,ctrl-module
  - ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    video@48970000 {
      compatible = "ti,dra7-vip";
      reg = <0x48970000 0x1000>;
      interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
                   <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
      ti,ctrl-module = <&scm_conf 0x534 0x0 0x2 0x1 0x3>;

      ports {
        #address-cells = <1>;
        #size-cells = <0>;

        vin1a: port@0 {
          reg = <0>;

          vin1a_ep: endpoint {
            remote-endpoint = <&camera1>;
            hsync-active = <1>;
            vsync-active = <1>;
            pclk-sample = <0>;
            bus-width = <8>;
          };
        };

        vin1b: port@1 {
          reg = <1>;

          vin1b_ep: endpoint {
            remote-endpoint = <&camera2>;
            hsync-active = <1>;
            vsync-active = <1>;
            pclk-sample = <0>;
            bus-width = <8>;
          };
        };

        vin2a: port@2 {
          reg = <2>;

          vin2a_ep: endpoint {
            remote-endpoint = <&camera3>;
            hsync-active = <1>;
            vsync-active = <1>;
            pclk-sample = <0>;
            bus-width = <16>;
          };
        };

        vin2b: port@3 {
          reg = <3>;

          vin2b_ep: endpoint {
            remote-endpoint = <&camera4>;
            hsync-active = <1>;
            vsync-active = <1>;
            pclk-sample = <0>;
            bus-width = <8>;
          };
        };
      };
    };
...