// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2026 Mizuno Miotsuki <founder@crepuse.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3308.dtsi"
/ {
model = "DFRobot UNIHIKER M10 V1.2";
compatible = "dfrobot,unihiker-m10-v1.2", "rockchip,rk3308";
aliases {
mmc0 = &emmc;
mmc1 = &sdmmc;
mmc2 = &sdio;
};
chosen {
stdout-path = "serial0:1500000n8";
};
keys {
compatible = "gpio-keys";
key-a {
debounce-interval = <20>;
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
label = "A";
linux,code = <KEY_A>;
};
key-b {
debounce-interval = <20>;
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
label = "B";
linux,code = <KEY_B>;
};
key-home {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
label = "Home";
linux,code = <KEY_HOME>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
};
vcc_1v8: regulator-vcc-1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
vcc_io: regulator-vcc-io {
compatible = "regulator-fixed";
regulator-name = "vcc_io";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc_sd: regulator-vcc-sd {
compatible = "regulator-fixed";
gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sd_vcc_en>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_host_vbus_en>;
regulator-name = "vcc5v0_usb_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vdd_core: regulator-vdd-core {
compatible = "pwm-regulator";
pwms = <&pwm0 0 5000 1>;
regulator-name = "vdd_core";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <827000>;
regulator-max-microvolt = <1340000>;
regulator-settling-time-up-us = <250>;
};
};
&cpu0 {
cpu-supply = <&vdd_core>;
};
&emmc {
cap-mmc-highspeed;
no-1-8-v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
vmmc-supply = <&vcc_io>;
status = "okay";
};
&io_domains {
vccio0-supply = <&vcc_io>;
vccio1-supply = <&vcc_io>;
vccio2-supply = <&vcc_io>;
vccio3-supply = <&vcc_io>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_io>;
status = "okay";
};
&otp {
status = "disabled";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
sdmmc {
sd_vcc_en: sd-vcc-en {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
usb_host_vbus_en: usb-host-vbus-en {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wifi {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake: wifi-host-wake {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin_pull_down>;
status = "okay";
};
&sdio {
#address-cells = <1>;
#size-cells = <0>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
no-mmc;
no-sd;
non-removable;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
wifi@1 {
reg = <1>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake>;
};
};
&sdmmc {
cap-sd-highspeed;
disable-wp;
no-1-8-v;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vcc_io>;
status = "okay";
};
&u2phy {
status = "okay";
};
&u2phy_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&u2phy_otg {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "okay";
};
&usb20_otg {
dr_mode = "peripheral";
status = "okay";
};
&usb_host_ehci {
status = "okay";
};
&usb_host_ohci {
status = "okay";
};
&wdt {
status = "okay";
};