# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/nuvoton,npcm750-pwm-fan.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Nuvoton NPCM7xx/NPCM8xx PWM and Fan Tach Controller

maintainers:
  - Tomer Maimon <tmaimon77@gmail.com>

description:
  The NPCM7xx/NPCM8xx family includes a PWM and Fan Tachometer controller.
  The controller provides up to 8 (NPCM7xx) or 12 (NPCM8xx) PWM channels and up
  to 16 tachometer inputs. It is used for fan speed control and monitoring.

properties:
  compatible:
    enum:
      - nuvoton,npcm750-pwm-fan
      - nuvoton,npcm845-pwm-fan

  reg:
    maxItems: 2
    description: Register addresses for PWM and Fan Tach units.

  reg-names:
    items:
      - const: pwm
      - const: fan

  clocks:
    maxItems: 2
    description: Clocks for the PWM and Fan Tach modules.

  clock-names:
    items:
      - const: pwm
      - const: fan

  interrupts:
    description:
      Contains the Fan interrupts with flags for falling edge.
      For NPCM7XX, 8 interrupt lines are expected (one per PWM channel).
      For NPCM8XX, 12 interrupt lines are expected (one per PWM channel).

    minItems: 8
    maxItems: 12

  "#address-cells":
    const: 1

  "#size-cells":
    const: 0

patternProperties:
  "^fan@[0-9a-f]+$":
    type: object
    $ref: fan-common.yaml#
    unevaluatedProperties: false

    properties:
      reg:
        description:
          Specify the PWM output channel. Integer value in the range 0-7 for
          NPCM7XX or 0-11 for NPCM8XX, representing the PWM channel number.

        maximum: 11

      fan-tach-ch:
        $ref: /schemas/types.yaml#/definitions/uint8-array
        description:
          The tach channel(s) used for the fan.
          Integer values in the range 0-15.

        items:
          maximum: 15

      cooling-levels:
        description:
          PWM duty cycle values in a range from 0 to 255 which
          correspond to thermal cooling states. This property enables
          thermal zone integration for automatic fan speed control
          based on temperature.

        items:
          maximum: 255

    required:
      - reg
      - fan-tach-ch

required:
  - compatible
  - reg
  - reg-names
  - clocks
  - clock-names
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    pwm_fan: pwm-fan@103000 {
        compatible = "nuvoton,npcm750-pwm-fan";
        #address-cells = <1>;
        #size-cells = <0>;

        reg = <0x103000 0x2000>, <0x180000 0x8000>;
        reg-names = "pwm", "fan";

        clocks = <&clk NPCM7XX_CLK_APB3>, <&clk NPCM7XX_CLK_APB4>;
        clock-names = "pwm", "fan";

        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pins &fanin0_pins>;

        fan@0 {
            reg = <0>;
            fan-tach-ch = <0 1>;
            cooling-levels = <64 128 192 255>;
        };

        fan@1 {
            reg = <1>;
            fan-tach-ch = <2>;
        };
    };