// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3576.dtsi"

/ {
	model = "Rockchip RK3576 EVB V10 Board";
	compatible = "rockchip,rk3576-evb1-v10", "rockchip,rk3576";

	aliases {
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
	};

	chosen: chosen {
		stdout-path = "serial0:1500000n8";
	};

	adc_keys: adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 1>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;
		poll-interval = <100>;

		button-back {
			label = "back";
			linux,code = <KEY_BACK>;
			press-threshold-microvolt = <1235000>;
		};

		button-menu {
			label = "menu";
			linux,code = <KEY_MENU>;
			press-threshold-microvolt = <890000>;
		};

		button-vol-down {
			label = "volume down";
			linux,code = <KEY_VOLUMEDOWN>;
			press-threshold-microvolt = <417000>;
		};

		button-vol-up {
			label = "volume up";
			linux,code = <KEY_VOLUMEUP>;
			press-threshold-microvolt = <17000>;
		};
	};

	hdmi-con {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	leds: leds {
		compatible = "gpio-leds";

		work_led: led-0 {
			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

	vbus5v0_typec: regulator-vbus5v0-typec {
		compatible = "regulator-fixed";
		regulator-name = "vbus5v0_typec";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vcc5v0_device>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb_otg0_pwren>;
	};

	vcc12v_dcin: regulator-vcc12v-dcin {
		compatible = "regulator-fixed";
		regulator-name = "vcc12v_dcin";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc1v2_ufs_vccq_s0";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
		vin-supply = <&vcc_sys>;
	};

	vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc1v8_ufs_vccq2_s0";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc_1v8_s3>;
	};

	vcc3v3_lcd_n: regulator-vcc3v3-lcd0-n {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_lcd0_n";
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vcc_3v3_s0>;
	};

	vcc3v3_pcie1: regulator-vcc3v3-pcie1 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie1";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <5000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_rtc_s5";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_sys>;
	};

	vcc5v0_device: regulator-vcc5v0-device {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_device";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc5v0_host: regulator-vcc5v0-host {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_host";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vcc5v0_device>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb_host_pwren>;
	};

	vcc_sys: regulator-vcc5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v1_nldo_s3";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1100000>;
		vin-supply = <&vcc_sys>;
	};

	vcc_1v8_s0: regulator-vcc-1v8-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v8_s0";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc_1v8_s3>;
	};

	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_2v0_pldo_s3";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <2000000>;
		regulator-max-microvolt = <2000000>;
		vin-supply = <&vcc_sys>;
	};

	vcc_3v3_s0: regulator-vcc-3v3-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_3v3_s0";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_3v3_s3>;
	};

	vcc3v3_sd: regulator-vcc-3v3-sd {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc_pwren>;
		regulator-name = "vcc3v3_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_3v3_s0>;
	};

	vcc_ufs_s0: regulator-vcc-ufs-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_ufs_s0";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_sys>;
	};

	vcc_wifi_reg_on: regulator-wifi-reg-on {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&wifi_reg_on>;
		pinctrl-names = "default";
		regulator-name = "wifi_reg_on";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc_1v8_s3>;
	};

	sound {
		compatible = "simple-audio-card";
		pinctrl-names = "default";
		pinctrl-0 = <&hp_det>;
		simple-audio-card,name = "On-board Analog ES8388";
		simple-audio-card,aux-devs = <&hp_power>, <&spk_power>;
		simple-audio-card,bitclock-master = <&masterdai>;
		simple-audio-card,format = "i2s";
		simple-audio-card,frame-master = <&masterdai>;
		simple-audio-card,hp-det-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,pin-switches = "Headphones", "Speaker", "Main Mic", "Headset Mic";
		simple-audio-card,routing =
			"Headphone Power INL", "LOUT1",
			"Headphone Power INR", "ROUT1",
			"Speaker Power INL", "LOUT2",
			"Speaker Power INR", "ROUT2",
			"Headphones", "Headphone Power OUTL",
			"Headphones", "Headphone Power OUTR",
			"Speaker", "Speaker Power OUTL",
			"Speaker", "Speaker Power OUTR",
			"LINPUT1", "Main Mic",
			"LINPUT2", "Main Mic",
			"RINPUT1", "Headset Mic",
			"RINPUT2", "Headset Mic";
		simple-audio-card,widgets =
			"Microphone", "Main Mic",
			"Microphone", "Headset Mic",
			"Headphone", "Headphones",
			"Speaker", "Speaker";

		simple-audio-card,cpu {
			sound-dai = <&sai1>;
		};

		masterdai: simple-audio-card,codec {
			sound-dai = <&es8388>;
			system-clock-frequency = <12288000>;
		};
	};

	hp_power: headphone-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&hp_ctl>;
		sound-name-prefix = "Headphone Power";
	};

	spk_power: speaker-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spk_ctl>;
		sound-name-prefix = "Speaker Power";
		VCC-supply = <&vcc5v0_device>;
	};
};

&cpu_l0 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_b0 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&combphy0_ps {
	status = "okay";
};

&combphy1_psu {
	status = "okay";
};

&gmac0 {
	clock_in_out = "output";
	phy-mode = "rgmii-rxid";
	phy-handle = <&rgmii_phy0>;
	pinctrl-names = "default";
	pinctrl-0 = <&eth0m0_miim
		     &eth0m0_tx_bus2
		     &eth0m0_rx_bus2
		     &eth0m0_rgmii_clk
		     &eth0m0_rgmii_bus
		     &ethm0_clk0_25m_out>;
	tx_delay = <0x21>;
	status = "okay";
};

&gmac1 {
	clock_in_out = "output";
	phy-handle = <&rgmii_phy1>;
	phy-mode = "rgmii-rxid";
	pinctrl-names = "default";
	pinctrl-0 = <&eth1m0_miim
		     &eth1m0_tx_bus2
		     &eth1m0_rx_bus2
		     &eth1m0_rgmii_clk
		     &eth1m0_rgmii_bus
		     &ethm0_clk1_25m_out>;
	tx_delay = <0x20>;
	status = "okay";
};

&gpu {
	mali-supply = <&vdd_gpu_s0>;
	status = "okay";
};

&hdmi {
	frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
	pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>;
	pinctrl-names = "default";
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	status = "okay";
};

&hdptxphy {
	status = "okay";
};

&i2c1 {
	status = "okay";

	rk806: pmic@23 {
		compatible = "rockchip,rk806";
		reg = <0x23>;
		interrupt-parent = <&gpio0>;
		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
		gpio-controller;
		#gpio-cells = <2>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
		system-power-controller;

		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc5-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc7-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_sys>;
		vcc9-supply = <&vcc_sys>;
		vcc10-supply = <&vcc_sys>;
		vcc11-supply = <&vcc_2v0_pldo_s3>;
		vcc12-supply = <&vcc_sys>;
		vcc13-supply = <&vcc_1v1_nldo_s3>;
		vcc14-supply = <&vcc_1v1_nldo_s3>;
		vcca-supply = <&vcc_sys>;

		rk806_dvs1_null: dvs1-null-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun0";
		};

		rk806_dvs2_null: dvs2-null-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun0";
		};

		rk806_dvs3_null: dvs3-null-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun0";
		};

		rk806_dvs1_slp: dvs1-slp-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun1";
		};

		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun2";
		};

		rk806_dvs1_rst: dvs1-rst-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun3";
		};

		rk806_dvs2_slp: dvs2-slp-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun1";
		};

		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun2";
		};

		rk806_dvs2_rst: dvs2-rst-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun3";
		};

		rk806_dvs2_dvs: dvs2-dvs-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun4";
		};

		rk806_dvs2_gpio: dvs2-gpio-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun5";
		};

		rk806_dvs3_slp: dvs3-slp-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun1";
		};

		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun2";
		};

		rk806_dvs3_rst: dvs3-rst-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun3";
		};

		rk806_dvs3_dvs: dvs3-dvs-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun4";
		};

		rk806_dvs3_gpio: dvs3-gpio-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun5";
		};

		regulators {
			vdd_cpu_big_s0: dcdc-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;
				regulator-name = "vdd_cpu_big_s0";
				regulator-enable-ramp-delay = <400>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_npu_s0: dcdc-reg2 {
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;
				regulator-name = "vdd_npu_s0";
				regulator-enable-ramp-delay = <400>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_cpu_lit_s0: dcdc-reg3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;
				regulator-name = "vdd_cpu_lit_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
					regulator-suspend-microvolt = <750000>;
				};
			};

			vcc_3v3_s3: dcdc-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_3v3_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vdd_gpu_s0: dcdc-reg5 {
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <900000>;
				regulator-ramp-delay = <12500>;
				regulator-name = "vdd_gpu_s0";
				regulator-enable-ramp-delay = <400>;

				regulator-state-mem {
					regulator-off-in-suspend;
					regulator-suspend-microvolt = <850000>;
				};
			};

			vddq_ddr_s0: dcdc-reg6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vddq_ddr_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_logic_s0: dcdc-reg7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <800000>;
				regulator-name = "vdd_logic_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8_s3: dcdc-reg8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vdd2_ddr_s3: dcdc-reg9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vdd2_ddr_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_ddr_s0: dcdc-reg10 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vdd_ddr_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_1v8_s0: pldo-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca_1v8_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pldo2_s0: pldo-reg2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pldo2_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_1v2_s0: pldo-reg3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vdda_1v2_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_3v3_s0: pldo-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcca_3v3_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd_s0: pldo-reg5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pldo6_s3: pldo-reg6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pldo6_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vdd_0v75_s3: nldo-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <750000>;
				regulator-name = "vdd_0v75_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <750000>;
				};
			};

			vdda_ddr_pll_s0: nldo-reg2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-name = "vdda_ddr_pll_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v75_hdmi_s0: nldo-reg3 {
				regulator-boot-on;
				regulator-min-microvolt = <837500>;
				regulator-max-microvolt = <837500>;
				regulator-name = "vdda0v75_hdmi_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v85_s0: nldo-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-name = "vdda_0v85_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v75_s0: nldo-reg5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;
				regulator-name = "vdda_0v75_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};
};

&i2c2 {
	status = "okay";

	hym8563: rtc@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		clock-output-names = "hym8563";
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int>;
		wakeup-source;
		#clock-cells = <0>;
	};
};

&i2c3 {
	status = "okay";

	es8388: audio-codec@10 {
		compatible = "everest,es8388", "everest,es8328";
		reg = <0x10>;
		AVDD-supply = <&vcca_3v3_s0>;
		DVDD-supply = <&vcc_1v8_s0>;
		HPVDD-supply = <&vcca_3v3_s0>;
		PVDD-supply = <&vcc_1v8_s0>;
		assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
		assigned-clock-rates = <12288000>;
		clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
		pinctrl-names = "default";
		pinctrl-0 = <&sai1m0_mclk>;
		#sound-dai-cells = <0>;
	};
};

&mdio0 {
	rgmii_phy0: ethernet-phy@1 {
		compatible = "ethernet-phy-id001c.c916";
		reg = <0x1>;
		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
		assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
		assigned-clock-rates = <25000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&rgmii_phy0_rst>;
		reset-assert-us = <20000>;
		reset-deassert-us = <100000>;
		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
	};
};

&mdio1 {
	rgmii_phy1: ethernet-phy@1 {
		compatible = "ethernet-phy-id001c.c916";
		reg = <0x1>;
		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
		assigned-clocks = <&cru REFCLKO25M_GMAC1_OUT>;
		assigned-clock-rates = <25000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&rgmii_phy1_rst>;
		reset-assert-us = <20000>;
		reset-deassert-us = <100000>;
		reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
	};
};

&pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie0_rst>;
	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc_3v3_s3>;
	status = "okay";

	pcie@0,0 {
		reg = <0x0 0 0 0 0>;
		bus-range = <0x0 0xf>;
		device_type = "pci";
		ranges;
		#address-cells = <3>;
		#size-cells = <2>;

		wifi: wifi@0,0 {
			compatible = "pci14e4,449d";
			reg = <0x10000 0 0 0 0>;
			clocks = <&hym8563>;
			clock-names = "lpo";
		};
	};
};

&pcie1 {
	reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie1>;

	/*
	 * Disable usb_drd1_dwc3 if enabling pcie1 and set Dial_Switch_1
	 * to low state according to the schematic of page 17.
	 */
	status = "disabled";
};

&pinctrl {
	audio {
		hp_det: hp-det {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		hp_ctl: hp-ctl {
			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		spk_ctl: spk-ctl {
			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	bluetooth {
		bt_reg_on: bt-reg-on {
			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		bt_wake_host: bt-wake-host {
			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		host_wake_bt: host-wake-bt {
			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	hdmi {
		hdmi_tx_on_h: hdmi-tx-on-h {
			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	hym8563 {
		rtc_int: rtc-int {
			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	network {
		rgmii_phy0_rst: rgmii-phy0-rst {
			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		rgmii_phy1_rst: rgmii-phy1-rst {
			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pcie0 {
		pcie0_rst: pcie0-rst {
			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	sdmmc {
		sdmmc_pwren: sdmmc-pwren {
			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		usb_host_pwren: usb-host-pwren {
			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		usb_otg0_pwren: usb-otg0-pwren {
			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		usbc0_int: usbc0-int {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	wifi {
		wifi_reg_on: wifi-reg-on {
			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		wifi_wake_host: wifi-wake-host {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};
};

&sai1 {
	pinctrl-names = "default";
	pinctrl-0 = <&sai1m0_lrck
		     &sai1m0_sclk
		     &sai1m0_sdi0
		     &sai1m0_sdo0>;
	status = "okay";
};

&sai6 {
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	full-pwr-cycle-in-suspend;
	max-frequency = <200000000>;
	mmc-hs400-1_8v;
	mmc-hs400-enhanced-strobe;
	no-sdio;
	no-sd;
	non-removable;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-sd-highspeed;
	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
	disable-wp;
	max-frequency = <200000000>;
	no-sdio;
	no-mmc;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_bus4>;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc3v3_sd>;
	vqmmc-supply = <&vccio_sd_s0>;
	status = "okay";
};

&saradc {
	vref-supply = <&vcca_1v8_s0>;
	status = "okay";
};

&u2phy0 {
	status = "okay";
};

&u2phy0_otg {
	phy-supply = <&vbus5v0_typec>;
	status = "okay";
};

&u2phy1 {
	status = "okay";
};

&u2phy1_otg {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&uart0 {
	status = "okay";
};

&uart4 {
	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
	pinctrl-names = "default";
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm43438-bt";
		clocks = <&hym8563>;
		clock-names = "lpo";
		device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
		pinctrl-names = "default";
		shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
		vbat-supply = <&vcc_3v3_s3>;
		vddio-supply = <&vcc_1v8_s3>;
	};
};

&ufshc {
	status = "okay";
};

&usbdp_phy {
	rockchip,dp-lane-mux = <2 3>;
	status = "okay";
};

&usb_drd0_dwc3 {
	dr_mode = "host";
	status = "okay";
};

&usb_drd1_dwc3 {
	dr_mode = "host";
	status = "okay";
};

&vop {
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};