=========================
Kernel driver i2c-sis5595
=========================
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Mark D. Studebaker <mdsxyz123@yahoo.com>,
- Philip Edelbrock <phil@netroedge.com>
Supported adapters:
* Silicon Integrated Systems Corp. SiS5595 Southbridge
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
Note: all have mfr. ID 0x1039.
========= ======
SUPPORTED PCI ID
========= ======
5595 0008
========= ======
Note: these chips contain a 0008 device which is incompatible with the
5595. We recognize these by the presence of the listed
"blacklist" PCI ID and refuse to load.
============= ====== ================
NOT SUPPORTED PCI ID BLACKLIST PCI ID
============= ====== ================
540 0008 0540
550 0008 0550
5513 0008 5511
5581 0008 5597
5582 0008 5597
5597 0008 5597
5598 0008 5597/5598
630 0008 0630
645 0008 0645
646 0008 0646
648 0008 0648
650 0008 0650
651 0008 0651
730 0008 0730
735 0008 0735
745 0008 0745
746 0008 0746
============= ====== ================
Module Parameters
-----------------
================== =====================================================
force_addr=0xaddr Set the I/O base address. Useful for boards
that don't set the address in the BIOS. Does not do a
PCI force; the device must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
================== =====================================================
Description
-----------
i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595
southbridges.
WARNING: If you are trying to access the integrated sensors on the SiS5595
chip, you want the sis5595 driver for those, not this driver. This driver
is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP
drivers to access chips on the bus.