# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: X-Powers AXP PMIC
maintainers:
- Chen-Yu Tsai <wens@csie.org>
allOf:
- if:
properties:
compatible:
contains:
enum:
- x-powers,axp152
- x-powers,axp202
- x-powers,axp209
then:
properties:
regulators:
properties:
x-powers,dcdc-freq:
minimum: 750
maximum: 1875
default: 1500
else:
properties:
regulators:
properties:
x-powers,dcdc-freq:
minimum: 1800
maximum: 4050
default: 3000
- if:
properties:
compatible:
contains:
enum:
- x-powers,axp152
- x-powers,axp202
- x-powers,axp209
then:
properties:
x-powers,drive-vbus-en: false
- if:
not:
properties:
compatible:
contains:
const: x-powers,axp806
then:
properties:
x-powers,self-working-mode: false
x-powers,master-mode: false
- if:
not:
properties:
compatible:
contains:
const: x-powers,axp305
then:
required:
- interrupts
- if:
properties:
compatible:
contains:
enum:
- x-powers,axp313a
- x-powers,axp15060
then:
properties:
x-powers,dcdc-freq: false
properties:
compatible:
oneOf:
- enum:
- x-powers,axp152
- x-powers,axp192
- x-powers,axp202
- x-powers,axp209
- x-powers,axp221
- x-powers,axp223
- x-powers,axp313a
- x-powers,axp803
- x-powers,axp806
- x-powers,axp809
- x-powers,axp813
- x-powers,axp15060
- items:
- const: x-powers,axp228
- const: x-powers,axp221
- items:
- const: x-powers,axp805
- const: x-powers,axp806
- items:
- const: x-powers,axp305
- const: x-powers,axp805
- const: x-powers,axp806
- items:
- const: x-powers,axp818
- const: x-powers,axp813
reg:
maxItems: 1
interrupts:
maxItems: 1
interrupt-controller: true
"#interrupt-cells":
const: 1
x-powers,drive-vbus-en:
type: boolean
description: >
Set this when the N_VBUSEN pin is used as an output pin to control an
external regulator to drive the OTG VBus, rather then as an input pin
which signals whether the board is driving OTG VBus or not.
x-powers,self-working-mode:
type: boolean
description: >
Set this when the PMIC is wired for self-working mode through the MODESET
pin.
x-powers,master-mode:
type: boolean
description: >
Set this when the PMIC is wired for master mode through the MODESET pin.
vin1-supply:
description: >
DCDC1 power supply node, if present.
vin2-supply:
description: >
DCDC2 power supply node, if present.
vin3-supply:
description: >
DCDC3 power supply node, if present.
vin4-supply:
description: >
DCDC4 power supply node, if present.
vin5-supply:
description: >
DCDC5 power supply node, if present.
vin6-supply:
description: >
DCDC6 power supply node, if present.
vin7-supply:
description: >
DCDC7 power supply node, if present.
vina-supply:
description: >
DCDCA power supply node, if present.
vinb-supply:
description: >
DCDCB power supply node, if present.
vinc-supply:
description: >
DCDCC power supply node, if present.
vind-supply:
description: >
DCDCD power supply node, if present.
vine-supply:
description: >
DCDCE power supply node, if present.
acin-supply:
description: >
LDO1 power supply node, if present.
ldo24in-supply:
description: >
LDO2 and LDO4 power supply node, if present.
ldo3in-supply:
description: >
LDO3 power supply node, if present.
ldo5in-supply:
description: >
LDO5 power supply node, if present.
aldoin-supply:
description: >
ALDO* power supply node, if present.
bldoin-supply:
description: >
BLDO* power supply node, if present.
cldoin-supply:
description: >
CLDO* power supply node, if present.
dldoin-supply:
description: >
DLDO* power supply node, if present.
eldoin-supply:
description: >
ELDO* power supply node, if present.
fldoin-supply:
description: >
FLDO* power supply node, if present.
ips-supply:
description: >
LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present.
drivevbus-supply:
description: >
DRIVEVBUS power supply node, if present.
swin-supply:
description: >
SW power supply node, if present.
adc:
$ref: /schemas/iio/adc/x-powers,axp209-adc.yaml#
gpio:
$ref: /schemas/gpio/x-powers,axp209-gpio.yaml#
ac-power:
$ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
battery-power:
$ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
usb-power:
$ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
regulators:
type: object
properties:
x-powers,dcdc-freq:
$ref: /schemas/types.yaml#/definitions/uint32
description: >
Defines the work frequency of DC-DC in kHz.
patternProperties:
"^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$":
$ref: /schemas/regulator/regulator.yaml#
type: object
unevaluatedProperties: false
properties:
regulator-ramp-delay:
description: >
Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
the AXP209.
regulator-soft-start:
description: >
Only valid for the LDO3 regulator.
x-powers,dcdc-workmode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description: >
Only valid for DCDC regulators. Setup 1 for PWM mode, 0
for AUTO (PWM/PFM) mode. The DCDC regulators work in a
mixed PWM/PFM mode, using PFM under light loads and
switching to PWM for heavier loads. Forcing PWM mode
trades efficiency under light loads for lower output
noise. This probably makes sense for HiFi audio related
applications that aren't battery constrained.
additionalProperties: false
required:
- compatible
- reg
- "#interrupt-cells"
- interrupt-controller
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@30 {
compatible = "x-powers,axp152";
reg = <0x30>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power {
compatible = "x-powers,axp202-ac-power-supply";
};
axp_adc: adc {
compatible = "x-powers,axp209-adc";
#io-channel-cells = <1>;
};
axp_gpio: gpio {
compatible = "x-powers,axp209-gpio";
gpio-controller;
#gpio-cells = <2>;
gpio0-adc-pin {
pins = "GPIO0";
function = "adc";
};
};
battery_power_supply: battery-power {
compatible = "x-powers,axp209-battery-power-supply";
};
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <1500>;
reg_dcdc2: dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vdd-cpu";
};
reg_dcdc3: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
reg_ldo1: ldo1 {
/* LDO1 is a fixed output regulator */
regulator-always-on;
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-rtc";
};
reg_ldo2: ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
reg_ldo3: ldo3 {
regulator-name = "ldo3";
};
reg_ldo4: ldo4 {
regulator-name = "ldo4";
};
reg_ldo5: ldo5 {
regulator-name = "ldo5";
};
};
usb_power_supply: usb-power {
compatible = "x-powers,axp202-usb-power-supply";
};
};
};