# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SuperSpeed DWC3 USB SoC controller
maintainers:
- Wesley Cheng <quic_wcheng@quicinc.com>
properties:
compatible:
items:
- enum:
- qcom,ipq4019-dwc3
- qcom,ipq5332-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs404-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
- qcom,sdm660-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sm4250-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm6350-dwc3
- qcom,sm6375-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
- const: qcom,dwc3
reg:
description: Offset and length of register set for QSCRATCH wrapper
maxItems: 1
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
power-domains:
description: specifies a phandle to PM domain provider node
maxItems: 1
required-opps:
maxItems: 1
clocks:
description: |
Several clocks are used, depending on the variant. Typical ones are::
- cfg_noc:: System Config NOC clock.
- core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
60MHz for HS operation.
- iface:: System bus AXI clock.
- sleep:: Sleep clock, used for wakeup when USB3 core goes into low
power mode (U3).
- mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
mode. Its frequency should be 19.2MHz.
minItems: 1
maxItems: 9
clock-names:
minItems: 1
maxItems: 9
resets:
maxItems: 1
interconnects:
maxItems: 2
interconnect-names:
items:
- const: usb-ddr
- const: apps-usb
interrupts:
minItems: 1
maxItems: 4
interrupt-names:
minItems: 1
maxItems: 4
qcom,select-utmi-as-pipe-clk:
description:
If present, disable USB3 pipe_clk requirement.
Used when dwc3 operates without SSPHY and only
HS/FS/LS modes are supported.
type: boolean
wakeup-source: true
# Required child node:
patternProperties:
"^usb@[0-9a-f]+$":
$ref: snps,dwc3.yaml#
unevaluatedProperties: false
properties:
wakeup-source: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- ranges
- clocks
- clock-names
- interrupts
- interrupt-names
allOf:
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-dwc3
then:
properties:
clocks:
maxItems: 3
clock-names:
items:
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq8064-dwc3
then:
properties:
clocks:
items:
- description: Master/Core clock, has to be >= 125 MHz
for SS operation and >= 60MHz for HS operation.
clock-names:
items:
- const: core
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sm6350-dwc3
then:
properties:
clocks:
maxItems: 5
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq6018-dwc3
then:
properties:
clocks:
minItems: 3
maxItems: 4
clock-names:
oneOf:
- items:
- const: core
- const: sleep
- const: mock_utmi
- items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq8074-dwc3
then:
properties:
clocks:
maxItems: 4
clock-names:
items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq5332-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
then:
properties:
clocks:
maxItems: 4
clock-names:
items:
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,sc8280xp-dwc3
then:
properties:
clocks:
maxItems: 9
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: noc_aggr
- const: noc_aggr_north
- const: noc_aggr_south
- const: noc_sys
- if:
properties:
compatible:
contains:
enum:
- qcom,sdm660-dwc3
then:
properties:
clocks:
minItems: 5
maxItems: 6
clock-names:
oneOf:
- items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: bus
- items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- const: bus
- if:
properties:
compatible:
contains:
enum:
- qcom,qcm2290-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
then:
properties:
clocks:
minItems: 6
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: xo
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8350-dwc3
then:
properties:
clocks:
minItems: 5
maxItems: 6
clock-names:
minItems: 5
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: xo
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
- qcom,sc7180-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sm4250-dwc3
- qcom,sm6125-dwc3
- qcom,sm6350-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
then:
properties:
interrupts:
items:
- description: The interrupt that is asserted
when a wakeup event is received on USB2 bus.
- description: The interrupt that is asserted
when a wakeup event is received on USB3 bus.
- description: Wakeup event on DM line.
- description: Wakeup event on DP line.
interrupt-names:
items:
- const: hs_phy_irq
- const: ss_phy_irq
- const: dm_hs_phy_irq
- const: dp_hs_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,sm6115-dwc3
then:
properties:
interrupts:
maxItems: 2
interrupt-names:
items:
- const: hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq5332-dwc3
- qcom,sdm660-dwc3
then:
properties:
interrupts:
minItems: 1
maxItems: 2
interrupt-names:
minItems: 1
items:
- const: hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,sc7280-dwc3
then:
properties:
interrupts:
minItems: 3
maxItems: 4
interrupt-names:
minItems: 3
items:
- const: hs_phy_irq
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,sc8280xp-dwc3
then:
properties:
interrupts:
maxItems: 4
interrupt-names:
items:
- const: pwr_event
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,sa8775p-dwc3
then:
properties:
interrupts:
minItems: 3
maxItems: 4
interrupt-names:
minItems: 3
items:
- const: pwr_event
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
usb@a6f8800 {
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x740 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
};